6 July 2022 in Applied Intelligence
3 June 2022 in Applied Optics
We propose an instantaneous frequency measurement (IFM) scheme featured with unambiguous measurement utilizing a Sagnac loop with an embedded bi-directional phase modulator and an optical filter with a linear frequency response. The frequency of the microwave signal to be measured is instantaneously estimated by calculating an amplitude comparison function (ACF) of photocurrents from the upper and lower branches of the proposed structure. Compared to previous IFM schemes, the ACF in the proposed scheme is monotonic, by which the frequency of the unknown microwave signal can be uniquely confirmed without ambiguity. Only one laser source and a phase modulator are needed, which simplifies the measurement system. In addition, the monotonous ACF can guarantee measurement accuracy in a wide range, from low frequency to high frequency. The IFM system has robustness in optical and RF power shifts. Simulation results show that frequency measurement over the range of 30 GHz with a measurement error of 0.4 GHz is achieved.
16 May 2019 in Journal of Modern Optics
A microwave photonic generation scheme of triangular waveform using cascaded dual-drive Mach-Zehnder modulators (DDMZMs) and FBG is proposed. We show that a frequency-doubled and power-variable triangular waveform can be obtained. The double frequency can reduce the high-frequency requirement of the local oscillation signal (LO) source. The introduction of the second modulator can improve the stability of the scheme. The simulation results show that the power of the triangular is variable; the stability is optimized when the first modulation index is in 0 1; the similarity coefficient is greater than 0.998, which is 0.006 higher than one-stage-modulation scheme. Meanwhile, the similarity coefficient remains over 0.992 when the DC drifting difference value of and is in −90 60 mV, and it remains over 0.99 when the phase difference of the two LO sources varies from −10° to 10°. It verifies the tolerance of DC drifting and phase desynchrony of the system.
19 December 2024 in Optics Express
We propose a conformal vision transformer (CViT)-based demodulation for the perfect optical vortices shift keying (POV-SK) signal in the low-density parity check (LDPC) coded free-space optical (FSO) link. Despite the growing interest in POV for FSO links, atmospheric turbulence (AT) induces phase distortions, resulting in POV-SK demodulation errors and degrading POV-SK FSO communication performance. The CViT demodulator utilizes conformal mapping to reshape the circular POV-SK patterns into rectangles, enabling more efficient feature learning. Paired with ViT’s comprehensive global feature extraction capabilities, the CViT demodulator effectively counters turbulence and boosts accuracy in identifying the POV-SK modes. In this study, the CViT POV-SK demodulation method is thoroughly described. The extensive numerical simulations compare CViT, ViT, Conformal ResNet18, and the lightweight RCDT-based ’shallow’ CNN in terms of recognition accuracy, PSNR, and bit error rate (BER). Under severe turbulence (C
n
2=4.4×10−12m−2/3), conformal mapping can improve the recognition accuracy of ViT from 0.7636 to 0.8437 (CViT), while reducing the BER from 3.6 × 10−2 to 1.1 × 10−3. Under the premise of keeping recognition accuracy and BER the same, CViT significantly reduces the number of model parameters and time consumption compared to Conformal ResNet18, which is essential for meeting the system’s future real-time demands. In addition, in moderate turbulence, the performance of the RCDT-based CNN is acceptable, but it significantly lags behind CViT in severe turbulence, with the BER being an order of magnitude higher than that of CViT.
9 December 2019 in Journal of Modern Optics
An all-optical image rejection (IR) mixer, based on a dual electrical port phase modulation (PM) in a Sagnac loop and a wavelength division multiplexer (WDM), is proposed. The radio frequency (RF) and the local oscillator signals are loaded onto the two electrical ports of the PM, respectively. The two down-conversion channels are obtained with the use of WDM. A pair of phase orthogonal down-converted intermediate frequency (IF) signals are obtained by properly adjusting polarization controller. Then an electrical low-frequency 90 hybrid coupler (90 HC) combines the two IF signals to double the desired IF signal and suppress the image interference IF signal. In the simulation, a 30-GHz RF signal is successfully down-converted to 1 GHz with about 57 dB IR. Compared with the IR mixer based on two parallel PMs, conversion efficiency is improved about 6 dB.