Arif Senol Sener

Arif Senol Sener

Auto-generated profile, based on publicly available information

Arif Senol Sener

Department of Mechanical Engineering, Engineering and Architecture Faculty, Nisantasi University, Istanbul, Turkey

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022 in Journal of Nanomaterials
Verified
Journal Article
Open access
PDF file
SRSurakasi Raviteja
Surakasi Raviteja
MKMohd Yunus Khan
Mohd Yunus Khan
ASArif Senol Sener
Arif Senol Sener
TCTushar Choudhary
Tushar Choudhary
CBCE Dr Sumanta bhattacharya
CE Dr Sumanta bhattacharya
VCVelivela Lakshmikanth Chowdary
Velivela Lakshmikanth Chowdary
The production of biodiesel as an alternative fuel and its use as a mixture and other additives are presented. In the present research work, additive blends with diesel biodiesel from algae oil are physically characterised and an analysis of pollutant emissions is carried out when used in an ignition engine by compression. The measurement of pollutant emissions is carried out through a combined emission analyzer adapted to a system of valves attached to the experimental facility. The properties of each mixture with the polluting emissions are compared with that of the reference diesel. It was found that each of the properties improves compared to that of diesel, reducing most emissions in the use of mixtures with biodiesel.

1 January 2022 in Journal of Nanomaterials
Verified
Journal Article
Open access
PDF file
GVGayatri Vaidya
Gayatri Vaidya
PPPravin P. Patil
Pravin P. Patil
ASArif Senol Sener
Arif Senol Sener
NRNavale Sainath Ramnath
Navale Sainath Ramnath
BSBharat Singh
Bharat Singh
TATsegaye Alemayehu Atiso
Tsegaye Alemayehu Atiso
Numerous Algae oils with low and medium viscosity were investigated as fuel for CI engines. However, high viscous algae oil has not been explored in detail as a replacement for diesel in CI engines due to operational problems and poor performance characteristics. Esterification of neat algae oil to obtain its biodiesel is a complex process. The biodiesel obtained also has viscosity nearly five times more than diesel viscosity. Hence, research efforts on CI engines using algae oil methyl ester are lacking, particularly in combustion characteristics. This work focuses on utilizing algae oil as a fuel in CI engines. Algae oil has more affinity for alcohols due to a higher percentage of ricinoleic acid which aids in forming a homogeneous mixture. Alcohols with better fuel properties improve the combustion capability of algae oils with low and medium viscosity. However, not much research has been carried out in alcohols with very high viscous algae oil. Hence, in this work, higher and lower‐order alcohols were blended with algae oil in their neat form and their biodiesel with Al2O3 nanoadditives for performance improvement.

9 June 2021 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Verified
Journal Article
Closed access
PDF file
AŞArif Şenol Şener
Arif Şenol Şener
Ibrahim Furkan InceIbrahim Furkan Ince
Ibrahim Furkan Ince
HBHusnu Baris Baydargil
Husnu Baris Baydargil
IGIlhan Garip
Ilhan Garip
OOOktay Ozturk
Oktay Ozturk
The recognition of incorrect fastening of seat belts is significant in passenger and driver safety for the automotive industry and public health. It should be made sure that the passenger’s seat belt is not only fastened but also correctly fastened across the body so that the passenger is adequately protected in the event of an accident. Current technology employs the buckle effect sensor, which merely solves the buckling detection problem, but there is no reliable solution for the correct positioning of the seat belt. Additionally, computer vision-based systems are still incapable of recognizing the incorrect positioning of seat belts when the training is performed by employing the subjects out of the fleet. Considering this fact, in this study, we propose a novel solution that employs a vision-based incorrect fastening seat belt detector to perform automatic vertical height adjustment independent from drivers and passengers for the fleet vehicles. We recognize the incorrect positioning of the seat belt inside the car by the acceptable distance of the seat belt from the neck of drivers or passengers to avoid neck injuries and the deaths caused by neck cuts. An extensive benchmarking is performed by comparing the three CNN architectures such as; DenseNet121, GoogLeNet (Inception-v3), ResNet50 with respect to sensitivity, specificity, precision, false-positive rate, false-negative rate, F1 score, and accuracy. Additionally, training and validation loss curves and accuracy curves are plotted for all the models. Later, the three models are evaluated with a precision-recall (PR) curve at the end. According to the results, the DenseNet121 achieved the highest classification accuracy among the tested models with 99.95%. This paper includes information about the proposed system elements, registration of data, elaboration of data, program algorithm, testing the system in the lab, and on the vehicle.

