11 August 2021 in IEEE Access
This contribution introduces a vector interpretation to unify the description of torque development in rotating electrical machines. The motivation behind this attempt is the necessity of applying different physical interpretation and calculation methods, such as Lorentz force, Maxwell stress tensor, co-energy methods etc., for predicting and estimating different torque components, e.g. synchronous torque, oscillating torque, cogging torque, reluctance torque etc., in different rotating electrical machines. The unified vector model describes and estimates the different torque components in rotating electrical machines with an apprehensible concise formulation. Beyond that, the other most frequently used tools and terms in the field of electrical machines, such as Park and Clark transformations, phasor diagram etc., can be derived directly from this model, which has also a simplifying didactic contribution to a conventional course of electrical machines.
23 December 2020 in IEEE Access
The radial and tangential force components acting on each sub-conductor of a Roebel bar in a large generator lead to mechanical vibration of the stator bars in the slot. This double-frequency vibration results in additional mechanical stress on fixation materials in the slot and causes insulation deterioration and looseness of stator bars. Particularly during short circuits, the stator bars are subjected to immense radial forces. Understanding the origin of these vibrations and developing models to anticipate them is essential to increase the reliability and expected life time of large generators. This paper presents an analytical method for the estimation of Roebel bar forces during symmetrical and asymmetrical short circuits. For this purpose, an analytical calculation method is developed to estimate the transient three-phase currents during different short circuits. These currents induce tangential and radial flux density components along the slot width and length, respectively. An analytical approach is introduced to estimate these flux densities as a function of the slot length. Subsequently, an analytical method for calculating the Roebel bar forces considering three-dimensional transpositions is developed and verified with finite element calculations. Beyond the state of the art, the impact of the rotor field on the radial and tangential components of the stray fluxes are analytically estimated. The result is a comprehensive analytical tool for the estimation of Roebel bar forces during different short circuits in large generators.
15 June 2023 in IEEE Transactions on Industry Applications
The stator core vibration caused by electromagnetic forces is an important topic in the design of electric machines. A crucial task for the comprehensive analysis of this issue is to accurately estimate the eigenmodes and eigenfrequencies of the mechanical system, which allows the calculation of the forced mechanical response. This paper presents a new analytical model based on beam elements as an alternative to the typical finite-element (FE) and classical analytical models applied for this purpose assuming a 2D simplification of the system. The proposed model takes the stator yoke and teeth into account and is able to predict the eigenmodes, eigenfrequencies and forced response of the stator core of rotating electric machines, such as synchronous and induction motors. The results are compared to FE and analytical calculations and validated based on measurements on the stator core of a permanent magnet synchronous motor.
29 July 2024 in IEEE Access
The calculation of magnetically induced vibrations in the stator of an electric machine involves, on the one hand, the determination of the magnetic forces originating from the air gap field and, on the other hand, the calculation of the mechanical eigenmodes and eigenfrequencies. This work presents a new method for the mechanical modelling of the stator using shell elements in 3D, as an extension of a recently published method using beam elements in 2D. It is applied to the case of a hydro generator with a complex mechanical construction, including the frame, and the results are validated by measurements performed on a 55MVA machine. It is shown that the developed method allows a time-efficient calculation of the eigenmodes and eigenfrequencies, providing an advantageous alternative to the classical analytical and finite element (FE) methods typically used for this purpose. This outcome is particularly relevant and applicable to the design and optimisation of large electric machines, as well as troubleshooting vibration problems in existing machines.