31 March 2026 in SSRN Electronic Journal
Spectral selective coatings are indispensable in solar thermal technologies for enhancing energy efficiency by maximizing solar absorption while suppressing thermal re-emission. This work presents a novel, cyanide-free electrodeposition method to develop high-performance selective coatings on aluminum substrates, using an alkaline copper-citrate bath as a sustainable and cost-effective adhesion layer. The copper plating process was evaluated across a pH range of 8.2 to 10.0 and characterized using speciation diagrams, UV-Vis spectrophotometry, cyclic voltammetry, and rotating-disk electrode (RDE) measurements with Koutecký–Levich analysis. Speciation diagrams and electrochemical data revealed that the [Cu2Cit2H-2]4- dimer is the dominant species in the pH 6–11 range. While this complex introduces a kinetic overpotential that suppresses deposition rates, it is fundamental for achieving the surface homogeneity and adhesion needed for subsequent layers. Building upon this optimized copper base, a nickel/black nickel selective coating was synthesized via controlled galvanostatic pulses. The coatings were characterized by reflectance spectroscopy, profilometry, SEM, XPS, FTIR, and XRD. Reflectance measurements prove that the selective coatings achieve a solar absorptance (α) of 94.3 % and a low thermal emittance (ε100) of 21.5 %, significantly outperforming commercial solar paint (α =89.2 % and e100 =59 %). Furthermore, photothermal heating curves confirmed that this electrochemical route yields superior photothermal conversion efficiency (ηST = 89.0 %) and remains thermally stable at 200 °C. This study offers a simplified, scalable, and environmentally friendly alternative for the large-scale implementation of high-efficiency solar thermal collectors.