7 January 2022 in Journal of Nanomaterials
Verified
Journal Article
Open access
PDF file
APArunprasad prasad
Arunprasad prasad
ASArif Senol Sener
Arif Senol Sener
RTR. Thirugnanasambantham
R. Thirugnanasambantham
TET. Elango
T. Elango
TBT. Bothichandar
T. Bothichandar
Nanoparticles are an emerging concept for increasing fuel properties. The purpose of this research work is to determine the effect of magnesium oxide nanoparticles on the performance and emission characteristics of diesel engines that run on a spirulina microalgae biodiesel blend (B20) as a fuel. The ultrasonication was used to disperse MgO nanoparticles in B20 fuel at various concentrations (25, 50, 75, and 100 ppm). The significant findings indicated that B20+100 blends reduced specific fuel consumption by 20.1% and had a 5.09% higher brake thermal efficiency than B20. B20+100 blends reduced CO, hydrocarbon, and smoke emissions by a maximum of 32.02%, 30.03%, and 26.07%, respectively, compared to B20.

24 March 2019 in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
Verified
Journal Article
Open access
PDF file
AAAhmet Aktaş
Ahmet Aktaş
YKYagmur Kircicek
Yagmur Kircicek
AŞArif Şenol Şener
Arif Şenol Şener
Rüzgâr ve deniz yüksek enerji potansiyeline sahip yenilenebilir bir enerji kaynağıdır. Deniz/okyanuslar rüzgâr, dalga, gelgit, akış gibi birden fazla enerji türüne sahiptir. Bu çalışmanın amacı birden çok enerji kaynağını elektriğe dönüştürecek bir sistem tasarlamaktır. Rüzgâr ve deniz akıntı enerjisinden yararlanan, yüksek potansiyelli hibrit güç üretim sistemi modeline sahip bir platform oluşturulmuştur. Fakat bu yenilenebilir enerji kaynaklarının çıkış karakteristiği doğa koşullarına bağlı olduğundan kesintili ve kararsız enerji üretimi gerçekleştirmektedir. Bu kaynakların kararsız çıkış gücünü düzenlemek için hibrit enerji depolama birimi eklenmiştir. Hibrit güç üretim sistemine, batarya ve ultrakapasitörden oluşan hibrit bir enerji depolama ünitesi eklenerek yük tarafına kaliteli ve sürekli enerji ihtiyacı sağlanmaktadır. Ayrıca hibrit enerji depolama biriminde bulunan ultrakapasitör gurubunun ani yük durumlarında sistemde bulunan bataryaya destek olarak derin deşarj olmasını ve gerilim çökmesini engellediği simülasyon çalışmalarıyla gösterilmektedir. Bu çalışmada hibrit enerji üretim sistemi ve hibrit enerji depolama sistemi MATLAB/Simulink programı kullanılarak tüm birimleri simüle edilmektedir. Sisteme özgün yazılan akıllı enerji yönetim algoritması, DA/DA dönüştürücünün ve evirici devrelerinin kontrolünü sağlayarak, tüm güç parametrelerini sürekli hesaplamaktadır. Bu makalede, talep edilen yükün hibrit güç üretim sistemi tarafından üretilen enerjiden yüksek olduğu çalışma durumu incelenerek akım, gerilim ve güç grafik sonuçları detaylı olarak incelenmiştir. Bu inceleme sonucunda ultrakapasitörün ani yük durumunda bataryanın derin deşarj olmasını önleyecek sürede devreye girdiği tespit edilmiştir.

16 December 2025 in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
Verified
Journal Article
Closed access
AŞArif Şenol Şener
Arif Şenol Şener
Bir bisikletin gövdesi, bisikletin temel yapısal elemanıdır ve diğer tüm bileşenlerin bu gövdeye monte edilmesiyle oluşur. Gövde, bisikletin çerçevesi olarak da adlandırılır ve bisikletin sağlamlığını, dayanıklılığını ve sürüş konforunu belirler. Bisiklet gövdesinin tasarımı, bisikletin kullanım amacına ve sürüş konforuna göre değişebilir. Bu makalede bisiklet gövdesine Al 2024, çelik 1020 ve yapısal çelik tanımlanarak 2250 N yükleme koşullarında önce statik analiz, sonrasında ise sırasıyla modal analiz ve harmonik analizler uygulanmıştır. Gerilme değerlerine göre harmonik analiz verileri incelendiğinde titreşim özellikleri incelenen bisiklet gövdesi analizi sonucunda doğal frekanslara göre en yüksek genlik Al 2024 için 0.34 mm olarak elde edilmiştir. Statik analiz sonucunda her üç malzeme için elde edilen bisiklet gövdesi gerilmelerin birbirine yakınlığı tespit edilmiş olup, bu analiz sonucunda elde edilen maksimum gerilmelere göre emniyet katsayıları hesaplandığında çelik 1020’nin 5.38 ile en yüksek değeri sunduğu görülmüştür. Modal analiz sonucunda hesaplanan doğal frekanslar değerlendirildiğinde ise elde edilen sonuçların her üç malzeme için birbirine yakın olduğu ve al 2024’ün 363,5 Hz ile en yüksek frekansı sunduğu görülmüştür. Bisiklet gövdesi için ağırlık kıyası yapıldığında ise Al 2024’ün 1.5 kg değerindeki kütlesi ile diğer iki alaşıma nazaran daha hafif olduğu görülmüştür.