Kumar Vaibhav Srivastava

Kumar Vaibhav Srivastava

Auto-generated profile, based on publicly available information

Kumar Vaibhav Srivastava

Department of Electrical Engineering, Indian Institute of Technology Kanpur, Kanpur, India

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 September 2013 in Journal of Applied Physics
Verified
Journal Article
Closed access
SBSomak Bhattacharyya
Somak Bhattacharyya
SGSaptarshi Ghosh
Saptarshi Ghosh
KSKumar Vaibhav Srivastava
Kumar Vaibhav Srivastava
In this paper, we propose a triple band polarization-independent metamaterial absorber using square-shaped closed ring resonators over wide angle of incidence. The unit cell consisting of various square loops is designed by using the parametric analysis so that it exhibits a triple band absorption response with two bands lying in C-band and one in X-band for airborne and surveillance radar signal absorption applications. Furthermore, in X-band, the absorber exhibits a broadband response with full width at half maxima bandwidth of 940 MHz (9.43%). The structure exhibits bandwidth enhanced properties for any angle of polarization under normal incidence. It also shows high absorption for wide angle of incidence up to 60°. The proposed structure is fabricated and experimental results show proper matching with the simulated responses.

2 November 2018 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
YTYakeen Tayde
Yakeen Tayde
MSMondeep Saikia
Mondeep Saikia
KSKumar Vaibhav Srivastava
Kumar Vaibhav Srivastava
SRSubramanian Anantha Ramakrishna
Subramanian Anantha Ramakrishna
Design and implementation of a broadband polarization-insensitive multi-layered microwave absorber using resistive ink has been presented here. The proposed absorber is constructed using layers of resistive surface where each layer consists of periodic arrangement of resistive patterns printed on a low cost FR4 sheet using resistive ink. Due to multilayer in nature, the proposed absorber shows broadband absorption having simulated reflection co-efficient less than -10dB in the frequency range from 2.00 GHz to 18.50 GHz under normal incidence which covers the entire S, C, X and Ku bands with the smallest thickness of 0.082 $\lambda_L$ (at lowest operating frequency of the absorption band) as compared to the state-of the-art absorbers. In order to validate the proposed absorber, the equivalent circuit model has also been presented. The equivalent circuit model shows good match with the proposed absorber. The proposed absorber is experimentally verified and the experimental results shows good agreement with the simulated results.

30 November 2014 in Applied Physics A
Verified
Journal Article
Closed access
PDF file
SBSomak Bhattacharyya
Somak Bhattacharyya
SGSaptarshi Ghosh
Saptarshi Ghosh
DCDevkinandan Chaurasiya
Devkinandan Chaurasiya
KSKumar Vaibhav Srivastava
Kumar Vaibhav Srivastava

28 December 2020 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
ASAditi Sharma
Aditi Sharma
SGSaptarshi Ghosh
Saptarshi Ghosh
KSKumar Vaibhav Srivastava
Kumar Vaibhav Srivastava
A polarization-insensitive broadband absorber with a notch band characteristic has been presented for radar cross section reduction applications. The proposed design is a three-layered structure, consisting of metal-printed substrate layers separated by air spacers. The top layer is a resistor-loaded convoluted cross-dipole geometry that results in a wideband absorption. The band-notch response is achieved by careful design of a square loop in the middle layer, and the bottom layer is a complete metal ground. The overall structure exhibits two discrete absorption bands (having absorptivity above 90%) over the frequency ranges of 2.12 to 4.15 GHz and 6.08 to 9.58 GHz, whereas a reflective behaviour is obtained from 4.3 to 5.65 GHz. The proposed geometry has several novel features, such as compact topology (with unit cell size of 0.137 ${\rm{\lambda_{L},\lambda_{L}}}$ being the lowest operating wavelength), low profile, polarization-insensitivity, and wide operating bandwidth of 127.52%, unlike the existing band-notched absorbers. By deriving an equivalent circuit model and several parametric variations, the performance of the proposed absorber has been qualitatively analyzed. A sample prototype has also been fabricated and reasonable agreement among the circuit analysis, simulation response, and measured result is obtained under normal incidence.

3 November 2017 in Radio Science
Verified
Journal Article
Open access
PDF file
SBSomak Bhattacharyya
Somak Bhattacharyya
SGSaptarshi Ghosh
Saptarshi Ghosh
KSKumar Vaibhav Srivastava
Kumar Vaibhav Srivastava
A cross polarization conversion (CPC) structure using metasurface over wide bandwidth has been presented for practical applications in this article. The unit cell of the proposed metasurface is made of metallic patch of single circular split‐ring imprinted on top surface of a metal‐backed single‐layer dielectric substrate. Full width at half maxima bandwidth of polarization conversion ratio (PCR) of 11.12 GHz is realized along with wide bandwidth of 9.92 GHz extending from 6.06 GHz to 15.98 GHz with more than 0.8 PCR magnitude is realized using suitable optimization of the geometrical dimensions. Four distinct PCR peaks are observed at 6.56 GHz, 10.38 GHz, 15.12 GHz, and 16.68 GHz. The polarization conversion phenomena at these four frequencies have been analyzed in the light of electromagnetic resonances. The roles of several geometrical parameters of the design are simultaneously investigated. The proposed structure has been studied under oblique incidence, both for transverse electric and transverse magnetic polarizations. Wideband polarization conversion characteristics up to 45° incident angles have been observed for both cases. A prototype of the proposed metasurface is fabricated, and experimental results are in good agreement with the simulated responses. The proposed structure is ultrathin; ~λ/11.8 with respect to the center frequency of the CPC bandwidth.

17 June 2022 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
KKKahani Kumari
Kahani Kumari
MSMondeep Saikia
Mondeep Saikia
RJRahul Kumar Jaiswal
Rahul Kumar Jaiswal
SMSudha Malik
Sudha Malik
KSKumar Vaibhav Srivastava
Kumar Vaibhav Srivastava
In this letter, a single-layer compact copolarized shorted TM 1/2,0 mode microstrip patch antenna is presented for in-band full-duplex application. Two shorted TM 1/2,0 mode patch antennas, used for transmission and reception purposes, make the structure compact. The wideband behavior of the patch antenna is obtained by fusing the two resonances, one because of the shorted TM 1/2,0 mode radiating patch and the other because of the λ/4 line resonator. To enhance the isolation between the transmitter and receiver antenna, a novel defected ground structure is used. Slots are introduced into the ground plane to create a weak field region for the basic antenna element. The other antenna element (receiver) is located in the weak field region to enhance isolation. Further enhancement in isolation is achieved by introducing a T-shaped metallic strip into the slots. The structure is proposed with the credits of compactness, enhanced bandwidth, colinear polarization, very less fabrication complexity, low profile, and high isolation. The proposed structure is fabricated and measured. The structure experimentally exhibits a bandwidth (≤ −10 dB) of 2.42–2.52 GHz with the isolation of 25 dB, peak isolation of 36 dB, and an average realized gain of 4 dBi in the entire band.