The calculation of magnetically induced vibrations in the stator of an electric machine involves, on the one hand, the determination of the magnetic forces originating from the air gap field and, on the other hand, the calculation of the mechanical eigenmodes and eigenfrequencies. This work presents a new method for the mechanical modelling of the stator using shell elements in 3D, as an extension of a recently published method using beam elements in 2D. It is applied to the case of a hydro generator with a complex mechanical construction, including the frame, and the results are validated by measurements performed on a 55MVA machine. It is shown that the developed method allows a time-efficient calculation of the eigenmodes and eigenfrequencies, providing an advantageous alternative to the classical analytical and finite element (FE) methods typically used for this purpose. This outcome is particularly relevant and applicable to the design and optimisation of large electric machines, as well as troubleshooting vibration problems in existing machines.
Structural vibrations caused by magnetic forces in synchronous machines constitute a multi-domain problem involving both electromagnetic and mechanical phenomena. Recent years have seen an increasing effort in the scientific community to improve the capabilities of the calculation models used to assess this problem. On the one hand, this trend contributes to increasing the accuracy of the calculated results obtained. But, on the other hand, the increased complexity of the models tends to make the identification of cause-effect relationships more difficult. In this context, this work proposes a new graphical tool for the comprehensive analysis of stator core vibrations in synchronous machines. The development of a holistic diagram for the root cause analysis of the electromagnetic and mechanical phenomena, called the vibration cause diagram (VCD), is presented and applied to two example machines of different sizes. The analysis method obtained is particularly useful during the design phase of a new machine or for the troubleshooting evaluation of the existing machines.
15 February 2022 in IEEE Transactions on Magnetics
A new calculation approach for the contribution of the stator end winding field to the clamping plate field in large synchronous machines based on Biot–Savart (BS) law and Schwarz–Christoffel (SC) mappings is proposed in this article. The new field calculation appeals due to its low computational cost in the range of hundreds of milliseconds. The field normal to the clamping plate as well as the tangential clamping plate flux is compared to magnetostatic 3-D finite element analysis (FEA) simulations for multiple operating points of a test generator geometry, with both calculation approaches being in good agreement.