Rare earth-activated 1-D photonic crystals were fabricated by RF-sputtering technique. The cavity is constituted by an Er3+-doped SiO2 active layer inserted between two Bragg reflectors consisting of ten pairs of SiO2/TiO2 layers. Scanning electron microscopy is employed to put in evidence the quality of the sample, the homogeneities of the layers thickness and the good adhesion among them. Near infrared transmittance and variable angle reflectance spectra confirm the presence of a stop band from 1500 nm to 2000 nm with a cavity resonance centered at 1749 nm at 0° and a quality factor of 890. The influence of the cavity on the 4I13/2 → 4I15/2 emission band of Er3+ ion is also demonstrated.
The study of the differences between ordered and disordered materials (in the hundreds of nanometer length- scale) is a central topic for a better understanding of light transport phenomena in photonic media. In this work we report on an experimental and theoretical study of light transmission in disordered one dimensional photonic structures, where the disorder is introduced by a random variation of layer thicknesses. We found that the ran- dom photonic structure exhibits a dramatic decrease of the overall light transmission in the range 350–1200 nm with respect to the corresponding periodic photonic crystal. This study envisages the use of disordered one dimensional photonic structures for the realization of broad band filters for many applications, from sensing to photo- and thermo-voltaics
6 August 2011 in Journal of Sol-Gel Science and Technology
We report on the realization and characterization of a high performance, compact magnetometer based on a magnetoresistive sensor and working in the range . The output is provided both numerically and by means of a field-proportional voltage. Spurious offset effects are suppressed by flipping the film magnetization at a frequency of , orders of magnitude higher than in conventional applications. The design allows for a field resolution of , low output noise density, and high precision and accuracy (relative full-scale uncertainty of about ).
The sol–gel technique is a very flexible, relatively simple, and low-cost method to fabricate many different innovative photonic structures characterized by specific functionalities. During synthesis, starting from the molecular level, compounds or composites with well controlled composition can be obtained as thin films, powders or monoliths. These materials can be used to prepare such structures as waveguides, photonic crystals, coatings, and bulk glasses including spheres, rings and other geometries exploited in optical resonators fabrication. This article presents some results obtained by the authors in the field of the sol–gel-derived photonic structures. To emphasise the scientific and technological interest in this kind of systems and the versatility of the sol–gel route, the glass-based nano and micrometer scale range systems are discussed. Particularly, the following systems are described: silica–hafnia glass and glass–ceramic planar waveguides, nanosized tetraphosphates, and silica colloidal crystals. The attention is focused on the spectroscopic properties of \(\hbox {Er}^{3+}\)-activated materials that due to the light emission can be used in the integrated optics area covering application in sensing, biomedical diagnostic, energy conversion, telecommunication, lighting, and photon management.