An engineering approach is implemented for the performance and stability enhancement of perovskite solar cells, through the incorporation of bismuth telluride flakes in the electron transport layer (ETL) and as an interlayer on top of the ETL.
Herein, an azulene–pyridine molecule (AzPy) is implemented in inverted perovskite solar cells (PSCs) for increasing the power conversion efficiency (PCE) and the stability of the devices. The first goal is achieved by depositing a thin layer of AzPy on top of the hole charge transport layer (HTL). The surface engineering of HTL with AzPy improves the perovskite layer formation, thus increasing light absorption and reducing bulk nonradiative recombination while protecting the perovskite from degradation species from the HTL. This approach increases the mean PCE by approximately 6%. The second goal of improving the stability of the devices is mainly achieved by replacing the hydrophilic bathocuproine (BCP) with the more hydrophobic AzPy. By the development of an AzPy layer over the electron transport layer (ETL), the stability of the PSCs is increased under ambient conditions and thermal or light stress, without affecting the PCE. The two proposed interface engineering approaches are both implemented in the device in conjunction with the perovskite surface treatment with n‐hexylammonium bromide, resulting in devices that deliver a PCE of 20.42% and increased thermal and light stability, thus retaining 90% of their initial PCE for more than 1200 h under ambient conditions.
Perovskite indoor photovoltaics (PIPVs) are emerging as a transformative technology for low-light intensity energy harvesting, owing to their high-power conversion efficiencies (PCEs), low-cost fabrication, solution-processability, and compositionally tunable band gaps. In this work, methylammonium-free CsxFA1−xPb(I1−yBry)3 perovskite absorbers were compositionally engineered to achieve band gaps of 1.55, 1.72, and 1.88 eV, enabling matching of the spectral photoresponse with indoor lighting. Devices based on a scalable mesoscopic n–i–p architecture were systematically evaluated under white LED illumination across correlated color temperatures (3000–5500 K) and light intensities from 250 to 1000 lux with an active area of 1 cm2. The 1.72 eV composition exhibited the most promising performance across different light intensities and colors, achieving PCEs of 35.04% at 1000 lux and 36.6% at 250 lux, with a stable device operation of over 2000 hours. On the other hand, the 1.88 eV band-gap variant reached a peak PCE of 37.4% under 250 lux (5500 K); however, performance trade-offs were observed across different color light LEDs. Our combined experimental and theoretical optical–electrical simulations suggest that decreasing trap-assisted recombination in wide-bandgap compositions may further improve PIPV performance across the different illumination conditions. In contrast, devices with 1.55 eV band gap underperformed in such conditions due to suboptimal spectral overlap and utilization. These findings establish bandgap optimization and device architecture as key design principles for high-efficiency, stable PIPVs, advancing their integration into self-powered electronic systems and innovative indoor environments.
Although graphene's superior electrical, optoelectronic, thermal, and mechanical properties have been evident for 20 years now, its poor water dispersibility has hindered its incorporation in many types of applications and technologies. Strong examples of this are biomedical and environmental applications and devices that require non‐toxic, biocompatible media and not toxic organic solvents like N‐N’‐Dimethylformamide, in which graphene is readily dispersible. In this work, we investigate a new way to prepare high‐concentration and stable graphene dispersions in water by employing porphyrin‐based compounds as stabilisers. To this end, electrochemically exfoliated graphene (EEG) and assess the potential of five porphyrins and metalloporphyrins are prepared to disperse EEG in water successfully. The dispersibility and stability of EEG in each porphyrin aqueous solution are evaluated by recording their UV–vis absorption spectra. Two of the synthesised compounds, namely sodium salt of 5,10,15,20‐tetrakis(4‐carboxyphenyl)‐porphyrin or TCPP and sodium salt of [5,10,15,20‐tetrakis(4‐carboxyphenyl)‐porphyrinato]tin(IV) or Sn‐TCPP , are successful in stably dispersing EEG in water. The intermolecular interaction between the EEG flakes and [H 2 TCPP]Na 4 and [Sn(OH) 2 TCPP]Na 4 molecules are investigated via fluorescence emission spectroscopy. Finally, solid thin films of the EEG(TCPP) and EEG(Sn‐TCPP) dispersions are prepared via spray‐coating, and their optoelectronic properties and surface morphology are investigated.