1 October 2014 in Acta Astronautica
1 August 2015 in Advances In Space Research
19 December 2014 in IEEE Aerospace and Electronic Systems Magazine
With the development of human space activities, the number of spacecraft in geostationary orbit (GEO) has increased dramatically. According to the European Space Agency (ESA), by the end of 2008, there were 1186 objects in GEO of which only 32% were controlled operational satellites [1]. In the GEO, there are also many malfunctioning or abandoned spacecraft and lots of space debris that need to be deorbited [2] orbiting alongside functioning spacecraft. It has become necessary to monitor and deorbit these uncontrolled spacecraft and space debris to afford a safe environment for operational spacecraft so that collisions can be avoided. To do this, several alternatives have been proposed by scholars and aerospace research institutions all over the world. Among the suggestions are the RObotic GEostationary orbit Restorer (ROGER) for orbital monitoring and deorbiting [3, 4], an ion beam shepherd for contactless space debris removal [5], electrodynamic tether deorbiting [6-8], deorbiting using solar radiation force [9-11], and space robots. [12, 13]
1 January 2014 in Mathematical Problems in Engineering
Solar sail can merely make use of solar radiation pressure (SRP) force as the thrust for space missions. The attitude dynamics is obtained for the highly flexible solar sail with control vanes, sliding masses, and a gimbaled control boom. The vibration equations are derived considering the geometric nonlinearity of the sail structure subjected to the forces generated by the control vanes, solar radiation pressure (SRP), and sliding masses. Then the dynamic models for attitude/vibration controller design and dynamic simulation are obtained, respectively. The linear quadratic regulator (LQR) based and optimal proportional‐integral (PI) based controllers are designed for the coupled attitude/vibration models with constant disturbance torques caused by the center‐of‐mass (cm)/center‐of‐pressure (cp) offset, respectively. It can be concluded from the theoretical analysis and simulation results that the optimal PI based controller performs better than the LQR based controller from the view of eliminating the steady‐state errors. The responses with and without the geometrical nonlinearity are performed, and the differences are observed and analyzed. And some suggestions are also presented.
17 March 2014 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
An accurate thrust model is extremely important for the navigation and space mission of solar sails. The thrust is deeply affected by the deformation of the highly flexible structure. Thus, in this paper, the exact thrust models for two-point and infinite-point-connected sails are presented by calculating the static deformations for the sail support beam structure with geometrical nonlinearity based on the assumption that the deformation of the sail film coincides with the support beam. And the film is merely regarded as the structure that transfers the solar radiation pressure force to the support beam. The nonlinear finite element model of the support beam with the Von-Karman’s nonlinear strain–displacement relationships is obtained. Then the Newton iteration method is used to calculate the large deformation of the sail structure. The thrust-modification methods are proposed for the two-connected sail. The deformation of the two-point-connected sail is larger than the infinite-point-connected sail, and the thrust loss of the two-point-connected sail is larger than the infinite-point-connected sail by nonlinear static calculations. Some suggestions are given based on the calculation results and relevant analysis. The thrust model should be verified and modified by in-flight data in the future.
11 June 2016 in CEAS Space Journal