Victor Kovalskiy

Victor Kovalskiy

Auto-generated profile, based on publicly available information

Victor Kovalskiy

Faculty of Civil Engineering, Thermal Power Engineering and Gas Supply, Vinnytsia National Technical University, Voiniv-Internatsionalistiv St. 7, 21000 Vinnytsia, Ukraine

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 September 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
MGMingjun Guo
Mingjun Guo
VKViktor Pavlovich Kovalskiy
Viktor Pavlovich Kovalskiy
Tengfei NianTengfei Nian
Tengfei Nian
PLPing Li
Ping Li
In seasonal frozen soil areas, the repeated freeze–thaw cycle of internal moisture in asphalt mixture in winter and spring will accelerate the peeling of asphalt film and aggravate the water damage of asphalt pavement. It is of great significance to carry out the attenuation law of mechanical properties of asphalt mixture under freeze–thaw cycles to prevent and reduce the economic losses caused by water damage to asphalt pavement. This study will investigate the impact of deicer application on the water stability of asphalt mixtures within the climatic conditions prevalent in Northwest China. Specifically, freeze–thaw cycle tests were administered to two types of dense-graded asphalt mixtures under three distinct deicer solutions and three disparate low-temperature environments. The Marshall water immersion test and freeze–thaw splitting test were employed to evaluate the water stability of asphalt mixtures subject to multiple factors, and the relative importance of each factor was statistically analyzed using the acquired data. Results demonstrated that AC-13 and AC-16 asphalt mixtures (AC is asphalt-concrete, which is asphalt concrete, and 13 or 16 represents the maximum particle size of aggregate (13 mm or 16 mm)), saturated in 15% CH4N2O, 20% NaCl, and 20% CH2CH3OH solutions, underwent a varying number of freezing–thawing cycles (0, 5, 10, 15, 20, 25, and 30) at temperatures of −5 °C, −15 °C, and −25 °C, respectively, displayed a discernible decline in their residual stability MS0 and freeze–thaw splitting tensile strength ratio TSR. This decline was particularly marked when temperatures dropped below the solution’s freezing point. Disregarding the fixed factors of weather variation (different low-temperature environments) and road service duration (number of freezing–thawing cycles), the aggregate grading imposed a more pronounced influence on asphalt mixture water stability than the presence of deicers.

6 June 2022 in Modern technology, materials and design in construction
Verified
Journal Article
Open access
PDF file
VKVictor P. Kovalskiy
Victor P. Kovalskiy
АБАльона Василівна Бондар
Альона Василівна Бондар
VAVita S. Abramovych
Vita S. Abramovych
Faced with the restrictions imposed on most Ukrainian cities due to increased quarantine due to the pandemic, all major recreational activities of the society began to take place in open urban spaces, which would allow to attract the necessary social distance. Respecting this trend, it is necessary to create a sufficient number of public spaces in the city that would meet all the needs of society. The latest articles substantiate the urgency of updating the public space in the city, the need to introduce new approaches to redevelopment for inactive urban areas. The main reasons for their degradation and the use of demand for certain functions that may carry a certain area are identified. Researched and deduced what features and principles contribute to the positive change of public space and its restoration in the urban system. When writing the last work, foreign and domestic experience was analyzed in accordance with each of the principles of revitalization of public spaces.

6 March 2018 in Modern technology, materials and design in construction
Verified
Journal Article
Open access
VUVinnytsia National Technical University
Vinnytsia National Technical University
VKV. Kovalskiy
V. Kovalskiy
OSO. Shamraeva
O. Shamraeva
У статті з’ясовано зміст поняття «бізнес-центри», «бізнес-парки». Визначено актуальність архітектурних рис. Зафіксовано важливу функціональну відмінність між бізнес-центрами і бізнес-парками. Визначено передумови виникнення бізнес-центрів. Наведено класифікацію за якою формуються «бізнес-центри», «ділові центри» та «бізнес-парки». Охарактеризовано кожен клас щодо відповідності їм бізнес-центрів. Розглянуто приклади бізнес-центрів в м.Київ та м.Вінниця для різних класів. Наведено відмінності між класами. Визначено цінність кожного класу в окремих функціональних районах міст. Сформовано завдання для проектування бізнес-центрів, які далі приведено в систему. Виокремлено основні процеси, що відбуваються в закордонних та вітчизняних бізнес-центрах. Виявлено основні функції, які необхідні для повноцінного існування бізнес-центрів. Визначено дві основні планувальні схеми, які формують об’ємно-просторову і планувальну структури бізнес-центрів. Розглянуто відповідність вимогам комбінованого планування. З’ясовано основні групи приміщень, що мають бути запроектовані в бізнес-центрах. Наведено види заходів, що найчастіше проходять у бізнес-центрах. Запропоновано рішення щодо раціонального розміщення груп приміщень в залежності від заходів, що проводяться. Сформовано таблицю з залежністю зв’язків між головними та допоміжними обслуговуючими приміщеннями у бізнес-центрах. Визначено найбільш бажані та необхідні зв’язки між групами. Розглянуто особливості містобудівного, функціонального та планувального формування. Проаналізовано сучасний рівень розвитку бізнес-центрів. Наведено основний принцип об'ємно-просторової побудови бізнес-центрів. Виявлено найбільш сучасний і основний принцип створення універсального та здатного до трансформації простору. Запропоновано використання гнучкого планування.

