22 February 2023 in Energy & Environmental Science
This review presents the state-of-the-art MEAs, including key components and the preparation technologies. Especially, the overall design strategies of MEAs are discussed to promote high-performance alkaline water electrolysis.
3 March 2022 in Energy & Environmental Science
The generation of hydrogen via alkaline electrolyzers is a promising approach for addressing the severe energy crisis. However, alkaline electrolyzers with alkaline electrolytes or pure water suffer from poor performance compared to proton exchange membrane (PEM) electrolyzers. Here, in order to improve the energy conversion efficiency and durability, especially at high current density, a novel three-dimensionally (3D)-ordered membrane electrode assembly (MEA) based on highly porous catalyst layers (CLs) with unique vertical channels, an ultrathin membrane layer (ML) and 3D CL/ML interface structures was nanoengineered for alkaline electrolyzers. Benefiting from the mass-transfer highways constructed by the overall design of the 3D-ordered MEA, a high current density of 4200 mA cm−2 was achieved at 2.0 V in 1 M KOH, which is superior compared with the other best-performing alkaline electrolyzers. Moreover, alkaline electrolyzers fed with pure water achieved a performance of 3100 mA cm−2 at 2.0 V. Notably, the pure-water-fed alkaline electrolyzers can maintain over 600 h at a high current density of 1 A cm−2. By revealing the relationship between the MEA structure and mass transfer, our work opens a simple, cost-effective, and scalable route to prepare 3D-ordered MEAs for alkaline electrolyzers.
16 December 2024 in Angewandte Chemie International Edition
10 April 2024 in Energy & Environmental Science
High-performance membrane electrode assemblies (MEAs) have significant importance for developing anion exchange membrane (AEM) water electrolysis, however, the fabrication of nanostructured MEAs to increase catalyst utilization, maximize three-phase boundaries, enhance mass transport and improve electrolysis stability remains a fundamental challenge. Here, we propose a swelling-assisted transfer strategy to construct ordered anodic catalyst layers (ACLs) on an AEM. Concretely, utilizing a three-dimensionally interlocked ACL/AEM interface formed using a direct membrane deposition method, the ordered ACLs can be perfectly transferred to AEMs at atmospheric pressure and low temperature, thus enabling MEAs with vertically oriented through-hole ACL structures and an aligned ionomer layer for OH− transfer. Using the prepared MEA in AEM water electrolyzers, we obtain a current density of 3.61 A cm−2 at 2.0 V under pure-water-fed conditions, and stable operation for 700 h at a current density of 1.0 A cm−2 at ∼1.7 V. This work provides a universal approach to construct next-generation MEAs for membrane-based electrochemical devices.
22 September 2021 in Journal of Materials Chemistry A
The poor interfacial contact between an ion-conducting membrane and electrodes and the resulting sluggish mass transport have been long recognized as the hurdles for the further development of electrochemical conversion devices, especially for hydrogen energy conversion technologies such as anion exchange membrane fuel cell (AEMFC) and anion exchange membrane water electrolysis (AEMWE) technologies. Thus, mass transfer intensification at the interface between a membrane and catalyst (solid–solid interface) is one of the most essential requirements for boosting the performance of the aforementioned technologies. Here we fabricated an extremely high water uptake anion exchange membrane (HWU-AEM) with a huge swelling behavior in the through-plane direction (485.3% of original thickness), whereas that in the in-plane direction shows negligible swelling (7.8%). The anisotropic swelling behavior not only facilitates the AEM to adaptively fill the micro-gaps between the membrane and catalyst layer thereby greatly alleviating the sluggish interfacial mass transfer, but also simultaneously enables a dimensional stability of the prepared AEM. In addition, the extremely high water uptake of AEM enables an efficient water-management at the catalyst surface. Due to this design, besides an outstanding hydroxide conductivity and chemical and mechanical stability, an excellent performance of 0.911 A cm−2 at 1.9 V of AEMWE at room temperature shows preponderance in hydrogen production applications. Meanwhile, a preeminent peak power density of 1.1 W cm−2 at 80 °C is achieved when assembled in a H2/O2 fuel cell with a HWU-AEM. The HWU-AEM may provide new design principles for fuel cell, water electrolysis and other electrochemical devices, which generally suffer from sluggish heterogeneous interfacial mass transport.
18 July 2023 in Energy & Environmental Science
Water dissociation (WD) with bipolar membranes (BMs) is becoming the most effective solution for optimizing pH or ionic species incompatibility of anolyte/catholyte in electrochemical devices. However, available BMs always suffer from sluggish WD kinetics and structural delamination, thus hardly satisfying the needs of emerging energy/mass conversion devices. Based on numerical simulations, we propose here a stepwise strategy to construct a BM with a stable C–C covalent interlocking interlayer (CIBM) to solve the dilemma, through which physical binding strength and ionic transportation rate are exponentially enhanced. Due to this covalent design, an unprecedented WD performance at high current (1.17 V at 1000 mA cm−2) and the longest stability (1100 hours) can be achieved. The introduction of covalent interfaces also successfully realized a continuous BM NH3 electrosynthesis with high efficiency, low energy consumption and state-of-the-art yield (70.9 mg cm−2 h−1) from 2000 ppm NO3 −, providing innovative design principles for emerging ampere-level BM electrochemical devices.