1 December 2018 in Inorganic Chemistry Communications
4 January 2022 in Bulletin of Materials Science
1 February 2016 in Advanced Science Letters
The electrical characterization of 65 nm NMOS transistor structure is simulated by the ATLAS simulator software and then it is compared with the reported experimental results. The input and output characteristics of the structure was studied. The simulated threshold voltage was found to be 0.2 V which matches well with the experimental value. Furthermore, various short channel effects like punch through, velocity saturation and hot electron effects are studied. From the study it was found that for higher drain voltage, the amount of gate voltage which the device will be able to sustain before giving rise to gate current is less.
1 March 2014 in Advanced Science Letters
The present work involves vertical Bridgman growth of bulk Te doped GaSb. Schottky contact was fabricated taking Au for barrier and In for Ohmic contact and its characterizations were taken both experimentally as well as simulation by using TCAD tool. Doping concentrations of Te is about 5.3×1017 cm−3 and barrier heights of 0.64 eV are found from C–V characterization, compared to 0.48 eV determined from I–V study at room temperature. Ideality factor was found to be 2.1 at room temperature study. Similar types of studies were done by TCAD simulation and the barrier height calculated from C–V and I–V analyses are 0.7 eV and 0.56 eV respectively at 300 K. Similarly ideality factor found from simulation study was 1.4 at 300 K. From these comparisons between experimental and simulated Schottky contact parameters it has been observed that the reduced barrier height and ideality factor are due to the unavoidable defect at the time of growth of Te doped GaSb and fabrication of device.
1 March 2014 in Advanced Science Letters