30 July 2023 in Modern technology, materials and design in construction
Verified
Journal Article
Open access
VKVictor P. Kovalskiy
Victor P. Kovalskiy
MGMingjun Guo
Mingjun Guo
The extensive use of deicing salt has not only solved the problem of road icing but also had a serious impact on the pavement, reducing its lifespan. In order to deeply understand the impact of deicing salt on the air voids of asphalt mixture in the northwest climate of China, this paper conducted freeze-thaw cycle tests on AC-13 and AC-16 asphalt mixtures under three different deicing salt solutions and three different low-temperature environments, and analyzed the changes in air voids, meanwhile, the Logistic prediction model was used to evaluate the change characteristics of the air voids. The experimental results showed that the air voids of asphalt mixture increased to varying degrees after multiple freeze-thaw cycles; when the temperature was above its freezing point, no frost heave damage occurred, and the air voids increased slowly; when the temperature was below the freezing point, frost heave damage occurred, causing rapid growth and connection of voids in the mixture, and the air voids increased rapidly; the Logistic model showed a good fit with the observed changes in air voids.

1 January 2021 in Modern technology, materials and design in construction
Verified
Journal Article
Open access
PDF file
VUVinnytsia National Technical University
Vinnytsia National Technical University
VKV. Kovalskiy
V. Kovalskiy
MDM. Drukovanyy
M. Drukovanyy
YOY. Oliinyk
Y. Oliinyk
The paper considers the problems of environmental pollution by radiation-hazardous and environmentally harmful elements. Radiation-hazardous pollution occurs in several directions, namely under the influence of constant natural radiation background, due to Chernobyl emissions, nuclear energy production, pollution of rivers and lakes, the use of building materials with high content of natural radionuclides. At present, Ukraine has suspended comprehensive measures to reduce radiation pollution in the construction industry due to the lack of effective methods to combat environmental safety and improve the demographic situation in the country. As ways to increase the radiation-protective properties of building materials, variants of structural models, construction technologies are considered, the introduction and improvement of which is a prospect of scientific development of the construction industry. For environmentally safe, economically feasible, systematically operated operation of building structures and construction sites in general, it is essential to adhere to the principles of radiation protection by optimizing the resource characteristics of the respective facilities. Therefore, the analysis of the relevance of the above methods of creating high-quality building materials, taking into account the indicators of increasing the radiation-protective properties of building materials.

6 August 2024 in Modern technology, materials and design in construction
Verified
Journal Article
Open access
PDF file
VKViktor Kovalskiy
Viktor Kovalskiy
VTVitalii Tymoshenko
Vitalii Tymoshenko
ПБПавло Степанович Боднар
Павло Степанович Боднар
МБМихайло Дмитрович Бондар
Михайло Дмитрович Бондар
ВКВіктор Павлович Ковальський
Віктор Павлович Ковальський
ВТВіталій Олександрович Тимошенко
Віталій Олександрович Тимошенко
An overview of modern research and experience in the use of fly ash in construction is carried out, examples of successfulcases of its application are given.The prospects of using fly ash, which occurs during the burning of coal in thermal power plants, in construction were studied.Fly ash, which is a byproduct of coal combustion, has great potential for reuse in the construction industry, which contributes toreducing the environmental burden and increasing the efficiency of the production of construction materials.The paper discusses in detail different methods of fly ash activation, such as mechanical, chemical and thermal activation, aswell as combined approaches that combine these methods to achieve optimal results. Mechanical activation involves increasingthe specific surface area of ash by grinding it, which helps to increase its reactivity. Chemical activation involves the use of various chemical reagents to increase the activity of ash, and thermal activation is based on increasing the solubility of silica and alumina with increasing temperature.Particular attention is paid to the use of nanomaterials, such as nanosilica, nanotitanium and nanoalumina, which cansignificantly improve the properties of construction mixtures. Nanomaterials help increase strength, reduce porosity and improve water resistance of mixtures. The use of polymer additives, such as polyvinyl acetate, latexes and polyethylene glycol, which increase the adhesion, elasticity and water resistance of building materials, is also considered.The influence of ash on the strength of building materials, as well as their resistance to aggressive factors, is considered. Inaddition, the impact of using ash on the energy efficiency of building materials and reducing carbon dioxide emissions isconsidered.The development of new formulations of construction mixtures using fly ash helps to increase their strength, durability andenvironmental safety. The article gives examples of the practical application of such mixtures, in particular, in self-leveling screeds for floors, plaster and putty mixtures, adhesive mixtures for tiles and waterproofing materials. Key benefits of these innovative solutions are highlighted, including lower production costs, improved material performance and reduced environmental impact.The research results show that the use of fly ash in construction has great potential. It allows to reduce the use of primarymaterials, improve the quality of construction materials and reduce the negative impact of the construction industry on theenvironment.The article emphasizes the importance of using fly ash and innovative additives for the sustainable development of theconstruction industry and suggests promising directions for further research in this field.