1 August 2020 in Soils and Foundations
1 December 2020 in Journal of Geotechnical and Geoenvironmental Engineering
This technical paper investigates the bearing performance of precast concrete piles embedded within calcareous sands with biogrouting at the pile toe. Loading tests of biogrout-improved and unimproved concrete model piles were conducted to evaluate the performance of biogrout to enhance the toe bearing capacity of precast concrete piles. The total bearing capacity of the precast concrete pile with a biogrouted toe was 4.4 times as large as that without biogrout. A series of index tests were performed using a penetrometer to estimate the spatial distribution of strength of biocemented sands below the pile toe. It was found that the average strength of the biocemented sand below the biogrouted pile toe gradually decreased with increasing vertical distance or lateral distance from the pile toe. The novel application of biocement to treat bearing sands following pile installation represents a promising method to increase pile capacity.
1 January 2023 in Journal of Geotechnical and Geoenvironmental Engineering
The particle-scale shear and tensile strength measurements of microbial-induced calcite precipitation (MICP) treatment have been investigated in this paper. Glass beads were used to represent sand particles. Three particle-scale test setups were developed to measure the tensile, shear, and cyclic shear strength of MICP-treated bonds between glass beads. Sporosarcina pasteurii bacterial cells were introduced to precipitate and form cementation bonds between glass beads. The preliminary particle-scale test (Test setup 1) was designed to measure the shear and tensile strength of bonds precipitated between glass beads mounted on optical fiber sensors with known properties. Shear and tension loads were applied to the bonds by the displacement actuators controlling the movement of movable stages. The improved particle-scale test setup (Test setup 2) was developed using a larger and stable reaction chamber, an automated injecting system, and stiff bending elements (instead of optical fibers) that were connected to glass beads to improve measurements. Deflections of the bending elements were measured to calculate the tensile and shear strength of the bonds using the beam theory. The enhanced particle-scale test setup (Test setup 3) was developed to directly measure the shear and tensile forces generated in bonds using load cells and LVDTs to investigate the monotonic and cyclic response of the bonds. For the tests using Test setup 3, the shear and tensile strengths were 378 and 446 kPa, respectively.
1 November 2023 in Journal of Geotechnical and Geoenvironmental Engineering
1 August 2021 in Journal of Geotechnical and Geoenvironmental Engineering
EICP (enzyme induced carbonate precipitation) and MICP (microbially induced carbonate precipitation) treatments were applied through pervious concrete model piles to cement soil around the piles and enhance soil-pile interaction and pile capacity. The behaviors of the pervious concrete piles treated by EICP and MICP when subjected to axial compression loading were compared with each other and with an untreated pervious concrete pile. These tests were performed on 1/10th-scale model piles in the soil-structure interaction (SSI) testing facility at Lehigh University. The piles and surrounding soil were instrumented with strain gauges, bender elements, in-soil null pressure sensors, and a tactile pressure sheet. The responses of the pervious concrete piles and surrounding soil were compared through analysis of shear wave (S-wave) velocities in the treated and untreated soil zones, load transfer along the piles at the ultimate load condition, soil moisture content, calcium carbonate ( ) content and ammonium ( ) concentration in soil, and the characteristics of the precipitated crystals along the soil-pile interface. In addition, comparisons with consolidated drained (CD) triaxial test results were made among sand without treatment and with EICP and MICP treatments. The results presented in this paper demonstrated that both EICP and MICP treatments can create a cemented soil zone surrounding the pervious concrete pile and improve the pile capacity and load transfer under compression loading.
1 November 2021 in International Journal of Geomechanics
This technical note aims to investigate the effects of biotreatment on the response of a concrete model pile embedded in poorly graded sand through lateral loading tests. The bending moment profiles along pile length were obtained from strain gauges collected during the pile load tests. The pile deflection and soil resistance were derived from a bending moment profile based on beam theory. The ultimate lateral resistance of the pile with biotreatment was 2.6 times as large as that without biotreatment. The bending moment for the pile in biotreated soil is significantly smaller than that for the pile in untreated soil due to the reduction in curvature. The spatial distribution of calcium carbonate generated during the biotreatment was obtained from 1,800 sand samples, which was also validated by the scanning electron microscope images. Biotreatment of sand surrounding a pile is demonstrated to be a promising measure to effectively improve the lateral capacity of the pile.