23 January 2018 in IEEE Transactions on Industrial Electronics
A nondissipative equalization scheme based on fuzzy logic control (FLC) is presented to improve the inconsistency of series-connected Lithium-ion batteries. The two-stage bidirectional equalization circuit with energy transferring inductors is designed to implement the equalization of cell to cell for battery packs, and the equalization circuit paves the way for module-based equalization of hardware. Equalization based on the state of charge (SOC) is proposed in this paper, and the Thevenin equivalent circuit model of the Lithium-ion battery, as well as the extended Kalman filter (EKF) algorithm, is employed for SOC estimation. For effective equalization, the FLC is proposed to reduce energy consumption and equalization time. The FLC strategy is constructed with a set of membership functions to describe the equalization behavior of the cell. A comparison of the proposed FLC with the mean-difference algorithm is carried out to validate the advantages of the proposed scheme. Simulation results show that the standard deviation of final SOC reduces by 18.5%, and equalization time decreases by 23% for FLC compared with the mean-difference algorithm under new European driving cycle working conditions. The energy efficiency improves by 5.54% compared with the mean-difference algorithm. In addition, the two-stage bidirectional equalization circuit has good performance and improves the inconsistency.
10 April 2018 in IEEE Transactions on Control Systems Technology
This brief proposes a prediction method of remaining useful life (RUL) based on Gauss-Hermite particle filter (GHPF) in nonlinear and non-Gaussian systems of Lithium-ion batteries (LIBs). In this brief, to improve the accuracy and reduce the computational complexity of the estimation of state of health (SOH), multiscale extended Kalman filter is proposed to execute state of charge (SOC) and SOH joint estimation with dual time scales because of the slow-varying characteristic of SOH and fast-varying characteristic of SOC. Based on the estimation of SOH, a GHPF is developed to update the parameters of the capacity degradation model in real time and predict the RUL of LIBs. The simulation results show that the proposed prediction method of RUL has a better performance and higher precision than the method based on standard PF.
29 April 2022 in ISA Transactions
11 December 2023 in IEEE Transactions on Intelligent Transportation Systems
The performance of the battery decreases dramatically in the low temperature, and the heating system of the battery in the cold environment consumes considerable energy, which leads to reduced range and increased safety hazards of electric vehicle. This article focuses on an optimal control strategy of battery thermal management system (BTMS) with waste heat recovery for connected electric vehicle (CEV), which improves heating efficiency and minimizes energy consumption. Firstly, to compensate the insufficient heating capacity of heat pump system in low temperature, the battery pack heating system integrated with heat pump air conditioning system (HPACS), waste heat recovery and electric heater is designed. Secondly, to address the problems of the battery slow thermodynamic response and the increased system complexity due to waste heat recovery, a multi-layer nonlinear model predictive control (ML-NMPC) strategy is developed, which utilizes intelligent transportation system (ITS) information to optimize the energy consumption of the integrated system. The upper layer and lower layer controllers coordinate with each other using the long and short speed prediction respectively to solve the problems of multi-layer control, fast implementation and reference trajectory tracking. The simulation results show that the waste heat recovery system can improve the performance of the HPACS, which increases the coefficient of performance (COP) from 1.79 to 2.54. Compared to centralized NMPC, ML-NMPC reduces energy consumption by 10.2% and 13.7% in the insulation stage under NEDC and real driving condition with higher state of health and less computation time, which demonstrates the superior thermal management capability.
24 August 2023 in IEEE Transactions on Transportation Electrification
Excessive temperature affects battery aging and stability, causing a significant impact on the economy and safety of electric vehicle. The battery thermal management(BTM) system is the key to keeping the battery temperature suitable, but it also consumes considerable energy. To minimize energy consumption for maintaining the battery temperature in the optimal range, a novel adaptive Pontryagin’s Minimum Principle(PMP) optimization strategy based on velocity prediction is proposed in this paper, which is achieved by online updating of the co-state in the Hamiltonian function. A multi-mode velocity prediction model based on driving pattern recognition(DPR) is proposed to enhance the accuracy of the prediction. Moreover, the built self-learning Markov pattern recognizer distinguishes real-time driving segments into one of three predefined driving patterns, and the corresponding pattern velocity predictor is selected. The accuracy and effectiveness of the velocity predictor and driving pattern recognizer are verified. A comparison with the results is obtained by adopting typical controllers to indicate the feasibility and effectiveness of the proposed strategy. Additionally, the BTM system energy consumption is evaluated in multiple test cycles and the results show that the energy consumption based on the proposed methods is reduced by 18.9%-24.9% which leads to considerable energy saving.