The concept of nanogenerators (NGs) based on textiles was introduced to impart functional attributes to textiles for developing smart textiles and integrating wearable electronics of various functionalities. The human body can generate sufficient mechanical energy that can be harvested by the piezoelectric NGs (PENGs) and used to power up low power consuming wearable electronics. Two simple and easy approaches for coating a highly conductive weave-able metal electrode with polyvinylidene fluoride (PVDF) piezoelectric polymer to construct two different types of coaxial yarn-based PENGs (Y-PENGs) are presented in this paper. The proposed techniques result in the in-situ formation of the β phase of the PVDF. The Y-PENGs are based on facile solution coating and touchspun nanofibers (TSNFs) coating of the inner electrode. The solution-coated Y-PENG (SC-YPENG) showed 5.12 V of peak open-circuit voltage ( Voc ) and 41.25 nA of peak short circuit current ( Isc ). Whereas the TSNFs coated Y-PENG (NFC-YPENG) showed 5.08 V of peak Voc and 29.1 nA of peak Isc . In a series connection, the average peak Voc were synergized by ∼2.53 and ∼2.4 factor respectively for the SC-YPENG and the NFC-YPENG. The Y-PENGs were able to charge capacitors and run LEDs. Additionally, our coated inner electrode shows great flexibility, thereby it could be knitted or woven into smart textiles to run wearable electronics sustainably.
Interfacing an organic semiconductor C60 with a non-magnetic metallic thin film (Cu or Pt) has created a novel heterostructure that is ferromagnetic at ambient temperature, while its interface with a magnetic metal (Fe or Co) can tune the anisotropic magnetic surface property of the material. Here, we demonstrate that sandwiching C60 in between a magnetic insulator (Y3Fe5O12: YIG) and a non-magnetic, strong spin-orbit metal (Pt) promotes highly efficient spin current transport via the thermally driven spin Seebeck effect (SSE). Experiments and first principles calculations consistently show that the presence of C60 reduces significantly the conductivity mismatch between YIG and Pt and the surface perpendicular magnetic anisotropy of YIG, giving rise to enhanced spin mixing conductance across YIG/C60/Pt interfaces. As a result, a 600% increase in the SSE voltage (VLSSE) has been realized in YIG/C60/Pt relative to YIG/Pt. Temperature-dependent SSE voltage measurements on YIG/C60/Pt with varying C60 layer thicknesses also show an exponential increase in VLSSE at low temperatures below 200 K, resembling the temperature evolution of spin diffusion length of C60. Our study emphasizes the important roles of the magnetic anisotropy and the spin diffusion length of the intermediate layer in the SSE in YIG/C60/Pt structures, providing a new pathway for developing novel spin-caloric materials.