Technological features of the commercial production of detonation-synthesis nanodiamonds at the SINTA Joint-Stock Company and the characteristics of the nanodiamonds and diamond-containing mixtures produced are considered. Nanodiamond applications in the production of composite electrolytic coatings that are based on chromium, nickel, gold, and silver, exhibit good service properties, and save on the use of noble metals and electric power are exemplified. Nanodiamond applications for the modification of plastics, antifriction lubricants, and oxide coatings grown by microarc oxidation of aluminum alloys are also considered. The prospective application of nanodiamonds as a raw material in the synthesis of diamond powders and superhard composites by static and shock-wave loading is demonstrated.
The paper deals with newly uncovered regularities and the effect of the influence of fullerene C60 incorporated into the surface layer of an MAO-coating on the triboformation of a thin film on its surface. The regularities involve the appearance of specific nanostructures under boundary lubrication conditions; the nanostructures are based on carbon and the phases which contain iron and fullerene and are found in the thin plastic layer formed in friction. This considerably enhances the tribological characteristics of the ceramic coatings: depending on the contact pressure, the friction coefficient is 1.6–3 times lower and the wear resistance is 2.4–7 times higher than those of nonmodified ceramics. The range of the working pressure for the coatings becomes much wider.
The structure and tribological properties of Ni-B and Co-B galvanic coatings with boron concentration from 4 to 20 at % are investigated. The coatings containing over 8 at % B are shown to have amorphous structures. Ni-B and Co-B coatings with boron concentrations preceding the onset of amorphization (6–7.5 at %) possess optimal tribological properties under dry sliding. Coatings with metastable amorphous structure demonstrate the worst tribological behavior. An increase in boron concentration up to 20 at % stabilizes the amorphous structure and improves the wear resistance, microhardness, and thermal stability of the galvanic coatings in question.
It is believed that materials based on ultrafine (nanoscale) diamond powders can possess high-level physical-mechanical and performance parameters characteristic of a nanocrystalline state. In certain cases, however, conventional methods for compacting ultrafine-dispersed diamonds (UDDs) fail and cannot be used to fabricate materials with desired properties. The difficulties associated with the ultrafine-dispersed state of the initial diamond powders can be surmounted by modifying the chemical and phase composition of the UDD surface. The possible use of UDDs as a catalyst that is conductive to the occurrence of chemical and phase transformations in certain substances at high pressures is analyzed. Sintering UDDs in the region of metastability of diamond makes it possible to produce porous polycrystalline aggregates with large specific surface area and very hard transparent particles.