Marius Neumann

Marius Neumann

Auto-generated profile, based on publicly available information

Marius Neumann

Institut fr Elektrische Messtechnik und Grundlagen der Elektrotechnik, Technische Universitt Braunschweig, Braunschweig, Germany

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 December 2024 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
MPMax Pröpper
Max Pröpper
DHDominik Hanisch
Dominik Hanisch
CSChristoph Schmid
Christoph Schmid
MNMarius Neumann
Marius Neumann
PRPaul Julius Ritter
Paul Julius Ritter
BHBenedikt Hampel
Benedikt Hampel
The development of a fabrication process for Josephson junctions (JJs) using a direct-write helium-focused ion beam (He-FIB) technique provides the opportunity to control parameters such as the critical current $I_{\mathrm{c}}$ and normal-state resistance $R_{\mathrm{n}}$ of individual JJs in YBa$_{2}$Cu$_{3}$O$_{7-\mathrm{x}}$ JJ arrays. Such arrays could be used as a voltage calibration standard that is operated at higher temperatures and higher driving frequencies than the currently used niobium JJ arrays. This study presents the fabrication process of 79 YBa$_{2}$Cu$_{3}$O$_{7-\mathrm{x}}$ JJs in a meander array design using a direct writing He-FIB process with the same irradiation dose for all JJs. In this design, each of the JJs can be measured individually, and adjacent JJs that exhibit similar and suitable parameters for a voltage standard array can be measured in series. The scattering of the JJ parameters was investigated at 5 K and resulted in a spread in $I_{\mathrm{c}}$ of about 60% and in $R_{\mathrm{n}}$ of 25%. However, a couple of subarrays with a spread lower than 10% could be found. In addition, these JJ subarrays were irradiated with high-frequency radiation in the GHz and THz range at a temperature of 20 K and synchronization of up to three JJs was observed in both frequency ranges.

12 January 2024 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
MPM. Pröpper
M. Pröpper
DHD. Hanisch
D. Hanisch
CSC. Schmid
C. Schmid
PRP. J. Ritter
P. J. Ritter
MNM. Neumann
M. Neumann
BHB. Hampel
B. Hampel
Josephson junctions with customizable parameters, including critical current $I$ c and normal state resistance $R$ n , hold great promise across a wide range of applications. Notably, high-temperature superconductors like YBa 2 Cu 3 O 7-x have been interesting since their discovery due to their simplified cooling requirements. YBa 2 Cu 3 O 7-x Josephson junctions can operate within the terahertz (THz) frequency range, rendering them highly suitable for various applications. To maximize their suitability at these high frequencies, it is imperative to precisely determine their THz parameters. Helium focused ion beam (He-FIB) technology is a very promising fabrication method for customizable Josephson junctions. It allows precise control of the He-FIB dose during the fabrication of Josephson junctions and facilitates the fine-tuning of I c and R n . This study presents the fabrication process of YBa 2 Cu 3 O 7-x Josephson junctions using He-FIB irradiation and explores the variations of parameters with dose, evaluating their suitability within the THz range. Also, the scattering of parameters of He-FIB Josephson junctions fabricated with the same He-FIB dose is investigated. Additionally, we examine the high-frequency properties of such junctions and scrutinize the associated Shapiro steps within the THz frequency spectrum. We observe an exponential relationship between I c and the He-FIB dose. Moreover, Shapiro steps emerge under the influence of radiation spanning from 40 GHz to as high as 1.4 THz.

1 April 2025 in Review of Scientific Instruments
Verified
Journal Article
Open access
PRP. J. Ritter
P. J. Ritter
MTM.-A. Tucholke
M.-A. Tucholke
MNM. Neumann
M. Neumann
JMJ. F. Mumme
J. F. Mumme
AMA. Meyer
A. Meyer
BHB. Hampel
B. Hampel
Integrated semiconductor circuits operating at cryogenic temperatures can play a crucial role in scaling quantum computing architectures based on trapped-ion and superconducting qubits. Other technologies, such as low-temperature detectors, can also benefit significantly from these circuits. These applications demand high-frequency, cryogenic temperature measurement systems for the thorough characterization of semiconductor components and circuits. This work presents a customizable, high-frequency, fast, and reliable cryogenic measurement setup for measurement temperatures ranging from room temperature to 4.2 K. It features up to two dc probes or two ground-signal-ground probes for frequencies of up to 67 GHz, which can be configured in a 180° or 90° configuration. In addition, up to 48 BeCu wires configured as twisted pairs provide supply and control signals. Furthermore, up to four rf connections can be mounted directly to a printed circuit board. The setup features an optical microscope in the vacuum chamber to position the probes, which is further utilized by a machine vision algorithm, allowing the detection of pads and automatic positioning of the probes over the pads. The hardware is located in a 550 × 500 × 500 mm3 large vacuum chamber with two independent pulse tube cryocoolers with cooling powers of up to 0.9 and 0.4 W at 4.2 K. Exemplary room temperature and cryogenic S-parameter, transient frequency (fT), time-domain, capacitance–voltage, and dc measurements of single transistors and integrated circuits fabricated by Infineon are presented, demonstrating the system’s measurement capability for quantum computing and other applications.

