29 August 2024 in Advanced Materials
The self‐assembly and nonsolvent‐induced phase separation (SNIPS) process of block copolymers and solvents enables the fabrication of integral‐asymmetric, isoporous membranes. An isoporous top layer is formed by evaporation‐induced self‐assembly (EISA) and imparts selectivity for ultrafiltration of functional macromolecules or water purification. This selective layer is supported by a macroporous bottom structure that is formed by nonsolvent‐induced phase separation (NIPS) providing mechanical stability. Thereby the permeability/selectivity tradeoff is optimized. The SNIPS fabrication involves various physical phenomena—e.g., evaporation, self‐assembly, macrophase separation, vitrification – and multiple structural, thermodynamic, kinetic, and process parameters. Optimizing membrane properties and rationally designing fabrication processes is a challenge which particle simulation can significantly contribute to. Using large‐scale particle simulations, it is observed that 1) a small incompatibility between matrix‐forming block of the copolymer and nonsolvent, 2) a glassy arrest that occurs at a smaller polymer concentration, or 3) a higher dynamical contrast between polymer and solvent results in a finer, spongy substructure, whereas the opposite parameter choice gives rise to larger macropores with an elongated shape. These observations are confirmed by comparison to experiments on polystyrene (PS)‐block‐poly(4‐vinylpyridine) (P4VP) diblock copolymer membranes, varying the chemical nature of the coagulant or the temperature of coagulation bath.
11 January 2024 in Physical Review Materials
Two distinct linear triblock copolymers with different block sequences, ABA or BAB, are obtained when two identical AB diblock copolymers are jointed at their B or A ends, respectively, resulting in three homologous, AB diblock, ABA, and BAB triblock copolymers with the same chemical composition but different topologies. We demonstrate that the topological effect on the phase behaviors of these copolymers is amplified when A homopolymers are added to the system. Specifically, the phase behaviors of binary blends composed of ABA or BAB linear triblock copolymers and A homopolymers are studied by using the random-phase approximation (RPA) and self-consistent field theory (SCFT). The RPA analysis predicts that the Lifshitz point for the ABA/A blends behaves like a second-order transition but that for the BAB/A blends behaves like a first-order transition. The Lifshitz point of the BAB/A mixtures is found to occur at a much lower homopolymer concentration than that of the ABA/A mixtures, indicating a poorer miscibility of the A homopolymers into the BAB than ABA triblocks, which is also confirmed by SCFT. For sphere-forming triblock copolymers mixed with homopolymers, the poorer miscibility and the more diffused distribution of the A homopolymers in the BAB/A blends result in a phase behavior drastically different from that of the ABA/A and AB/A blends. The ABA/A blends stabilize the Frank-Kasper (FK) phases similar to the AB/A blends, but the stability window of FK phases becomes negligibly small in the corresponding BAB/A blends. Our results demonstrate that the topological effect of block copolymers on the equilibrium phase behaviors can be more prominent in multicomponent systems and thus more attention should be paid to copolymer topologies in the design of polymeric blends. Published by the American Physical Society 2024
24 October 2025 in Macromolecules
Combining self-consistent field theory and single-chain-in-mean-field simulations, we study the self-assembled morphology and structure size of binary diblock copolymer blends in equilibrium and after processingsuch as quenching, annealing, evaporation-induced self-assembly (EISA), and nonsolvent-induced phase separation (NIPS). The equilibrium phase diagrams reveal that adding long linear A2B2 copolymers to a melt of shorter, cylinder-forming linear A1B1 copolymers can enlarge the equilibrium cylinder radius by at least 3-fold before macrophase separation sets in. Our particle-based simulations uncover a strong dependence of structure size on processing pathways. Notably, blending A2B2 copolymers results in a higher magnification of cylinder radii in EISA compared to quenching or annealing. We further analyze how this blending strategy tailors the pore size and transforms the morphological characteristics of integral asymmetric isoporous membranes fabricated by NIPS. By blending in a second diblock copolymer that is 2.25 times the length of the host, a pore-size magnification of up to 70% can be achieved. With further optimization, a more than 2-fold increase appears attainable without significantly compromising membrane quality. Overall, our study offers insights into the structure-processing-property relationships in block copolymer systems and provides design principles for tailoring nanostructures through blend composition and processing strategies across a range of applications.
24 October 2025 in Macromolecules
The phase behavior of binary diblock copolymers features a complex interplay between microphase and macrophase separation. Using a combination of self-consistent field-theory (SCFT) and single-chain-in-mean-field (SCMF) simulations, we investigate the self-assembled morphologies of binary blends composed of two linear diblock copolymers, A1B1 and A2B2, both in equilibrium and under processing conditions such as sudden quenching and gradual annealing. We focus on cylinder- and lamella-forming copolymers, where the equilibrium phase diagrams exhibit wide macrophase-separation channels when the length asymmetry between short A1B1 and long A2B2 copolymers becomes sufficiently large. Notably, our particle-based simulations uncover a strong dependence of the resulting morphology on the processing pathway used to reach the same thermodynamic state point within the macrophase-separation channel. Quenching produces a homogeneous mixture of A1B1 and A2B2 copolymers, a narrow cylinder-size distribution, and stronger hexagonal order, whereas annealing induces local demixing of the two copolymers, yielding a bimodal size distribution and weaker hexagonal order. This process-dependent behavior originates from the complex free-energy landscape of the blends. Overall, our study provides insights into the structure–processing–property relationships in block copolymer systems and contributes to the development of rational processing strategies for targeted nanostructures.
3 November 2025 in The Journal of Chemical Physics
Conventional ordered phases of block copolymers are nanoscopic structures with discrete domains (spheres or cylinders) composed of the minority blocks embedded in a continuous matrix composed of the majority blocks. Inverted phases of block copolymers refer to the novel ordered structures with discrete domains composed of the majority blocks. In this work, the formation and relative stability of various inverted phases in AB/CD diblock copolymer blends are studied using self-consistent field theory. The results reveal that the ratio of the block copolymer lengths and the copolymer concentration play a crucial role in stabilizing the inverted structures, and the relative stability of various inverted phases depends sensitively on the interaction strengths. The spatial distribution of the different blocks is used to elucidate mechanisms for the formation of inverted phases. The findings provide insights into the formation of inverted phases and suggest design strategies for functional nanostructures with potential applications in nanolithography and photonic crystals.
18 September 2025 in Macromolecules