1 March 2023 in Physics of Fluids
The discontinuous Galerkin (DG) method has been widely adopted due to its excellent properties. However, the problem of designing a class of high-order limiter that takes into account accuracy, compactness, efficiency, and robustness has long been an open question in simulating compressible flow with strong discontinuities. In this paper, a high-order multi-resolution weighted essentially non-oscillatory (MR-WENO) limiter is designed for the DG method on a parallel adaptive Cartesian grid, based directly on the weak solution to a polynomial obtained by the DG method. It can gradually be reduced to first-order accuracy in the vicinity of discontinuities while maintaining the excellent features of the DG method. Thus, it essentially has non-oscillatory characteristics in non-smooth regions with respect to the adaptive Cartesian grids. An improved shock detection technique is adopted as an indicator to identify troubled cells, which forms a high-order limiting procedure. A high-order MR-WENO limiter is used for both two- and three-dimensional cases to reconstruct different degrees of freedom on adaptive Cartesian grids. If the mesh is refined or coarsened, the details of the implementation algorithm are presented to determine how the hanging nodes are modulated and how the numerical solutions are redefined on such adaptive Cartesian grids. The parallelization of this method can be achieved by linking to the octree-based adaptive mesh refinement library called p4est. Finally, the low dissipation, shock capture ability, and load balancing of the high-order DG method with an MR-WENO limiter may enhance the resolutions of nearby strong discontinuities in adaptive Cartesian grids.
1 June 2023 in Communications in Computational Physics
In this paper, a new multi-resolution weighted essentially non-oscillatory (MR-WENO) limiter for high-order local discontinuous Galerkin (LDG) method is designed for solving Navier-Stokes equations on triangular meshes. This MR-WENO limiter is a new extension of the finite volume MR-WENO schemes. Such new limiter uses information of the LDG solution essentially only within the troubled cell itself, to build a sequence of hierarchical $L^2$ projection polynomials from zeroth degree to the highest degree of the LDG method. As an example, a third-order LDG method with associated same order MR-WENO limiter has been developed in this paper, which could maintain the original order of accuracy in smooth regions and could simultaneously suppress spurious oscillations near strong shocks or contact discontinuities. The linear weights of such new MR-WENO limiter can be any positive numbers on condition that their summation is one. This is the first time that a series of different degree polynomials within the troubled cell are applied in a WENO-type fashion to modify the freedom of degrees of the LDG solutions in the troubled cell. This MR-WENO limiter is very simple to construct, and can be easily implemented to arbitrary high-order accuracy and in higher dimensions on unstructured meshes. Such spatial reconstruction methodology improves the robustness in the numerical simulation on the same compact spatial stencil of the original LDG methods on triangular meshes. Some classical viscous examples are given to show the good performance of this third-order LDG method with associated MR-WENO limiter. