A generic parameter estimation algorithm was developed for the simultaneous extraction of multiple parameters from experimental or field observations. The basis of the method lies in the minimization of the variation between model predictions and observations via the iterative numerical determination of the functional minima of the model with respect to the parameters being determined. A multivariable Newton technique, and derivatives thereof, are used for this purpose. By relying on numerical differentiation in the iterative process, the technique is not limited by the model complexity, solution methodology, or scale of its domain. Model parameters have been estimated successfully for analytical and numerical solutions to dispersive and advective‐dispersive particle transport model equations. The effect of sampling or measurement error and initial parameter estimates on algorithm performance has been evaluated. This approach has been successfully applied to determine data requirements and constraints (qu...
6 August 2014 in Environmental Monitoring and Assessment
Dispersants are one class of chemical response agents currently approved for use on offshore oil spills. However, questions persist regarding potential environmental risks of nearshore dispersant applications. To address these questions, the relative toxicity of weathered crude oil, dispersant, and weathered crude oil plus dispersant were compared. This study included one luminescent marine bacteria (Vibrio fisheri), two marine vertebrate (Cyprinodon variegatus and Menidia beryllina), and one invertebrate test species (Mysidopsis bahia). Both the vertebrate and invertebrate species were tested under spiked (short episodic) exposure regimes and 96-hour continuous exposure regimes using protocols developed by the Chemical Response to Oil Spills: Ecological Effects Research Forum (CROSERF) and U.S. Environmental Protection Agency (EPA), respectively. Toxicity to the marine bacteria was evaluated after a 15-minute exposure using the Microbics Microtox® system. Results showed no significant variance between the relative toxicity of solutions prepared with weathered crude oil only and weathered crude oil plus dispersant when evaluated with the vertebrate and invertebrate test species. However, oil only solutions were shown to be significantly more toxic to Vibrio fisheri than oil plus dispersant solutions. Data also indicated that constant exposures were significantly more toxic than declining exposures, which is generally consistent with time weighted exposure response evaluations. Microtox® data was comparable to both vertebrate and invertebrate test results suggesting that the method is suitable for toxicity field screening.
Interest has grown for using acoustic Doppler current profilers (ADCPs) to measure suspended solids concentrations (SSC) in aqueous environments because of the ability to make simultaneous unobtrusive long-term multipoint measurements with high spatial and temporal resolutions. The acoustic backscatter intensity (ABS) measured by ADCPs is a function of the particle size distribution, concentration, and incident acoustic signal strength and thus provides the theoretical basis for measuring SSC. The applicability of using ABS from a 2400-kHz ADCP to estimate SSC in units of volume concentration over variable particle size distributions is evaluated in a controlled laboratory study. Results from this research show a log-linear relationship between ABS and volume concentrations over variable size distributions. Volume concentrations predicted from the sonar equation using measured ABS and empirically derived response coefficients compare well with the measured concentrations over the full range of concentrations and particle size distributions tested. The ABS response is shown to be linear with the theoretical Rayleigh scattering target strength, calculated from the empirical particle size distribution, and thus explains the observed linearity over a variable particle size distribution. These results indicate that ABS can be used to provide meaningful volume concentration estimates for characteristically variable colloidal suspensions.
1 April 1997 in International Oil Spill Conference Proceedings
Corpus Christi Bay (TX, USA) is a shallow wind-driven bay which experiences hypoxia (dissolved oxygen<2 mg/L) during the summer months in the southeast region of the bay. We have developed and installed real-time monitoring systems in the bay to measure various water quality, meteorological and hydrodynamic parameters. These systems can aid in determining the extent and frequency of hypoxic events in this energetic bay. A three-dimensional mechanistic dissolved oxygen model has been developed in this study to investigate the key processes that induce hypoxia in Corpus Christi (CC) Bay. This model includes variable advection and dispersion coefficients so that it can be driven by real-time monitoring hydrodynamic data. The results from model simulations indicate that hypoxia may occur at the lower depths of the bay when both stratification and higher biological activity conditions exist. The water column in the south-east part of the bay becomes stratified during calm wind conditions when there is inflow of hyper-saline water from the neighboring Laguna Madre waterbody. This condition, when combined with higher biological activity during the summer months, induces hypoxia at the lower depths of the bay. The simulation results also point out that physical transport processes have more pronounced effect on the DO distribution within the water column than the effects of biological activity. Therefore, it is necessary to develop suitable sampling strategies that will measure hydrodynamic data at greater spatial and temporal resolution. The integration of this data with our developed model will provide a useful tool to the stakeholders to assess the water quality of the bay in real time.