Non-planar sun sensors can determine solar orientation by existing photodiodes or by reusing solar panels, without increasing the size and mass of spacecraft. However, a limiting factor for the improvement of the accuracy of orientation lies in the lack of a detailed performance assessment on interference suppression. In this paper, a new method that determines solar orientation in the frequency domain is developed for regular pyramid sun sensors, which are formed by regular pyramid arrays. Furthermore, two formulations are established to evaluate the errors of the solar azimuth and elevation angle in solar orientation determination based on the newly proposed frequency-domain method. With these formulations of performance evaluation, we discover the mathematical relationship between the interference spectrum, array geometry, solar irradiance, solar azimuth or elevation angle, and the error in solar orientation determination for the first time. This reveals that the internal interference from the detection system can be completely suppressed in solar orientation determination, and the constant interference can be eliminated in the estimation of solar azimuth angle. Simulation and field experiments validated the effectiveness of the new orientation method, error formulations and performance of each interference source.
22 December 2021 in IEEE Transactions on Electromagnetic Compatibility
In this article, the influence of balun on the lighting electromagnetic coupling effects of planar dipole working at 890–954 MHz is investigated. The planar dipole is placed near the lightning channel. Based on the electromagnetic model of the lightning return stroke, the following two aspects are researched: first, the influence of the position of balun-cable to the lightning coupling effects, including the influence of the first return stroke and subsequent return stroke to the coupling effects of the planar dipole. Second, the influence of the distance between balun and coaxial cable to coupling effects of antenna. It can be found that the position of the balun-cable has great impacts on the lightning coupling effects of the planar dipole, even exceeding the impacts caused by the polarization of the antenna, which is installed on the communication tower and located near the lightning channel. Meanwhile, although the energy of the first return stroke is much greater than that of the subsequent return stroke, the energy of the subsequent return stroke coupling into the planar dipole is greater than that of the first return stroke. It is also found that the coupling effect of the antenna is approximately proportional to thedistance between the balun and the coaxial cable at the same height above the ground.
Non-planar sensor arrays are used to determine solar orientation based on the orientation matrix formed by orientation vectors of the sensor planes. Solar panels or existing photodiodes can be directly used without increasing the size or mass of the spacecraft. However, a limiting factor for the improvement of the accuracy of orientation lies with the lack of an assessment-based approach. A formulation was developed for the supremum (i.e., the least upper bound) of orientation error of an arbitrary orientation matrix in terms of its influencing factors. The new formulation offers a way to evaluate the supremum of orientation error considering interference with finite energy and interference with infinite energy but finite average energy. For a given non-planar sensor array, a sub-matrix of the full orientation matrix would reach the optimal accuracy of orientation if its supremum of orientation error is the least. Principles for designing an optimal sensor array relate to the configuration of the orientation matrix, which can be pre-determined for a given number of sensors. Simulations and field experiment tested and validated the methods, showing that our sensor array optimization method outperforms the existing methods, while providing a way of assessment and optimization.