Peng Zhang

Peng Zhang

Auto-generated profile, based on publicly available information

Peng Zhang

National University of Defense Technology

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 October 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
PZPeng Zhang
Peng Zhang
XGXingjun Ge
Xingjun Ge
FDFangchao Dang
Fangchao Dang
HCHang Chi
Hang Chi
HYHanwu Yang
Hanwu Yang
JHJuntao He
Juntao He
Prolonging the microwave pulsewidth is an important research direction to improve high-power microwaves’ energy and average power level. In this article, a sub-microsecond compact $\textit{L}$ -band relativistic Cherenkov oscillator (RCO) is studied. The device adopts a coaxial slow wave structure to reduce the radial size and a coaxial collector structure to improve the resonance characteristics of the slow wave structure to reduce the axial size. In particular, a coaxial outer corrugated slow wave structure is used instead of the coaxial double-corrugated slow wave structure to increase the power handling capacity (PHC) of the slow wave structure and reduce its surface electric field. Moreover, the collector structure has been improved to suppress the effects of plasma expansion. In the experiment, the device obtained a high-power microwave output with a microwave frequency of 1.496 GHz, a power of 2.0 GW, a pulsewidth of 317 ns (single pulse energy of 634 J), and a power conversion efficiency of 32%. The pulsewidth and the single pulse energy are the highest levels reported for the RCO.

9 March 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
PZPeng Zhang
Peng Zhang
XGXingjun Ge
Xingjun Ge
FDFangchao Dang
Fangchao Dang
HCHang Chi
Hang Chi
TSTing Shu
Ting Shu
JHJuntao He
Juntao He
The phenomenon of pulse shortening caused by asymmetrical mode competition is observed in the $\textit{X}$ -band relativistic klystron oscillator (RKO). Based on theoretical and simulation analysis of the electronic conductivity, external quality factor, and resonance characteristics of the TM $_{\text{013}}$ mode and asymmetric TM $_{\text{512}}$ mode, the reasons for the excitation of the asymmetric mode are obtained. First, the asymmetric TM $_{\text{512}}$ mode has negative electronic conductors and great external quality factors in the buncher, which provides a starting condition. Second, asymmetric TM $_{\text{512}}$ mode has higher resonance in the extraction structure to provide growth conditions. Therefore, strong positive feedback establishes between the buncher and the extraction structure, which makes the asymmetrical TM $_{\text{512}}$ mode effectively excited. Finally, by optimizing the radius of the extraction structure, the resonance characteristics of the TM $_{\text{013}}$ mode are enhanced, while the asymmetrical mode is weakened. So the TM $_{\text{013}}$ mode establishes stronger positive feedback between the buncher and the extraction structure, effectively suppressing the excitation of the asymmetric mode. The simulation and experimental results show that this method can effectively suppress the excitation of the asymmetrical mode, and solve the problem of pulse shortening.

1 April 2025 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
RDRujin Deng
Rujin Deng
XGXingjun Ge
Xingjun Ge
FDFangchao Dang
Fangchao Dang
PZPeng Zhang
Peng Zhang
FYFuxiang Yang
Fuxiang Yang
BQBaoliang Qian
Baoliang Qian
In order to reduce the volume and energy consumption of high-power microwave (HPM) systems, HPM sources with low guiding magnetic fields have become one of the most important trends. However, the beam-wave conversion efficiency of such devices is typically low due to the divergence of the electron beam, which lacks the constraint of a high magnetic field. Here, we investigate a coaxial dual-mode relativistic Cherenkov oscillator (RCO) that exhibits efficient beam-wave interaction at a low guiding magnetic field. On the one hand, the space charge effect of electrons can be reduced by increasing the radius of the device; on the other hand, dual-mode operation can be achieved for efficient beam-wave conversion, while the competition of higher order modes from large radii can be avoided by introducing a coaxial inner conductor to the slow wave structure (SWS). In particle simulations, a guiding magnetic field of only 0.33 T has been demonstrated to confine the electron beam, resulting in an output microwave power of 1.98 GW and a beam-wave conversion efficiency of approximately 43% when the diode voltage and diode current are 510 kV and 9 kA, respectively. Moreover, preliminary validation experiments were conducted, wherein microwaves with a power of 1.71 GW were generated with a beam-wave conversion efficiency of 36%. The experimental results obtained under low magnetic fields provide a high degree of confidence that the size and weight of HPM systems utilizing this device will be significantly reduced.

