Spin tunnel junctions with tunneling magnetoresistance of resistance-area product of and junction area between 6 and were fabricated. The barrier height is and the barrier thickness is Large tunneling magnetoresistance (TMR) values are obtained by vacuum anneal (at temperatures from 100 to 240 °C for over 5 h) of junctions prepared with as-deposited TMR of and an as-deposited resistance-area product of Two regimes occur during anneal. The first one occurs for anneals up to 200 °C where TMR and junction resistance increase, but the barrier parameters are unaltered. The second occurs above 200 °C, where TMR increases faster, together with an increase in barrier height. At 240 °C, TMR starts to decrease. Rutherford backscattering analysis indicates an asymmetry in the oxygen distribution in the as-deposited barrier. The oxygen distribution becomes homogeneous for anneals above 150 °C.
1 January 1997 in Journal of the European Ceramic Society
Spin tunnel junctions /CoFe/MnIr) were fabricated with tunneling magnetoresistance (TMR) of 39%–41% after anneal at 300 C, decreasing to 4%–6% after anneal at 410 C. Junction resistance decreases from (0.8–1.6) to (0.5–0.8) M during anneal. The pinned-layer moment decreases by 44% after anneal at 435 °C, but the free-layer moment does not change. The current–voltage characteristics change significantly and become asymmetric above 300 C. Rutherford backscattering analysis (RBS) shows that above 300 C, strong interdiffusion starts at the CoFe/MnIr interface with Mn moving into CoFe, causing the electrode moment to decrease. Mn eventually reaches the /CoFe interface contributing to the TMR decrease. RBS analysis of a separate /CoFe structure shows only minor structural changes at the interfaces after anneal at 435 C, possibly leading to a second mechanism for the loss of interface polarization and TMR.
Arsenic has been reported in the literature as one of the few -type dopants in the technologically promising II-VI semiconductor ZnO. However, there is an ongoing debate whether the -type character is due to As simply replacing O atoms or to the formation of more complicated defect complexes, possibly involving As on Zn sites. We have determined the lattice location of implanted As in ZnO by means of conversion-electron emission channeling from radioactive . In contrast to what one might expect from its nature as a group V element, we find that As does not occupy substitutional O sites but in its large majority substitutional Zn sites. Arsenic in ZnO (and probably also in GaN) is thus an interesting example for an impurity in a semiconductor where the major impurity lattice site is determined by atomic size and electronegativity rather than its position in the periodic system.
Bottom-pinned spin valves with enhanced specular scattering were fabricated, showing magnetoresistance (MR) values up to 13.6%, lower sheet resistance and higher Two nano-oxide layers (NOL) are grown on both sides of the CoFe/Cu/CoFe spin valve structure by natural oxidation or remote plasma oxidation of the starting CoFe layer. Maximum MR enhancement is obtained after just 1 min plasma oxidation. Rutherford backscattering analysis shows that a 15±2 Å oxide layer grows at the expense of the initial (prior to oxidation) CoFe layer, with ∼12% reduction of the initial 40 Å CoFe thickness. X-ray reflectometry indicates that Kiessig fringes become better defined after NOL growth, indicating smoother inner interfaces, in agreement with the observed decrease of the spin valve ferromagnetic Néel coupling.