18 January 2021 in IEEE Transactions on Power Electronics
With the increasing use of rechargeable lithium-ion battery packs in numerous applications, it calls for an effective evaluation of active battery cell equalization to enhance the whole battery pack's capacity and performance. Plenty of work has focused on cell equalizing circuit and control algorithm design. Still, none of them is devoted to a comprehensive analysis and comparison of cell balancing methods from the topology level. In this article, a review of the state-of-the-art active battery cell equalization methods is conducted, where it is classified as adjacent-based, nonadjacent-based, direct cell-cell, and mixed topologies. This classification can provide a comprehensive way to analyze and compare the existing active cell balancing methods' performance. Subsequently, the mathematical models of these balancing structures are developed, and extensive simulation results are provided to compare the performance of these equalization topologies in terms of equalization speed. It then comes up with an inclusive economic comparison between them, followed by a discussion.
13 October 2020 in IEEE Transactions on Industrial Electronics
Effective fast charging is of great importance in the application of lithium-ion battery packs. In this work, a combined battery pack charging system is constructed by integrating the charger and cell-to-cell equalizers, which can excellently solve the cell imbalance problem in the battery pack. Based on this charging system, a fast charging control method is proposed to coordinate and optimize the current provided by the charger and the equalizing currents by formulating a constrained optimization problem with consideration of the battery pack's charging time, energy loss, and charging constraints. Next, a two-layer optimization strategy is designed to solve it, where a binary-search-based charging time region contraction method is adopted to determine the minimum expected charging time in the top layer, while the bottom layer utilizes the barrier method to search for the corresponding optimal charging and equalizing currents with the charging time given by the top layer. At last, extensive simulation and hardware-in-the-loop experimental results demonstrate the superior performance of the designed optimal fast battery pack charging control strategy.