1 April 2016 in Applied Energy
1 September 2020 in Energy Conversion and Management
19 January 2018 in Protection and Control of Modern Power Systems
Growing penetration of wind power challenges to power system security, since the conventional generators may not have sufficient capacity to compensate wind power fluctuation plus the reverse peak regulation. In this paper, the high-capacity pumped-storage and fast-response battery-storage are coordinated to compensate the variation of both wind power and load, aiming at shifting peak load, responding to wind power ramping, reducing the curtailment of wind and stabilizing the output of thermal units. A practical framework is designed for optimizing the operation of the hybrid system consisting of the wind, pumped-storage, and battery storage, which can take full advantages of pumped-storage and battery-storage. The detailed mathematical formulations of the pumped-storage and battery-storage are built. Three cases are studied to demonstrate the advantages of the proposed coordination method.
3 September 2021 in IEEE Transactions on Neural Networks and Learning Systems
Mid-term load forecasting (MTLF) is of great significance for power system planning, operation, and power trading. However, the mid-term electrical load is affected by the coupling of multiple factors and demonstrates complex characteristics, which leads to low prediction accuracy in MTLF. Furthermore, MTLF is faced with the ``curse of dimensionality'' problem due to a large number of variables. This article proposes an MTLF method based on manifold learning, which can extract the underlying factors of load variations to help improve the accuracy of MTLF and significantly reduce the calculation. Unlike linear dimensionality reduction methods, manifold learning has better nonlinear feature extraction ability and is more suitable for load data with nonlinear characteristics. Furthermore, long short-term memory (LSTM) neural networks are used to establish forecasting models in the low-dimensional space obtained by manifold learning. The proposed MTLF method is tested on independent system operator (ISO) New England datasets, and load forecasting in 24, 168, and 720 h ahead is carried out. The numerical results validate that the proposed method has higher prediction accuracy than many mature methods in the mid-term time scale.
4 October 2019 in IET Generation, Transmission & Distribution
A novel combined probabilistic forecasting method based on an improved Markov chain for photovoltaics (PVs) to enhance the accuracy of probabilistic PV power forecasting is presented. First, a Markov chain (MC) forecasting structure combining precise factors is proposed that considers more influence factors beyond the statistical information of historical data as compared with conventional MCs. Rough set theory is then used to refine the major factors to quantify the influence of those factors. Furthermore, a k‐nearest neighbours algorithm is used to select similar samples for building an accurate forecasting model. Based on similar samples, the changing PV trends are more obvious than when using whole historical samples, thus further improving forecasting accuracy. Finally, the effectiveness and superiority of the proposed method are verified by comparing results from simulations with the results from competing methods for two cases using datasets from DESERT KNOWLEDGE AUSTRALIA Solar Centre and GEFCom2014. The simulation results show that the proposed method can provide probabilistic forecasting results with better performance, also, the proposed method can be adapted to various forecasting scenarios.
4 August 2021 in IEEE Transactions on Power Systems
Exploiting flexibilities (e.g., demand response, energy storage, and deep peak regulation.) in generation expansion planning (GEP) is significant for coping with the increase of renewable energy (RE). This letter presents a GEP model with novel consideration of the flexibility of the interconnected external network without data leakage. External flexibility (detailed information) is represented as a feasible region with generation cost functions related to tie-line power, by using multi-parametric programming. Numerical results demonstrate the effectiveness of the proposed model.