3 November 2020 in IEEE Access
The Ant Colony Optimization (ACO) is easy to fall into the local optimum and its convergence speed is slow in solving the Travelling Salesman Problem (TSP). Therefore, a Slime Mold-Ant Colony Fusion Algorithm (SMACFA) is proposed in this paper. Firstly, an optimized path is obtained by Slime Mold Algorithm (SMA) for TSP; Then, the high-quality pipelines are selected from the path which is obtained by SMA, and the two ends of the pipelines are as fixed-point pairs; Finally, the fixed-point pairs are directly applied to the ACO by the principle of fixed selection. Hence, the SMACFA with fixed selection of high-quality pipelines is obtained. Through the test of the chn31 in Traveling Salesman Problem Library (TSPLIB), the result of path length was 15381 by SMACFA, and it was improved by 1.42% than ACO. The convergence speed and algorithm time complexity were reduced by 73.55 and 80.25% respectively. What’s more, under the ten data sets of TSPLIB, SMACFA outperformed other algorithms in terms of the path length, convergence speed and algorithm time complexity by comparison experiments. It is fully verified that the performances of SMACFA is superior to others in solving TSP.
7 March 2024 in IEEE Transactions on Instrumentation and Measurement
Accurate identification of manipulator dynamics parameters is crucial for achieving precise control and optimal performance in various robotic applications. Existing methods primarily utilize least squares or weighted least squares for dynamic parameters identification which cannot effectively integrate nonlinear friction model and satisfy physical feasibility constraints. Consequently, this study proposed an iteratively semi-linearized approach for identifying dynamic parameters of manipulator based on nonlinear friction models. First, the nonlinear friction model parameters of joint are pre-identified to prepare for feasibility base parameter estimation. Secondly, to establish a semi-linearized dynamic model, the robot and friction torque are separated, allowing for the linearization of the robot dynamic model while preserving the nonlinearity of the friction model. Utilizing this semi-linearized model, an iterative identification network is established to accurately identify dynamic parameters. This method effectively satisfies physical feasibility constraints and integrates various nonlinear friction models, resulting in improved identification accuracy. Furthermore, it seamlessly incorporates geometric metrics to better align the identified dynamic parameters with the actual physical system. Finally, the utilization of neural network-based nonlinear compensation technology further reduces identification errors. A series of experiments were conducted using a self-developed nine-degrees-of-freedom redundant manipulator. The experimental results demonstrated the efficiency and superiority of the proposed algorithm through performance comparison with various methods and friction models. A comprehensive analysis and discussion have revealed the underlying principles of this approach.
11 August 2024 in Nonlinear Dynamics
12 August 2024 in IEEE/ASME Transactions on Mechatronics
Physical human–robot interaction (pHRI) is important for seamless collaboration, improved efficiency, and flexibility whilst robots perform their tasks. Unlike many studies that have focused primarily on single-arm manipulator pHRI, this study specifically addressed the pHRI challenges associated with dual-arm manipulator systems, which can be more difficult problems to solve owing to the inclusion of force couplings, kinematic constraints, uncalibrated trajectory deviations, and uncertainties related to the controlled object. Specifically, this study proposed a human-intention estimation and two-level admittance adaptation control scheme for dual-arm manipulators pHRI, to estimate unknown human motion intent, reduce human effort, and implement effective force control under conditions of uncertainty. An adaptive neural network was employed to estimate the unknown human motion intent, enabling two manipulators to actively follow human movements. An object-level force feedback variable damping admittance controller (FFVDAC) was proposed to enhance pHRI compliance and minimize human effort by adjusting the damping parameters. In addition, a novel manipulator-level neural-network-based variable stiffness admittance controller (NNVSAC) was proposed to effectively control the internal forces under conditions of uncertainty. The stability of the object-level FFVDAC and manipulator-level NNVSAC were demonstrated through the Routh criterion and Lyapunov stability analysis, respectively. To confirm the feasibility and superiority of the proposed pHRI control scheme, a series of pHRI and dual-arm manipulators cooperation experiments were conducted using two redundant manipulators. The results clearly demonstrated that the proposed control scheme can successfully reduce human effort and internal force oscillations. Moreover, comparative analysis revealed the proposed algorithm's superior performance.
29 July 2025 in ISA Transactions