8 October 2018 in IEEE Transactions on Power Electronics
This paper aims to provide a road map for selecting power devices in soft-switched, MHz-frequency power converters. Minimizing C $_{\mathrm{OSS}}$ losses, which occur when charging and discharging the parasitic output capacitor of power semiconductors, is critical to efficient operation. These losses are excluded from manufacturer-provided information and measurements are either sparse or not reported at all in existing literature. We report the first high-frequency C $_{\mathrm{OSS}}$ loss data from Silicon Carbide (SiC) power MOSFETs, with a range of devices tested from 1-35 MHz and up to 800~V. In contrast to GaN HEMTs, C $_{\mathrm{OSS}}$ losses in SiC MOSFETs do not increase with dV/dt at these frequencies. 3-10% of the stored energy is dissipated in the measured SiC MOSFETs. We report new C $_{\mathrm{OSS}}$ loss measurements for vertical silicon MOSFETs and expand on existing measurements for superjunctions, finding high variance in C $_{\mathrm{OSS}}$ losses between devices for both constructions. High C $_{\mathrm{OSS}}$ losses preclude the tested silicon MOSFETs from efficient operation at MHz frequencies. Lastly, we compare devices in soft-switched applications using a loss calculation that includes these C $_{\mathrm{OSS}}$ losses, and demonstrate a 100 W, 17 MHz DC-RF inverter using a custom-packaged SiC MOSFET.
12 March 2019 in IEEE Transactions on Power Electronics
In this paper, we explore the challenges of implementing resonant converters using silicon carbide (SiC) power devices at high frequency: namely, the issue of high parasitic inductance packages and the ability to drive and enhance the mosfet at these frequencies. Although power circuit designers have many alternative device technologies to choose from, such as silicon and gallium nitride materials, SiC devices have several advantageous attributes especially in high power applications. As a solution, we study the device performance and parasitics of SiC mosfets in different packaging schemes. We further offer a solution to the challenges of driving SiC devices by demonstrating a multiresonant gate driver and use this scheme to drive an SiC mosfet at 30 MHz and a SiC JFET at 13.56 MHz in a class-E inverter, achieving 85.7% drain efficiency for the mosfet and 93.8% for the JFET.
21 February 2019 in IEEE Transactions on Industrial Electronics
This paper presents the design and implementation of a High-Frequency/Very-High-Frequency (HF/VHF) multi-resonant gate drive circuit. The design procedure outlined here is greatly simplified compared with other VHF self-oscillating multi-resonant gate drivers presented in previous works. The proposed circuit can reduce the long start-up time required in a self-oscillating resonant gate drive circuit and utilize the fast transient capability of VHF converters better. We demonstrate a prototype resonant gate driver, which reduces up to 60% of the gate driving power in a 20 MHz 32 W Class-E power amplifier using a Si MOSFET. The proposed technique could also drive a high-voltage rated SiC MOSFET at 30 MHz with a slew-rate of 2.5 V/ns at the gate, while an integrated hard-switching gate driver only provides a 1.8 V/ns slew-rate and is five times less efficient than the proposed resonant gate driver.
11 March 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
In high-frequency (HF) and very-high-frequency (VHF) rectifiers, silicon carbide (SiC) Schottky diodes exhibit higher losses compared to what is reported in manufacturer-provided simulation models, with additional power loss stemming from energy dissipation during the charging and discharging of the junction output capacitance (CJ). Because these losses are not included in manufacturer simulation models and have not been well-studied for commercially available SiC Schottky diodes, we have experimentally measured them using the Sawyer-Tower circuit. From these measurements, we compare the losses across manufacturers, current rating, generation, voltage rating, and packaging. We then demonstrate the performance of these devices on a 20-MHz class-DE rectifier and compare their power dissipation from the simulation and experimental measurements. Finally, by incorporating these losses in device power dissipation calculations in various rectifier topologies, we propose suggestions on device selection to optimize converter efficiencies.
6 January 2020 in IEEE Transactions on Power Electronics
This article presents various designs of toroidal air-core transformers utilizing a 3-D printing and electroplating fabrication methodology. For certain applications and switching frequency regimes, limitations in core-based magnetics force circuit designers to use air-core components, which are conventionally wire-wound, and thus, constrained to simple structures with poor copper coverage. 3-D printing offers a solution to this constraint and provides more flexibility for transformer designs. This article includes design calculations, finite-element method (FEM) simulations, and loss analysis for three different toroidal transformer designs: one which features nested toroids, coupling their N 2 flux, the second which uses stacked toroids, coupling the one-turn flux, and the third which interleaves two windings. Furthermore, the manufacturing procedure presented in this article allows for accurate modeling of the transformer's inductance matrix, which is advantageous over hand-wound air-core components. Additionally, we provide experimental demonstrations, including the implementation of these transformers in 100-W, 30-MHz resonant converters. Lastly, COMSOL FEM design automation MATLAB scripts for the various inductors and transformers discussed in this article are publicly available in the paper by Z. Tong (2019), allowing for fast parametric modeling of magnetic designs.
27 January 2022 in IEEE Open Journal of Power Electronics
Class E power amplifiers are widely used in high-frequency applications due to their simplicity and use of only one ground-referenced switch. However, Class E power amplifiers are usually tuned to operate at a fixed frequency due to their resonant nature. Extending the bandwidth of these switch-mode power amplifiers is beneficial in many applications, such as plasma generators and wireless power transfer systems. In this paper, we present a 1 kW wideband Class E power amplifier using Silicon Carbide (SiC) MOSFETs that achieves 93% efficiency at 13.56 MHz with a bandwidth of $\pm$ 1 MHz. We incorporate a reactance compensation network in the output loading stage to achieve wideband operation; design a custom gate drive circuit to reduce the gate power loss and improve thermal performance compared to using a gate driver IC. The total gate power of one SiC MOSFET is measured to be 1.55 W at 13.56 MHz.