The mechanism of linearity improvement in AlGaN/GaN high-electron mobility transistors (HEMTs) by low pressure chemical vapor deposition (LPCVD)-SiN $_{\textit{x}}$ passivation is verified using an asymmetric passivation structure, based on different two-dimensional electron gas (2DEG) enhancement capability between LPCVD-SiN $_{\textit{x}}$ and SiO $_{\text{2}}$ passivation grown by plasma-enhanced CVD (PECVD). The fabricated AlGaN/GaN HEMTs with a hybrid LPCVD-SiN $_{\textit{x}}$ /PECVD-SiO $_{\text{2}}$ passivation structure deliver a linearity figure of merit third-order intermodulation point (OIP3)/P $_{\text{DC}}$ of 4.36 dB, which is 2.84 dB higher than HEMTs with pure PECVD-SiO $_{\text{2}}$ passivation. Benefiting from the charge and electric field modulation effect of the LPCVD-SIN $_{\textit{x}}$ in the source-gate access region of HEMTs, the current-dependent nonlinear source access resistance is remarkably improved, especially at high current level over 500 mA/mm and high temperature. LPCVD-SIN $_{\textit{x}}$ could be a compelling passivation for the fabrication of high linearity GaN-based power HEMTs.
1 January 2025 in Journal of Vacuum Science & Technology B
High cost of high-purity semi-insulating (HPSI) SiC is a significant barrier to its widespread industrial use as a substrate for RF GaN transistors. This study presents a cost-effective 6 in. SiC-on-SiC (SOS) composite substrate. This novel substrate is created by bonding an HPSI-SiC film onto a more affordable supporting SiC wafer using smart cut and surface activated bonding technologies. This approach not only allows multiple transfers of HPSI-SiC films but also enables the reuse of the supporting substrate, potentially reducing costs by over 60%. The epitaxial AlGaN/GaN heterostructure grown on the SOS substrate exhibited excellent high-resistance properties with minimal RF loss, measuring less than 0.04 dB/mm across frequencies from 30 MHz to 40 GHz. The RF loss characteristics were analyzed using a small signal model, revealing detailed capacitance and resistance behavior. Additionally, an AlGaN/GaN RF device, developed using a 0.12 μm process on the SOS substrate, achieved good electric performance with an output current of 1.3 A/mm and ft/fmax values of 63.3/173.4 GHz. The SOS substrate offers a cost-effective alternative to traditional GaN substrates while maintaining the high standards required for advanced RF electronic devices.
1 April 2026 in Semiconductor Science and Technology
Gallium nitride (GaN) high-electron-mobility transistors are constrained by localized self-heating, which compromises reliability and limits power scaling. While diamond integration offers a superior thermal management solution, minimizing the thermal resistance of the near-junction passivation layers remains a critical challenge. This work demonstrates an effective top-side thermal management strategy by fabricating a GaN/AlN/diamond heterostructure, replacing the conventional low-thermal-conductivity SiN passivation. Enabled by a thin AlN interlayer, this architecture achieves an ultra-low thermal boundary resistance of 6.5 m 2 ·K GW −1 . Consequently, under a high power density of 24 W mm −1 , transient thermal analysis reveals a significant peak junction temperature reduction of ∼30 °C compared to standard SiN-passivated devices. Cross-sectional TEM and energy-dispersive x-ray spectroscopy confirm atomically abrupt interfaces without interdiffusion, validating the structural integrity. These results underscore the efficacy of eliminating the thermal barrier in the near-junction region, establishing a viable pathway for realizing the full potential of diamond-enhanced GaN electronics.