Iron oxides are widely used as catalysts for photo-Fenton-like processes for dye oxidation. In this study, we report on the synthesis of an α/γ-Fe2O3 mixed-phase catalyst with magnetic properties for efficient separation. The catalyst was synthesized using glycine–nitrate precursors. The synthesized α/γ-Fe2O3 samples were characterized using scanning electron microscopy, X-ray diffraction spectroscopy (XRD), Raman shift spectroscopy, X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometer (VSM). The diffraction peaks were indexed with two phases, α-Fe2O3 as the main phase (79.6 wt.%) and γ-Fe2O3 as the secondary phase (20.4 wt.%), determined using the Rietveld refinement method. The presence of Fe2+ was attributed to oxygen vacancies. The mixed-phase α/γ-Fe2O3 catalyst exhibited remarkable photo-Fenton-like degradation performance for Rhodamine B (RhB) in neutral pH. The effects of operating parameters, including H2O2 concentration, catalyst concentration, and RhB concentration, on the degradation efficiency were investigated. The removal rates of color were 99.2% after 12 min at optimal conditions of photo-Fenton-like oxidation of RhB. The sample exhibited a high saturation magnetization of 28.6 emu/g. Additionally, the α/γ-Fe2O3 mixed-phase catalyst showed long-term stability during recycle experiments, with only a 5% decrease in activity.
The creation of multi-stimuli-sensitive composite polymer–inorganic materials is a practical scientific task. The combination of photoactive magneto-piezoelectric nanomaterials and ferroelectric polymers offers new properties that can help solve environmental and energy problems. Using the doctor blade casting method with the thermally induced phase separation (TIPS) technique, we synthesized a hybrid polymer–inorganic nanocomposite porous membrane based on polyvinylidene fluoride (PVDF) and bismuth ferrite (BiFeO3/BFO). We studied the samples using transmission and scanning electron microscopy (TEM/SEM), infrared Fourier spectroscopy (FTIR), total transmission and diffuse reflection, fluorescence microscopy, photoluminescence (PL), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), vibrating-sample magnetometer (VSM), and piezopotential measurements. Our results demonstrate that the addition of BFO increases the proportion of the polar phase from 76.2% to 93.8% due to surface ion–dipole interaction. We also found that the sample exhibits laser-induced fluorescence, with maxima at 475 and 665 nm depending on the presence of nanoparticles in the polymer matrix. Furthermore, our piezo-photocatalytic experiments showed that under the combined actions of ultrasonic treatment and UV–visible light irradiation, the reaction rate increased by factors of 68, 13, 4.2, and 1.6 compared to sonolysis, photolysis, piezocatalysis, and photocatalysis, respectively. This behavior is explained by the piezoelectric potential and the narrowing of the band gap of the composite due to the mechanical stress caused by ultrasound.
The results of studying the structure and electrical resistance of nanostructured YBa2Cu3O7–δ-based superconducting ceramics of various density optimally saturated by oxygen and fabricated from...
23 October 2015 in International Journal of Thermophysics
The structure, morphology, density, and resistivity of nanostructured superconducting YBCO-based ceramics, fabricated from nanopowders prepared by burning nitrate-organic precursors, have...
24 May 2022 in Journal of Physics and Chemistry of Solids