Perovskite solar cells have reached a power conversion efficiency over 25%, and the engineering of the interface between the perovskite and hole transport layer (HTL) has been crucial to achieve high performance. Here we design a bifunctional molecule CBz-PAI with carbazole-triphenylamine and phenylammonium iodide units to passivate defects at the perovskite/HTL interface. Owing to a favourable energy level alignment with the perovskite, the CBz-PAI acts as a hole shuttle between the perovskite layer and the HTL. This minimizes the difference between the quasi-Fermi level splitting of the perovskite, or ‘internal’ Voc, and the external device Voc, thus reducing voltage losses. As a result, solar cells incorporating CBz-PAI reach a stabilized power conversion efficiency of 24.7% and maintain 92.3% of the initial efficiency after 1,000 h under damp heat test (85 °C and 85% relative humidity) and 94.6% after 1,100 h under maximum power point-tracking conditions.
High-quality perovskite light harvesters and robust organic hole extraction layers are essential for achieving high-performing perovskite solar cells (PSCs). We introduce a phosphonic acid–functionalized fullerene derivative in mixed-cation perovskites as a grain boundary modulator to consolidate the crystal structure, which enhances the tolerance of the film against illumination, heat, and moisture. We also developed a redox-active radical polymer, poly(oxoammonium salt), that can effectively p-dope the hole-transporting material by hole injection and that also mitigates lithium ion diffusion. Power conversion efficiencies of 23.5% for 1-square-centimeter mixed–cation-anion PSCs and 21.4% for 17.1-square-centimeter minimodules were achieved. The PSCs retained 95.5% of their initial efficiencies after 3265 hours at maximum power point tracking under continuous 1-sun illumination at 70° ± 5°C.
A multifunctional interface modulator GO/(CsPbBr 3 QD) composite decreases resistive losses of perovskite solar modules by enhanced charge transport and decreased carrier recombination, as well as inhibiting ion/molecule diffusion.
A cross-linker is designed to suppress the notorious light-induced phase segregation and nonradiative losses. The as-fabricated WBG PSCs deliver a certified VOC of 1.37 V, which is among the highest values for WBG PSCs. And it enables 28.3% APTSCs.