19 May 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Open access
AMAlexander Meyer
Alexander Meyer
PRPaul Julius Ritter
Paul Julius Ritter
MNMarius Neumann
Marius Neumann
PTPeter Toth
Peter Toth
SHSebastian Halama
Sebastian Halama
VIVadim Issakov
Vadim Issakov
This paper presents a Digital-to-Analog Converter (DAC) for shuttling operations in a trapped-ion quantum computer (TIQC) measured at 4.6 K.We provide an extensive analysis and comparison of measured characteristics at room temperature (RT) versus those at cryogenic temperature (CT), particularly focusing on the DAC’s static and dynamic behavior, as well as its noise performance. By making well-conceived analytical design choices, we show that the DAC’s performance at CT can match its performance at RT. This is achieved through sufficient design margins, the selection of suitable components, and the adjustment of biasing voltages. The investigated chip features a 12 bit, resistive R-2R ladder-based DAC, which also comprises an input buffer for the DAC’s reference voltage and a simplistic SPI to read the digital control words. Implemented in Infineon’s 130nm Bipolar-CMOS-DMOS (BCD) technology, the DAC consumes 1.1mW from a 1.5V power supply at RT. Its power consumption increases to around 1.5mW at CT due to necessary biasing adjustments. The DAC’s linearity, characterized by its Differential-Non-Linearity (DNL) and Integral-Non-Linearity (INL) remains almost unchanged across temperatures, aligning with its Spurious-Free Dynamic Range (SFDR). The slew-rate (SR) decreases toward CT compared to RT. While the thermal noise floor also decreases, the low-frequency noise increases at CT. Overall, this leads to a slight decrease in the DAC’s noise performance at 4.6K.

29 January 2026 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
MPMax Pröpper
Max Pröpper
MTMarc-André Tucholke
Marc-André Tucholke
CSChristoph Schmid
Christoph Schmid
OKOliver Kieler
Oliver Kieler
MNMarius Neumann
Marius Neumann
BHBenedikt Hampel
Benedikt Hampel
Recent results with shunted YBa2Cu3O7-x Josephson junctions (JJs) fabricated using direct-writing by helium-focused ion beam (He-FIB) demonstrate that this technology is useful to achieve a YBa2Cu3O7-x voltage standard. By adding a shunt resistor via a subsequent lift-off step, the $\rm{{\mathit{R}}}_\rm{n}$ value and thereby the spread of the JJs can be reduced. These results were achieved with one large shunt across multiple JJs. This study presents different designs of shunt resistors, which allow measuring the JJs individually. The different shunt resistor designs are described and evaluated by comparing measurement results without and with the shunt resistor. These show the desired effect of controlling $\rm{{\mathit{R}}}_\rm{n}$, but also a change in $\rm{{\mathit{I}}}_\rm{c}$ is visible. The spread in parameters is investigated both without and with shunt resistors. Shapiro steps at gigahertz frequencies are presented for single JJs. The study concludes with a comparative measurement between a YBa2Cu3O7-x He-FIB JJ and a Josephson Arbitrary Waveform Synthesizer from PTB Braunschweig, showing a deviation of 0.05% and thus demonstrating its potential applicability.

15 December 2025 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
MPMax Pröpper
Max Pröpper
MTMarc-André Tucholke
Marc-André Tucholke
DHDominik Hanisch
Dominik Hanisch
CSChristoph Schmid
Christoph Schmid
PRPaul Julius Ritter
Paul Julius Ritter
BHBenedikt Hampel
Benedikt Hampel
Fabrication of YBa2Cu3O7-x Josephson junctions (JJs) using a direct-write helium-focused helium ion beam (He-FIB) technique has great potential for various applications due to tunable JJ parameters and arbitrary positioning. This technique allows placing multiple JJs in series to create JJ arrays. They could be used as a voltage standard that is operated at higher temperatures and driving frequencies than the currently used niobium-based JJ arrays. Small YBa2Cu3O7-x He-FIB JJ arrays with superposed Shapiro steps for up to three JJs have already been demonstrated. The number of JJs in the array was limited by the parameter spread of the individual JJs. This study presents WRspice simulations of JJ arrays, which indicate that the normal state resistance $R$n is the most crucial parameter to achieve flat Shapiro steps in JJ arrays. The idea of adding a shunt resistor to the JJ array to deal with the spread in $R$n values is investigated. A new design for GHz frequencies is presented, and the fabrication process is described. The properties of the shunt resistor are evaluated by van der Pauw measurements. Comparison of measurements with and without shunt resistor shows the desired effect of changing the total resistance of the JJ array while maintaining the critical current value. Finally, measurements of JJ arrays demonstrating superposed Shapiro steps at 20 k at GHz frequencies are presented.