1 April 2021 in Review of Scientific Instruments
We describe the design, commissioning, and operation of an ultra-low-vibration closed-cycle cryogenic ion trap apparatus. One hundred lines for low-frequency signals and eight microwave/radio frequency coaxial feed-lines offer the possibility of implementing a small-scale ion-trap quantum processor or simulator. With all supply cables attached, more than 1.3 W of cooling power at 5 K is still available for absorbing energy from electrical pulses introduced to control ions. The trap itself is isolated from vibrations induced by the cold head using a helium exchange gas interface. The performance of the vibration isolation system has been characterized using a Michelson interferometer, finding residual vibration amplitudes on the order of 10 nm rms. Trapping of 9Be+ ions has been demonstrated using a combination of laser ablation and photoionization.
16 January 2017 in Applied Physics Letters
We develop an intuitive model of 2D microwave near-fields in the unusual regime of centimeter waves localized to tens of microns. Close to an intensity minimum, a simple effective description emerges with five parameters that characterize the strength and spatial orientation of the zero and first order terms of the near-field, as well as the field polarization. Such a field configuration is realized in a microfabricated planar structure with an integrated microwave conductor operating near 1 GHz. We use a single 9 ion as a high-resolution quantum sensor to measure the field distribution through energy shifts in its hyperfine structure. We find agreement with simulations at the sub-micron and few-degree level. Our findings give a clear and general picture of the basic properties of oscillatory 2D near-fields with applications in quantum information processing, neutral atom trapping and manipulation, chip-scale atomic clocks, and integrated microwave circuits.
19 May 2025 in IEEE Transactions on Instrumentation and Measurement
This paper presents a Digital-to-Analog Converter (DAC) for shuttling operations in a trapped-ion quantum computer (TIQC) measured at 4.6 K.We provide an extensive analysis and comparison of measured characteristics at room temperature (RT) versus those at cryogenic temperature (CT), particularly focusing on the DAC’s static and dynamic behavior, as well as its noise performance. By making well-conceived analytical design choices, we show that the DAC’s performance at CT can match its performance at RT. This is achieved through sufficient design margins, the selection of suitable components, and the adjustment of biasing voltages. The investigated chip features a 12 bit, resistive R-2R ladder-based DAC, which also comprises an input buffer for the DAC’s reference voltage and a simplistic SPI to read the digital control words. Implemented in Infineon’s 130nm Bipolar-CMOS-DMOS (BCD) technology, the DAC consumes 1.1mW from a 1.5V power supply at RT. Its power consumption increases to around 1.5mW at CT due to necessary biasing adjustments. The DAC’s linearity, characterized by its Differential-Non-Linearity (DNL) and Integral-Non-Linearity (INL) remains almost unchanged across temperatures, aligning with its Spurious-Free Dynamic Range (SFDR). The slew-rate (SR) decreases toward CT compared to RT. While the thermal noise floor also decreases, the low-frequency noise increases at CT. Overall, this leads to a slight decrease in the DAC’s noise performance at 4.6K.
28 June 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
This work presents a frequency doubler (FD) for a microwave-control system intended for an 171Yb+ ion-trap-based quantum computer. The circuit is optimized for frequency multiplication from 11 GHz to 13 GHz with a ≥ 29 dBc fundamental-and third harmonic rejection over the entire frequency range and peak HRR1/HRR3 of 37 dBc/39 dBc. This enables the microwave frequency generation to drive the hyperfine transitions in the electronic ground state of an 171Yb+ ion at 12.6 GHz. Cryogenic measurements of the FD down to 4.5K enable circuit functionality verification for the intended low-temperature operation. Additionally, insights into the cryogenic temperature effects of the employed BiCMOS technology are obtained and used to derive a biasing control methodology for constant performance in the temperature range of 300K to 4.5 K. The proposed circuit is silicon-proven and fabricated in a 0.13μm SiGe BiCMOS process, consuming a core area of only 0.034mm2.
2 December 2025 in IEEE Journal of Solid-State Circuits
This article presents a cryo-BiCMOS system on chip (SoC) designed for single and two-qubit gate operations for quantum computers (QCs) based on beryllium trapped-ions (TIs). Signal generation from 0.7 to 1.6 GHz is supported, covering all microwave transitions in a ${}^{9}\text {Be}^{+}$ QC realization. An integrated 48-kbit waveform memory is implemented for improved two-qubit gate fidelity. The fabricated IC is verified in a 4 K environment with up to 4 qubits, thus enabling quantum processor unit (QPU) cointegration. IC operation up to RT ensures compatibility with future system realizations. Measurements demonstrate qubit state control with an oscillation amplitude of 94% before SPAM correction and Rabi oscillation rate of 172 kHz. Evaluations of long sequences of $\sigma _{x}$ gates indicate control of the quantum state with high quality. Interaction with one computational zone is possible at a total power consumption of 86 mW translating to 21.5 mW/qubit in the presented measurements. Comparison with the state-of-the-art controller reveals drastic power and form-factor reduction at comparable performance, thus paving the way for a scalable TI platform. The chip is fabricated in a 0.13- $\mathrm {\mu }\mathrm {m}$ SiGe BiCMOS technology. To the best of our knowledge, this is the first reported from-scratch system design for TI-based QC concluding with a qubit state manipulation demonstration.