A series of complexing adsorbents is prepared by coating silica particles with linear polyhexamethylene guanidinium (PHMG) chloride followed by saturation with a number of sulphonated nitrosonaphthols reagents electrostatically retained by positively charged polymer layer. PHMG coated silica is hydrolytically stable even during treatment with 6 M HCl heated up to 50 °C. The adsorption of 1-nitroso-2-naphthol-3,6-disulfonic acid (nitroso-R-salt), 2-nitroso-1-naphthol-4-sulfonic acid (nitroso-N-salt), and 2-nitroso-1-naphthol-3,6-disulfonic acid (nitroso-K-salt) on PHMG modified silica was studied. The effective immobilisation of sulphonated nitrosonaphthols was achieved in the range of pH of 3 - 8, while the adsorption of the monosulphonated reagent (nitroso-N-salt) is twice as high as the disulphonated analogues (nitroso-R-salt and nitroso-K-salt). The adsorption of Cu(II), Fe(III), Co(II), Ni(II), Al(III), Zn(II), Pb(II), Mn(II), and Cr(III) on prepared complexing adsorbents under static and dynamic conditions was studied as a function of time, pH, sample volume, and presence of interfering ions. Metal ions can be desorbed by using 1 M HCl or 1 M HNO3. The preconcentration factors of metals under optimized conditions are varied from 20 to 80. The developed method was used for the preconcentration of trace metals from natural waters followed by ICP-OES determination. The sub-ppb limits of detection of metals are achieved.
An adsorbent based on silica consecutively modified with poly(hexamethylene guanidine) and nitroso-R-salt is proposed for the adsorption preconcentration and photometric determination of cobalt. The approach gives adsorbents with the controlled surface concentration of the reagent. The adsorbent extracts cobalt(II) from solutions of pH 5–9 with partition coefficients of 5×103–1 × 104 cm3/g. The specific features of the influence of Fe(II) and Fe(III) on the preconcentration and determination of cobalt are considered. The interference with Fe(II) is eliminated by its oxidation to Fe(III). It is shown that the performance characteristics of the procedures depend on the surface concentration of the reagent. The limit of detection for cobalt is 0.01 μg per 0.1 g of the adsorbent. The developed procedures were used for the determination of mobile cobalt species in soils.
The sorbent prepared by sequential treatment of silica gel by polyhexamethylene guanidine of linear structure and nitroso-R salt is suggested for sorption concentration of palladium(II) and cobalt(II) from aqueous solutions.
Functionalized adsorbents with poly-(4,9-dioxododecane-1,12-guanidine) (SiO 2 –PDDG) and mercaptophenyl groups (MPhS) were used for the separation of Se( vi ) and Se( iv ) for the first time.