Miguel Urteaga

Miguel Urteaga

Auto-generated profile, based on publicly available information

Miguel Urteaga

Teledyne Scientific Company, Thousand Oaks, CA, USA

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 January 2018 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
KSKeisuke Shinohara
Keisuke Shinohara
CKCasey King
Casey King
ACAndrew D. Carter
Andrew D. Carter
EREric J. Regan
Eric J. Regan
AAAndrea Arias
Andrea Arias
BBBerinder Brar
Berinder Brar
In this letter, we report on GaN-based field-effect transistors with laterally gated two-dimensional electron gas (2DEG). The drain current of the transistor is controlled solely by modulating the width of the 2DEG between buried gates. The lateral Schottky gate contact to the GaN channel layer enhances electron confinement by raising electrostatic potential below the 2DEG, improving isolation between the source and drain. Complete elimination of a top-contact gate reduces the density of trapped electrons near the surface and alleviates capacitive coupling between the trapped electrons and the 2DEG. Owing to the unique device structure and operation principle, the 150-nm-gate transistors with a channel width of 250 nm demonstrated: extremely small output conductance, drain-induced barrier lowering, knee voltage, and knee current collapse, greatly reduced gm derivatives near threshold, and nearly constant RF gain along the resistive load line. Furthermore, a preliminary accelerated life test indicated enhanced device reliability due to an absence of the inverse piezoelectric effect. The proposed transistors hold great promise for realizing reliable and efficient power amplifiers with improved transistor linearity.

20 March 2019 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
ZGZach Griffith
Zach Griffith
MUMiguel Urteaga
Miguel Urteaga
PRPetra Rowell
Petra Rowell

9 November 2017 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
ZGZach Griffith
Zach Griffith
MUMiguel Urteaga
Miguel Urteaga
PRPetra Rowell
Petra Rowell
We report a 190-GHz amplifier designed into a 250-nm InP HBT technology. The four-stage amplifier at 76-mW dc power $P_{\mathrm {dc}}$ demonstrates 25-dB $S_{21}$ gain and 24-GHz 3-dB bandwidth. At 190-GHz operation, the saturated output power $P_{\mathrm {sat}}$ is 9.7-mW with 9.4% PAE and 16.4-dB large-signal gain. The 1-dB gain compression power OP1dB is 3-dBm. Biased at 97-mW $P_{\mathrm {dc}}$ using higher HBT collector voltage, the amplifier demonstrates 22.4-dB $S_{21}$ gain and 26-GHz 3-dB bandwidth. At 190-GHz operation, $P_{\mathrm {sat}}$ increases to 12.7-mW with 9.5% PAE and 19.2-dB large-signal gain. The OP1dB is also 3 dBm. Very similar OP1dB, $P_{\mathrm {sat}}$ , and PAE large-signal characteristics were observed at 185- and 195-GHz operation. This letter represents world-class efficiency and record 1.59-W/mm power density for an InP HBT amplifier operating at G-band, and it competes equally well with the state-of-the-art results demonstrated in advanced InP HEMT, SiGe HBT, and CMOS technologies.

13 January 2022 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
ZGZach Griffith
Zach Griffith
MUMiguel Urteaga
Miguel Urteaga
PRPetra Rowell
Petra Rowell
LTLan Tran
Lan Tran
We report a five-gain-stage 150–175-GHz solid-state power amplifier (PA, SSPA) monolithic microwave integrated circuit (MMIC) having modest 20–21-dBm output power $P_{\mathrm {out}}$ , high gain, and high power-added efficiency (PAE). The transistor technology is 250-nm InP HBT. The $S_{21}$ gain is 31.4 ± 1.2 dB from 100 to 178 GHz. The 3-dB $S_{21}$ bandwidth is between 96 and 181 GHz. Typical return loss values for $\vert S_{11}\vert $ and $\vert S_{22}\vert $ exceed 8.5 and 10 dB, respectively. The dc power is 0.72 W. Across 150–175 GHz, the saturated output power $P_{\mathrm {sat}}$ is 106–126 mW with 16–18-dB gain and 12.5%–16.2% PAE—peak values for $P_{\mathrm {out}}$ , gain, and PAE are at 170-GHz operation. The 1-dB gain compression $P_{\mathrm {out}}$ (OP $_{\mathrm {1\,dB}}$ ) is 30–60 mW. Across the $D$ -band (110–170 GHz), $P_{\mathrm {sat}}$ is 82–126 mW with 9.1%–16.2% PAE. This work establishes a 1.62– $1.89\times $ increase to PAE over 150–175 GHz operation at the output power and gain levels cited. It is also the highest RF output power demonstrated across the full 110–170-GHz WR6.5 waveguide band.

12 April 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
AAAmirreza Alizadeh
Amirreza Alizadeh
PRPetra V. Rowell
Petra V. Rowell
ZGZach Griffith
Zach Griffith
MUMiguel E. Urteaga
Miguel E. Urteaga
MRMark J. W. Rodwell
Mark J. W. Rodwell
We report a three-stage power amplifier (PA), using 250-nm indium phosphide (InP) heterojunction bipolar transistors (HBTs), that achieves 18.4% peak power-added efficiency (PAE) with 18.8-dBm associated output power ( $P_\text{out}$ ) and 13.8-dB associated power gain at 221.5 GHz. The amplifier has 19.5-dB peak $S_\text{21}$ and 212–238-GHz 3-dB bandwidth. The output stage combines the output power of four power transistor cells, each cell being a capacitively degenerated common-base stage with four parallel HBTs, each HBT having 5- $\mu\text{m}$ emitter length. Within each power transistor cell, separate base dc bias resistances for each emitter finger significantly increase the safe operation area (SOA), allowing dc bias at a greater collector current density at any given collector–emitter voltage. The increased SOA improves the amplifier $P_\text{out}$ and power-added efficiency (PAE). The simulated loss of the 4:1 output power combiner is only 1 dB at 230 GHz. To the authors’ knowledge, this is the highest published PAE for a transistor amplifier operating above 200 GHz.

28 January 2020 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
ZGZach Griffith
Zach Griffith
MUMiguel Urteaga
Miguel Urteaga
PRPetra Rowell
Petra Rowell
We report a three-gain-stage 88-104-GHz W-band solid-state power amplifier (SSPA) monolithic microwave integrated circuit (MMIC) having modest 100-140-mW output power (Pout), high gain, and high power-added efficiency (PAE). The MMIC technology is 250-nm InP HBT. PA S₂₁ gain is 29.5 dB with ±0.5-dB variation. PA 3-dB S₂₁ gain roll-off is between 88 and 104.5 GHz with high | S₁₁| and | S₂₂| return losses. DC power (Pdc) is 0.41 W. Across 88 -104 GHz, the PA-saturated output power Psat is 100-120 mW with greater than 20-dB power gain and 20% PAE. At 92 GHz, peak 120-mW Pout with 20-dB gain and 24.7% PAE is demonstrated. Pout at 1-dB gain compression OP1-dB is estimated to be 15-17 dBm. At 94 GHz and an elevated output stage bias (0.50-W Pdc), 140-mW Pout with 20-dB gain and 24.4% PAE is demonstrated. This work contributes to and improves the state of the art for W-band PAs in the simultaneous performance areas of power, gain, and PAE.