1 February 2025 in Physics of Fluids
Wheel–rail rolling contact is a complex tribological issue, especially the existence of a thin water film on the rail surface, which leads to low adhesion problems for the traction and braking performance of the railway trains. The objective of this paper is to propose a non-Hertzian dynamic wheel–rail adhesion model for trains passing through wet curved tracks considering wheel–rail surface roughness. A vehicle-track coupling dynamics model was first developed to output the wheel–rail dynamic contact parameters under wet conditions. These parameters were subsequently utilized as dynamic inputs for the present wheel–rail adhesion model to simulate dynamic curve passing. The present numerical model includes the normal contact model and tangential model. For the normal contact issue, an elastohydrodynamic lubrication model was used to accurately determine the normal contact stress within the contact patch along the contact traces. Based on the normal contact characteristics, the advanced extended creep force model was used to compute the tangential stress. Finally, the dynamic wheel–rail adhesion coefficient can be obtained. This model considers the effects of time variation and changes in contact geometry, resulting in sudden increases or decreases in the adhesion coefficient at certain locations. At a speed of 400 km/h, a higher spin creepage occurs, leading to an increased displacement of the third-body layer and causing the maximum tangential stress to shift from one side of the contact patch to the other. Under the combined influence of the creepages, the maximum tangential stress occurs at the trailing edge of the contact patch.
20 June 2025 in Tribology International
27 October 2024 in Lubrication Science
4 May 2026 in Tribology International
1 June 2026 in Physics of Fluids
Wheel–rail adhesion is not a singular physical process but a dynamic response system arising from the complex interplay of spin, rolling–sliding motion, thermal effects, surface roughness, and environmental media. Understanding these interacting mechanisms is essential for train operational safety. This paper proposes a novel three-dimensional dynamic numerical model aimed at elucidating the adhesion mechanism under thermal mixed lubrication conditions, with a focus on the strong coupling among fluid, thermal, and roughness effects. The model consists of three key modules: a vehicle-track coupled dynamics model (VTDM) considering water lubrication, a kinematic model of the wheel–rail contact interface, and a dynamic wheel–rail adhesion model. Time-varying rolling contact parameters are obtained using the VTDM and fed into the kinematic model to determine the velocity field within the contact patch, followed by the solution of the dynamic adhesion model under thermal mixed lubrication conditions. Simulation results reveal that the lateral velocity component induced by spin and lateral creepage generates an asymmetric temperature distribution within the fluid-filled contact patch, with heat concentrated in the lateral direction, leading to localized attenuation of the fluid film. This effect is particularly pronounced at the trailing edge of the contact patch, where concentrated thermal stress renders it a primary location for fatigue crack initiation. The proposed three-dimensional model integrates fluid medium characteristics, spin motion, thermal effects, and surface roughness into a unified framework, providing a more comprehensive and mechanism-driven analytical tool for predicting wheel–rail adhesion behavior under complex operating conditions.