28 October 2025 in IEEE Transactions on Circuits and Systems I: Regular Papers
A pseudo-random ternary sequence (PRTS) generator is essential for high-speed serial interfaces, as three-level pulse amplitude modulation (PAM-3) is increasingly adopted in recent standards such as USB4. To support high data rates, PRTS generation usually requires a high degree of parallelization. However, increased parallelism introduces critical hardware challenges, motivating the need for optimal hardware design. This paper introduces a novel design methodology that applies recursive and reverse recursive substitution to optimize the transition matrix along with simplified modulo-3 operators, thereby reducing computational overhead and improving hardware efficiency. The proposed design supports generating multiple sequence lengths by sharing hardware, allowing a single generator to handle different patterns with minimal overhead. In addition, PRTS checker functionality is embedded within the generator, enabling compact and fully integrated BIST capabilities. Fabricated in a 28-nm FDSOI process, the design provides up to 166.2 Gbps bandwidth with a power consumption of 6.16 mW, while only occupying 0.006 mm2. This work provides a scalable and efficient solution for PRTS generation in high-speed interfaces utilizing PAM3.
17 December 2025 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
High-bandwidth memory (HBM) has enabled substantial advancements in bandwidth-intensive applications, including large-scale artificial intelligence models. HBM is typically integrated with other systems-on-chip (SoCs) through a silicon interposer, and the primary bottleneck in aggressively scaling the bandwidth in next-generation HBM systems stems from significant crosstalk caused by closely spaced, high-density parallel interconnects in the interposer. While crosstalk avoidance code (CAC) has emerged as a promising solution, prior CAC schemes suffer from low bit efficiency and considerable hardware overhead. This article proposes an efficient CAC scheme, WITCH, which employs a novel weighted coding strategy. Unlike prior approaches that consider all channels identically, WITCH assigns different weights to channels based on their relative positions in the array, enabling more bit-efficient crosstalk suppression. We also present WITCH with additional shielding (WITCH-AS), an extension of WITCH that incorporates additional shielding to further reduce crosstalk levels. Our coding schemes achieve high bit efficiency, up to 17.3% higher than state-of-the-art techniques while providing an identical level of crosstalk reduction. Simulation results using an industry-proven channel model demonstrate that WITCH and WITCH-AS improve eye height by 10.1%–49.4% and 17.1%–51.1%, respectively. Furthermore, we propose an area- and energy-efficient hardware implementation that can be integrated into real-world HBM systems. The design reduces area and critical path delay by 31.0% and 28.2%, respectively, compared with conventional designs. Finally, we propose a compatible simultaneous switching output (SSO) noise mitigation technique that can be seamlessly integrated into WITCH to further enhance signal integrity under high-speed, high-density operating conditions.