Hala El Rammouz

Hala El Rammouz

Auto-generated profile, based on publicly available information

Hala El Rammouz

CEA Leti, Univ. Grenoble Alpes , F 38000 Grenoble

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 November 2024 in Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
TKThomas Kaltsounis
Thomas Kaltsounis
MAMohammed EL AMRANI
Mohammed EL AMRANI
DADavid Plaza Arguello
David Plaza Arguello
HRHala El Rammouz
Hala El Rammouz
MLMatthieu Lafossas
Matthieu Lafossas
MCMatthew Charles
Matthew Charles
Selective area growth (SAG) of gallium nitride (GaN) on silicon (Si) wafers efficiently relaxes the tensile stress that is generated in the GaN layer, when the structure is cooled down to room temperature after the growth. Hence, SAG enables the growth of thicker layers that are capable of operating at higher voltages than those grown in 2D layers. In this study, two GaN layers are grown by SAG on 200 mm-diameter Si(111) wafers by metal organic vapor phase epitaxy for the fabrication of pseudo-vertical p–n diodes. During the growth, the SiH4 precursor flow for the first sample was double than that for the second one. The uniformity of the doping concentration of the layers is investigated by scanning spreading resistance microscopy and the p- and n-type doped regions are examined by scanning capacitance microscopy. A low net doping concentration of 1.4 × 1016 cm−3 is extracted from capacitance–voltage measurements and a destructive breakdown occurs at 700 V for a 90 μm-diameter pseudo-vertical p–n diode. These results show the high potential of the SAG of GaN on Si wafers for vertical power devices.

1 December 2025 in Journal of Applied Physics
Verified
Journal Article
Open access
MAMohammed EL AMRANI
Mohammed EL AMRANI
JLJunrui Lyu
Junrui Lyu
XWXinyi Wen
Xinyi Wen
AMAlberto Marcuzzi
Alberto Marcuzzi
DADavid Plaza Arguello
David Plaza Arguello
SCSrabanti Chowdhury
Srabanti Chowdhury
This work demonstrates, for the first time, avalanche breakdown capability in quasi-vertical gallium nitride (GaN) on silicon (Si) substrates employing localized epitaxial growth. On industry-standard 200 mm wafers, we integrated an 8 μm thick GaN drift layer onto Si, enabling the fabrication of 720 V quasi-vertical p–n diodes. This method yields high-performance power devices in CMOS-compatible cleanrooms at a reduced cost. The GaN p–n junctions exhibit a specific on-resistance of 3.3 mΩ cm2, a current on/off ratio exceeding 1010, and a current density of 1.4 kA/cm2 at 10 V. Robust avalanche behavior was confirmed through temperature-dependent reverse bias measurements from 298 to 373 K, and over 3000 over-voltage surge ruggedness was demonstrated by unclamped inductive switching stress tests. These results underscore the advantages of localized epitaxy for achieving high-quality GaN layers on Si, paving the way for scalable integration of high-voltage GaN power devices with conventional Si technology.

8 April 2026 in Journal of Applied Physics
Verified
Journal Article
Open access
MAMohammed EL AMRANI
Mohammed EL AMRANI
DADavid Plaza Arguello
David Plaza Arguello
Julien BuckleyJulien Buckley
Julien Buckley
TKThomas Kaltsounis
Thomas Kaltsounis
HRHala El Rammouz
Hala El Rammouz
DADaniel Alquier
Daniel Alquier
In this study, we present a GaN-on-Si pseudo-vertical p–n diode fabricated using selective area growth (SAG). The device achieved a high current density of 1.5 kA cm−2 and a low specific on-resistance (Ron,sp) of 3.3 mΩ cm2. A very high on/off current ratio (Ion/Ioff) of 1012 was also recorded. Notably, for the first-time using SAG, uniform avalanche breakdown behavior of 850 V was demonstrated through temperature-dependent reverse bias measurements, corresponding to a Baliga figure of merit of 0.2 GW cm−2. These results emphasize the advantages of localized epitaxy in achieving high-quality p–n junctions on Si substrates, paving the way for scalable, high-performance GaN power devices monolithically integrated with Si technology. To evaluate the influence of geometric parameters on epitaxial quality and device performance, the mesa spacing was systematically varied while keeping the diameter fixed. Optimal results were obtained with 5–15 μm spacing, offering the best trade-off between forward conduction efficiency and reverse blocking robustness. This comprehensive investigation underscores the importance of geometric optimization and localized epitaxy in advancing high-performance GaN-on-Si p–n diodes for next-generation power applications.

