The suppression of asymmetric mode competition is one of the basic conditions for proper operation of high-power microwave (HPM) sources. This article presents experimental results on mode competition in a relativistic klystron oscillator (RKO) operating under low magnetic field conditions. A competing mode with a frequency of 6.27 GHz is observed in the experiments and is in good agreement with the particle-in-cell (PIC) simulation results. It is determined that the competing mode was the TM211 mode. The asymmetric mode competition mechanism is found by theoretical and simulation studies to be that the asymmetric mode TM211 mode and the symmetric mode TM011 mode of the bunching cavity have the similar external quality factor ${Q} _{\text {e}}$ . Upon modifying the bunching cavity of the RKO, ${Q} _{\text {e}}$ increases from 1036 to 3421 for the symmetric mode and decreases from 1041 to 611 for the asymmetric mode, while other physical properties are less changed. The efficacy of this technique in suppressing asymmetric mode competition has been substantiated through both PIC simulations and experimental results.
An X-band high-power microwave (HPM) oscillator packaged with permanent magnets is proposed. The oscillator employs a radially non-uniform modulation cavity structure to enhance the modulation depth of the electron beam, thereby improving the conversion efficiency of the device. Verified by particle-in-cell simulation, the device achieves an HPM output at X-band with a frequency of 9.38 GHz and power of 3.1 GW, corresponding to a power efficiency of 44.5%, under the conditions of a permanent magnet field of 0.4 T, a diode voltage of 600 kV, and a beam current of 11.6 kA.
To achieve compactness and miniaturization for high-power microwave devices, this paper proposes an X-band permanent magnet-packaged coaxial relativistic klystron oscillator (RKO) with a novel diode structure featuring a stair-step cathode. First, by adopting a large-radius anode structure, the emission of beam currents from the side of the cathode surface is diminished, thereby reducing the proportion of the backward current in the beam current from 10% to 7%. Second, a stair-step cathode is used to inhibit the return flow of electron beams from striking the anode and generating plasma. Concurrently, a radially non-uniform coaxial resonant cavity structure is employed to enhance the fundamental wave modulation depth of the electron beam and improve the beam–wave interaction's efficiency. The experimental results show that the novel device outputs a microwave with a frequency of 9.46 GHz and a pulse width of 55 ns. It generates a power output of 1.5 GW with an efficiency of approximately 30.5%, in the case in which the diode voltage is 505 kV, the beam current is 9.7 kA, and the guiding magnetic flux density is 0.4 T. This novel structure surpasses traditional diode configurations by enhancing the beam-to-wave conversion efficiency by roughly 10%, thereby offering substantial support for the compactness and miniaturization of RKO.
In the X-band relativistic klystron oscillator, mode hopping phenomena in the output microwave caused by low-order asymmetric TE11 mode competition are observed. Based on theoretical and simulation analyses of the electron conductance and external quality factors of the main mode TM013 and the TM113 mode, it is found that the electronic conductivity of both the main mode and the low-order TM113 mode is negative, and their external quality factors are close, which is the cause of the asymmetric mode competition. In particle simulations, by altering a pre-reflection cavity and altering the position of the cathode block, the reflection coefficient of the main mode TM013 is increased, thereby enhancing the resonance characteristics of the main mode and effectively suppressing the asymmetric mode competition. Simulation and experimental results indicate that by adjusting the depth of the pre-cavity and reducing the distance of the cathode block, the low-order asymmetric TE11 mode is effectively suppressed, enhancing the stability of the output microwave.