23 January 2018 in IEEE Transactions on Industrial Electronics
A nondissipative equalization scheme based on fuzzy logic control (FLC) is presented to improve the inconsistency of series-connected Lithium-ion batteries. The two-stage bidirectional equalization circuit with energy transferring inductors is designed to implement the equalization of cell to cell for battery packs, and the equalization circuit paves the way for module-based equalization of hardware. Equalization based on the state of charge (SOC) is proposed in this paper, and the Thevenin equivalent circuit model of the Lithium-ion battery, as well as the extended Kalman filter (EKF) algorithm, is employed for SOC estimation. For effective equalization, the FLC is proposed to reduce energy consumption and equalization time. The FLC strategy is constructed with a set of membership functions to describe the equalization behavior of the cell. A comparison of the proposed FLC with the mean-difference algorithm is carried out to validate the advantages of the proposed scheme. Simulation results show that the standard deviation of final SOC reduces by 18.5%, and equalization time decreases by 23% for FLC compared with the mean-difference algorithm under new European driving cycle working conditions. The energy efficiency improves by 5.54% compared with the mean-difference algorithm. In addition, the two-stage bidirectional equalization circuit has good performance and improves the inconsistency.
17 June 2023 in Value, Function, Cost
In reactive power optimization of distribution network, in most cases, the processing of load data is often only for the specific data under a certain operation condition, so it is difficult to classify and process the data of multiple working conditions in a certain operation stage. To solve the above problems, an optimization method basedon convolutional neural network VGG16 (visual geometry group network) is proposed. Firstly, it is classified according to the capacity proportion of transformer in the station area, and three kinds of scenes of light, medium and high are obtained. Then, particle swarm optimization algorithm is used to optimize each kind of scene, and the corresponding optimization strategy is obtained. The effectiveness of this method to solve the problem of dynamic reactive power and voltage in the substation area is verified by simulation.