10 October 2022 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
PZPeng Zhang
Peng Zhang
TSTing Shu
Ting Shu
FDFangchao Dang
Fangchao Dang
XGXingjun Ge
Xingjun Ge
LSLili Song
Lili Song
JHJuntao He
Juntao He
An $X$ -band coaxial relativistic klystron oscillator (RKO) is proposed to improve the beam–wave interaction efficiency in the low magnetic field and low impedance. The device adopts a four-gap modulation cavity to increase the fundamental current, and a three-gap extraction cavity is used to improve the microwave extraction capability. The simulation results show that when the guiding magnetic field and impedance are 0.55 T and 40 $\Omega $ , respectively, the output microwave power is 3.65 GW and the corresponding efficiency is 40%. Subsequently, a preliminary experimental investigation was carried out to verify the feasibility of this technical route. In the experiment, the output microwave with a power of 2.3 GW, a pulsewidth of 69 ns, and a center frequency of 9.39 GHz was generated when the magnetic field and impedance are 0.62 T and 41 $\Omega $ , respectively. Moreover, the explosive electron emission model of the extraction cavity is established, and the simulation results show that the explosive electron emission generated by the radio frequency (RF) breakdown at the extraction cavity is the main reason for the difference between the experimental and simulated microwave power.

1 June 2023 in IEEE Access
Verified
Journal Article
Open access
LXLiang Xu
Liang Xu
XGXingjun Ge
Xingjun Ge
QZQiang Zhang
Qiang Zhang
FDFangchao Dang
Fangchao Dang
PZPeng Zhang
Peng Zhang
CYChengwei Yuan
Chengwei Yuan
A beam-steerable wideband reflectarray antenna (WRA) for C -band high-power microwave (HPM) application is presented in this paper. The C -band WRA is made up of a multimode conical horn antenna with high power handling capacity (PHC), 25×25 special designed antenna elements, a metal frame and a dielectric plate as radome. In our previous work, it has been verified that a wideband prototype using this antenna element has a relative bandwidth of 50% (3.3-5.5 GHz) and its beam scanning range reaches ± 60° in low power experiments. In this paper, combined with the equivalent circuit model, the wideband and high PHC property of the WRA element is further explained. To demonstrate the excellent performance of the proposed element in HPM applications, we combined the C -band WRA (which is different from the previous wideband prototype after redesigning) with a well-designed narrowband HPM source operating at 4.3 GHz and constructed a matching HPM experimental platform. The C -band WRA works at 4.1-4.5 GHz, and the results of low power experiments indicate that it can maintain good performance during beam scanning. Its sidelobe level and cross-polarization level are always less than -15 dB and –22 dB, respectively, while its maximum aperture efficiency reached 68.99% (the corresponding antenna gain is 28.07 dB at 4.3 GHz). On the other hand, the PHC of the WRA element reaches 3.82 GW/m 2 while the C -band WRA reaches 1.24 GW in simulation. HPM verification experiments have been carried out, and the experimental results show that the PHC of the fabricated prototype exceeded the expectation, which proves that the WRA has broad application prospects in HPM fields.

20 September 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
RDRujin Deng
Rujin Deng
ZLZhimin Li
Zhimin Li
XGXingjun Ge
Xingjun Ge
FDFangchao Dang
Fangchao Dang
PZPeng Zhang
Peng Zhang
BQBaoliang Qian
Baoliang Qian
The suppression of asymmetric mode competition is one of the basic conditions for proper operation of high-power microwave (HPM) sources. This article presents experimental results on mode competition in a relativistic klystron oscillator (RKO) operating under low magnetic field conditions. A competing mode with a frequency of 6.27 GHz is observed in the experiments and is in good agreement with the particle-in-cell (PIC) simulation results. It is determined that the competing mode was the TM211 mode. The asymmetric mode competition mechanism is found by theoretical and simulation studies to be that the asymmetric mode TM211 mode and the symmetric mode TM011 mode of the bunching cavity have the similar external quality factor ${Q} _{\text {e}}$ . Upon modifying the bunching cavity of the RKO, ${Q} _{\text {e}}$ increases from 1036 to 3421 for the symmetric mode and decreases from 1041 to 611 for the asymmetric mode, while other physical properties are less changed. The efficacy of this technique in suppressing asymmetric mode competition has been substantiated through both PIC simulations and experimental results.