We report a 190-GHz amplifier designed into a 250-nm InP HBT technology. The four-stage amplifier at 76-mW dc power $P_{\mathrm {dc}}$ demonstrates 25-dB $S_{21}$ gain and 24-GHz 3-dB bandwidth. At 190-GHz operation, the saturated output power $P_{\mathrm {sat}}$ is 9.7-mW with 9.4% PAE and 16.4-dB large-signal gain. The 1-dB gain compression power OP1dB is 3-dBm. Biased at 97-mW $P_{\mathrm {dc}}$ using higher HBT collector voltage, the amplifier demonstrates 22.4-dB $S_{21}$ gain and 26-GHz 3-dB bandwidth. At 190-GHz operation, $P_{\mathrm {sat}}$ increases to 12.7-mW with 9.5% PAE and 19.2-dB large-signal gain. The OP1dB is also 3 dBm. Very similar OP1dB, $P_{\mathrm {sat}}$ , and PAE large-signal characteristics were observed at 185- and 195-GHz operation. This letter represents world-class efficiency and record 1.59-W/mm power density for an InP HBT amplifier operating at G-band, and it competes equally well with the state-of-the-art results demonstrated in advanced InP HEMT, SiGe HBT, and CMOS technologies.
13 January 2022 in IEEE Microwave and Wireless Components Letters
We report a five-gain-stage 150–175-GHz solid-state power amplifier (PA, SSPA) monolithic microwave integrated circuit (MMIC) having modest 20–21-dBm output power $P_{\mathrm {out}}$ , high gain, and high power-added efficiency (PAE). The transistor technology is 250-nm InP HBT. The $S_{21}$ gain is 31.4 ± 1.2 dB from 100 to 178 GHz. The 3-dB $S_{21}$ bandwidth is between 96 and 181 GHz. Typical return loss values for $\vert S_{11}\vert $ and $\vert S_{22}\vert $ exceed 8.5 and 10 dB, respectively. The dc power is 0.72 W. Across 150–175 GHz, the saturated output power $P_{\mathrm {sat}}$ is 106–126 mW with 16–18-dB gain and 12.5%–16.2% PAE—peak values for $P_{\mathrm {out}}$ , gain, and PAE are at 170-GHz operation. The 1-dB gain compression $P_{\mathrm {out}}$ (OP $_{\mathrm {1\,dB}}$ ) is 30–60 mW. Across the $D$ -band (110–170 GHz), $P_{\mathrm {sat}}$ is 82–126 mW with 9.1%–16.2% PAE. This work establishes a 1.62– $1.89\times $ increase to PAE over 150–175 GHz operation at the output power and gain levels cited. It is also the highest RF output power demonstrated across the full 110–170-GHz WR6.5 waveguide band.
12 April 2024 in IEEE Transactions on Microwave Theory and Techniques
We report a three-stage power amplifier (PA), using 250-nm indium phosphide (InP) heterojunction bipolar transistors (HBTs), that achieves 18.4% peak power-added efficiency (PAE) with 18.8-dBm associated output power ( $P_\text{out}$ ) and 13.8-dB associated power gain at 221.5 GHz. The amplifier has 19.5-dB peak $S_\text{21}$ and 212–238-GHz 3-dB bandwidth. The output stage combines the output power of four power transistor cells, each cell being a capacitively degenerated common-base stage with four parallel HBTs, each HBT having 5- $\mu\text{m}$ emitter length. Within each power transistor cell, separate base dc bias resistances for each emitter finger significantly increase the safe operation area (SOA), allowing dc bias at a greater collector current density at any given collector–emitter voltage. The increased SOA improves the amplifier $P_\text{out}$ and power-added efficiency (PAE). The simulated loss of the 4:1 output power combiner is only 1 dB at 230 GHz. To the authors’ knowledge, this is the highest published PAE for a transistor amplifier operating above 200 GHz.
28 January 2020 in IEEE Microwave and Wireless Components Letters
We report a three-gain-stage 88-104-GHz W-band solid-state power amplifier (SSPA) monolithic microwave integrated circuit (MMIC) having modest 100-140-mW output power (Pout), high gain, and high power-added efficiency (PAE). The MMIC technology is 250-nm InP HBT. PA S₂₁ gain is 29.5 dB with ±0.5-dB variation. PA 3-dB S₂₁ gain roll-off is between 88 and 104.5 GHz with high | S₁₁| and | S₂₂| return losses. DC power (Pdc) is 0.41 W. Across 88 -104 GHz, the PA-saturated output power Psat is 100-120 mW with greater than 20-dB power gain and 20% PAE. At 92 GHz, peak 120-mW Pout with 20-dB gain and 24.7% PAE is demonstrated. Pout at 1-dB gain compression OP1-dB is estimated to be 15-17 dBm. At 94 GHz and an elevated output stage bias (0.50-W Pdc), 140-mW Pout with 20-dB gain and 24.4% PAE is demonstrated. This work contributes to and improves the state of the art for W-band PAs in the simultaneous performance areas of power, gain, and PAE.
16 February 2024 in IEEE Microwave and Wireless Technology Letters
We report a two gain-stage 220-GHz solid-state power amplifier (SSPA) monolithic integrated circuit (MMIC) having high output power ( $P_{\text{out}}$ ) and record power-added efficiency (PAE) exceeding 20% above 200-GHz operation. The transistor technology is 130-nm InP HBT. The $S_{21}$ mid-band gain is 13.9-dB. Typical return loss values for $\vert S_{11}\vert $ and $\vert S_{22}\vert $ exceed 6.3-and 12.7-dB, respectively. The dc power dissipation is 183-mW ( $P_{\text{dc}}$ ). From 217.5-to 225-GHz, the saturated output power $P_{\text{sat}}$ is 57–62-mW (1.78–1.93 W/mm RF power density) with 6.1–6.5 dB gain and 20%–23.8% PAE–peak values for $P_{\text{out}}$ , gain, and PAE are at 220-GHz operation. The 1-dB gain compression $P_{\text{out}}$ (OP $_{1\,\text{dB}}$ ) at 220-GHz is 31.6-mW with 15.9% PAE. The power amplifier is very compact, 0.192-mm $^{2}$ in size. This work represents the first solid-state power amplifier operating above 200-GHz having PAE greater than 20%. Compared to the previous state-of-the-art, PAE has been increased by 1.36 times; however, when compared to 200-GHz PAs with similar output power, state-of-the-art PAE has instead been increased by 2.3 times.