1 December 2014 in Physics of Fluids
Bubbles at a free surface usually burst in ejecting myriads of droplets. Focusing on the bubble bursting jet, prelude for these aerosols, we propose a simple scaling for the jet velocity and we unravel experimentally the intricate roles of bubble shape, capillary waves, gravity, and liquid properties. We demonstrate that droplets ejection unexpectedly changes with liquid properties. In particular, using damping action of viscosity, self-similar collapse can be sheltered from capillary ripples and continue closer to the singular limit, therefore producing faster and smaller droplets. These results pave the road to the control of the bursting bubble aerosols.
13 September 2016 in Physical Review Fluids
As a bubble bursts at a liquid-air interface, a tiny liquid jet rises and can release the so-called jet drops. In this paper the size of the top jet drop produced by a bubble bursting is investigated experimentally. We determine and discuss the first scaling law enabling the determination of the top jet drop size as a function of the corresponding mother bubble radius and the liquid properties (viscosity, surface tension, and density), along with its regime of existence. Furthermore, with the aim of decoupling experimentally the effects of bubble collapse and jet dynamics on the drop detachment, we propose a scaling providing the top drop size only as a function of the jet velocity and liquid parameters. In particular, this allows us to untangle the intricate roles of viscosity, gravity, and surface tension in the end pinching of the bubble bursting jet.
12 July 2019 in Journal of Fluid Mechanics
This paper is dedicated to the solidification of a water drop impacting a cold solid surface. In the first part, we establish a one-dimensional (1-D) solidification model, derived from the Stefan problem, that aims at predicting the freezing dynamics of a liquid on a cold substrate, taking into account the thermal properties of this substrate. This model is then experimentally validated through a 1-D solidification set-up, using different liquids and substrates. In the second part, we show that during the actual drop spreading, a thin layer of ice develops between the water and the substrate and pins the contact line at its edge when the drop reaches its maximal diameter. The liquid film then remains still on the ice and keeps freezing. This configuration lasts until the contact line eventually unpins and the liquid film retracts on the ice. We measure and interpret this crucial time of freezing during which the main ice layer is built. Finally, we compare our 1-D model prediction to the thickness of this ice pancake and we find a very good agreement. This allows us to provide a general expression for the frozen drop’s main thickness, using the drop’s impact and liquid parameters.
29 April 2016 in Scientific Reports
In a single glass of champagne about a million bubbles nucleate on the wall and rise towards the surface. When these bubbles reach the surface and rupture, they project a multitude of tiny droplets in the form of a particular aerosol holding a concentrate of wine aromas. Based on the model experiment of a single bubble bursting in idealized champagnes, the key features of the champagne aerosol are identified. In particular, we show that film drops, critical in sea spray for example, are here nonexistent. We then demonstrate that compared to a still wine, champagne fizz drastically enhances the transfer of liquid into the atmosphere. There, conditions on bubble radius and wine viscosity that optimize aerosol evaporation are provided. These results pave the way towards the fine tuning of flavor release during sparkling wine tasting, a major issue for the sparkling wine industry.
1 April 2011 in Physics of Fluids
We study buoyant displacement flows with two miscible fluids of equal viscosity in ducts that are inclined at angles close to horizontal (β≈90°). As the imposed velocity (V̂0) is increased from zero, we change from an exchange flow dominated regime to a regime in which the front velocity (V̂f) increases linearly with V̂0. During this transition, we observed an interesting phenomenon in which the layer of displaced fluid remained at the top of the pipe (diameter D̂) during the entire duration of the experiment, apparently stationary for times t̂≳103D̂/V̂0 (the stationary residual layer). Our investigation revealed that this flow marks the transition between flows with a back flow, counter to the imposed flow, and those that displace instantaneously. The same phenomena are observed in pipes (experiments) and in plane channels (two-dimensional numerical computations). A lubrication/thin-film model of the flows also shows the transition from back flow to instantaneous displacement. At long times, this model has a stationary residual layer solution of the type observed, which is found at a unique ratio χ of the axial viscous velocity to the imposed velocity. The prediction of the stationary residual layer from the lubrication model is compared with the transition in observed behavior in our pipe flow experiments and our 2D numerical displacements in the channel. Reasonable agreement is found for the pipe and excellent agreement for the channel. Physically, in either geometry at transition, the upper layer of the fluid is in a countercurrent motion with zero net volumetric flux; the velocity at the interface is positive, but the velocity of the interface is zero. This results from a delicate balance between buoyancy forces against the mean flow and viscous forces in the direction of the mean flow.
6 January 2017 in The European Physical Journal Special Topics