29 April 2020 in Advanced Engineering Materials
The spread of integrated structural elements and parts made from low density materials (for example aluminum and polymers) created a need for joining technologies with which these can be joined. In this article, the most important surface preparation methods and joining processes, with which the surface structure of aluminum can be modified, and aluminum and polymer structures can be joined are reviewed. For both topics, a new classification method is introduced: surface preparation methods are grouped based on the method of creating the surface structures, while joining technologies are grouped according to heat input and structural changes in the polymer material. In this article, “hot” joining technologies (in which so much heat is formed that the polymer material is melted) are reviewed. This grouping category includes techniques based on friction and induction, ultrasonic and laser welding, and some in‐situ joining technologies. With these, materials with highly different chemical structures and melting temperatures can be joined in fast cycles, in a reliable manner. In the coming years, more and more integrated structures containing aluminum‐polymer joints manufactured with fast, automatable joining techniques (such as ultrasonic and laser welding, in compliance with the requirements of Industry 4.0) will be used throughout the industry.
13 December 2019 in Journal of Applied Polymer Science
In this study, the mechanical properties of ultrasonic welded lap joints of all‐polypropylene composite (APPC) were investigated and compared to the interlaminar properties of the composite sheet itself. The process control parameter was welding time: welded samples were prepared with an ultrasonic welding machine in the 0.1–1.0 second time range. In most cases, the shear strength of the welded samples exceeded that of the unwelded APPC. Although it was found that during the ultrasonic welding process, the reinforcing tapes partially melted in the welding zone (WZ), the seam remained strong enough because the heat released and the pressure applied during the welding process further improved the consolidation of the APPC layers. © 2019 The Authors. Journal of Applied Polymer Science published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48799.
26 June 2017 in Journal of Adhesion Science and Technology
25 November 2022 in Polymer Testing
23 July 2022 in The International Journal of Advanced Manufacturing Technology
The aim of this paper is to determine the effect of aluminium surface preparation on the load-bearing capacity of laser-joined aluminium–polypropylene (Al-PP) specimens. The surface of the aluminium is prepared by chemical cleaning and laser engraving. The effect of pulse frequency, engraving speed and repetition number during laser engraving is investigated on the geometric parameters of the structure (straight groove) created on the surface of AA6082 aluminium alloy. Quasi-static shear testing of Al-PP joints is performed to determine how the amount and distance of the grooves affect the load-bearing capacity of the joints. The highest ultimate shear force (1250 ± 35 N) was achieved when many (21) grooves were formed with a laser engraving frequency of 20 kHz, a slow engraving speed (5 mm s−1) and many engraving repetitions (10) in the aluminium specimen. This corresponds to a shear strength of 3.1 MPa, which is 72.5% of the shear strength of the PP material used. Microscopic evaluation of joint cross-sections confirmed that the molten PP completely filled the grooves on the aluminium surface. Graphical abstract