23 March 2026 in Applied Physics Letters
Verified
Journal Article
Closed access
NINdembi Ignoumba-Ignoumba
Ndembi Ignoumba-Ignoumba
SCsonneville camille
sonneville camille
TKThomas Kaltsounis
Thomas Kaltsounis
VMVishwajeet Maurya
Vishwajeet Maurya
HRHala El Rammouz
Hala El Rammouz
CBCyril Buttay
Cyril Buttay
In this work, using micro-Raman spectroscopy mapping, we propose a methodology to separate the stress effect from the n-doping effect on A1LO and E2H GaN phonon modes frequency for low n-doped (<1017 cm−3) GaN layers grown on various substrates (GaN, sapphire, and silicon). This methodology shows a linear relation between the two phonon modes, in which the slope corresponds to GaN biaxial stress coefficients ratio KA1LOB/KE2HB and is 0.76 ± 0.01. Our value may act as a useful guideline for selecting or refining KE2HB and KA1LOB values. Samples that are mainly biaxially stressed show good agreement with the linear relation independently of the substrate. As for GaN/GaN samples, the change of slope indicates that layers are predominantly under dislocation-induced stress. However, independently of the substrate, the y-intercept increases with the n-carrier concentration, which provides a qualitive estimation of the net doping.

8 September 2026 in Journal of Applied Physics
Verified
Journal Article
Closed access
DADavid Plaza Argüello
David Plaza Argüello
EMEugénie Martinez
Eugénie Martinez
MAMohammed EL AMRANI
Mohammed EL AMRANI
TKThomas Kaltsounis
Thomas Kaltsounis
HRHala El Rammouz
Hala El Rammouz
MCMatthew Charles
Matthew Charles
The influence of surface preparation on the metal–semiconductor interface of pseudo-vertical GaN-on-Si Schottky diodes fabricated by selective-area growth on 200 mm silicon wafers is investigated. Devices were subjected to four surface conditions prior to anode metallization: no treatment, O2 plasma, HCl etching, and O2 plasma followed by HCl treatment. Electrical measurements show that HCl treatment yields the most favorable Schottky behavior, with a higher turn-on voltage (1.0 V) and a lower ideality factor (n ≈ 1), while O2 plasma degrades device performance (VTH = 0.2 and n ≈ 1.9). The combined treatment results in the poorest Schottky characteristics despite a thinner oxide layer than with plasma alone (VTH = 0.1 and n ≈ 2.2). X-ray photoelectron spectroscopy performed before and after Ni deposition reveals that these trends correlate with changes in interfacial oxide chemistry, including effective removal of GaOx by HCl, enhanced oxidation following O2 plasma exposure, and increased disorder in the top layers due to the plasma energy. When applied prior to cathode deposition, the combined treatment of O2 plasma and HCl increases forward current density by a factor of 6 without affecting the forward-bias characteristics, underscoring the interface-specific role of surface preparation. These results highlight the need for tailored surface treatments to optimize the performance of both contacts in GaN Schottky diodes.

4 April 2026
Verified
Thesis
Closed access
HRHala El Rammouz
Hala El Rammouz
Les réseaux de micro-transducteurs connaissent un fort développement afin de répondre aux exigences du contrôle santé intégré des structures. Ce dernier permet d'évaluer en tout moment l'état de santé de la structure tout en intégrant un système de contrôle non destructif à celle-ci. En effet, un réseau de micro-transducteurs permet d'acquérir plusieurs signaux en même temps sans effectuer un balayage spatial permettant de caractériser la structure. Parallèlement, l'utilisation des ondes guidées ultrasonores fournit un outil efficace pour la caractérisation de celle-ci. Cependant, elles présentent des caractéristiques complexes qui rend l'analyse de leurs interactions avec des défauts compliquée. Pour cela, il est souhaitable de favoriser la propagation d'un mode unique dans la structure. Dans ce contexte, le but de cette thèse est de présenter un modèle de matrice de micro-transducteurs pour la réception des ondes guidées dans une structure cylindrique, en particulier, le mode de flexion F(1,1). Dans un premier temps, la réalisation et la caractérisation des matrices de micro-transducteurs sont présentées. Les résultats ont montré la capacité de celles-ci à opérer dans la gamme fréquentielle (60 kHz - 70 kHz) malgré sa haute fréquence de résonance. Dans un deuxième temps, les mesures optiques et électriques effectuées sur la matrice ont validé l'utilisation de celle-ci pour des applications dans le CSI et le CND des structures cylindriques tout en favorisant la propagation du mode F(1,1).