1 October 2009 in Expert Systems with Applications
GAGeorgios Athanasopoulos
CAChristina Athanasopoulou
30 May 2008 in Rapid Prototyping Journal
Purpose – This paper seeks to present the results of a study carried out within rapid manufacturing (RM) service providers and engineering centres in Northern Spain. By disclosing strategies for their everyday operation, it is intended to show how the internal expertise acquired overtime copes with the lack of standards within this industry. Design/methodology/approach – The study was deployed by means of a survey including four main issues: RM concepts, process planning, materials and costs. Questions range from general RM perceptions to specific production criteria like: layer thicknesses, laser power, quality assurance methods, etc. A special emphasis is made on cost parameters, since they play a major role when selecting the final manufacturing route. Findings – The so-called “de facto standards” were found to be widely used in order to minimize production risks for RM. The study also suggests the need for specific RM standards based on key issues like material recycling, process planning and costs assignment. Practical implications – The study is mainly focused on additive RM processes used in Spanish centres. Although, some other technologies applied elsewhere might not be considered, it is assumed that most of the technologies mentioned in this study are available worldwide, thus providing valuable information to increase the general RM base of knowledge. Originality/value – Unlike most of the RM literature based on benchmarking of processes to provide information, this paper shows first hand data from users and service providers, showing RM practices and preferences from a different approach.
21 March 2015 in The International Journal of Advanced Manufacturing Technology
1 August 2006 in Journal of Engineering Design
In the process of mechanical design, tolerances are of crucial importance because decisions related to tolerances can have a decisive influence in terms of the product cost and quality. At present, there are numerous approaches and investigations related to the analysis and/or synthesis of tolerances and the modelling of assemblies. In this article, we look at the basic essentials required to deal correctly with the functional requirements and the geometric tolerances at the specification stage of the design process, in such a way as to guarantee the subsequent computer-aided tolerance synthesis at the basic and detail design stages. To achieve this aim, we developed an experience-based method. Applying this method to a set of real cases provided by the Industrial Equipment Design Centre at the Polytechnical University of Catalonia has enabled us to adjust the method to suit the application. The objectives proposed in this work are reached by the obtained results through applying the method.
24 March 2022 in Energy Sources, Part B: Economics, Planning, and Policy
The management of energy systems with a high share of renewables is a challenge for grid planners and operators, as weather and energy demand do not always coincide. Investigating the energy autonomy of cities and their local energy resources can help to overcome this challenge. To this end, real energy demand data from the city of Loja, Ecuador, and wind energy generation from a nearby wind farm were compared. This showed that wind energy provides 53% of the city’s demand. It is exposed that despite the excess energy, the wind farm’s ability to supply the city with electricity is limited to about 74% when the wind farm is expanded to twice its rated capacity. The results show that in order to improve the autonomy, other energy sources, such as photovoltaic, as well as useful size energy storage are needed.
20 June 2011 in Concurrent Engineering
Taking into account the global competitive environment and the impact of collaborative engineering environments on Small and Medium-sized Enterprises, it has now become necessary to develop new models and tools that can keep helping the designers and engineers in the decision-making processes related to the product design lifecycle. The tolerance synthesis purpose is to provide a rational basis for assigning tolerances to dimensions, and it has become an important subject in the product design process. The aim of this research work is to present an approach to support a concurrent conceptual tolerance synthesis evaluation process in a mechanical design within a collaborative engineering environment context, for example, Virtual Enterprise. The reference model proposed was developed and refined through a set of mechanical design study cases. The analysis and reflections of the study case presented in this manuscript are described in detail to show an example of how the different study cases were used to develop an understanding of how the reference model proposed can stimulate the conceptual synthesis evaluation of tolerances in the product design process.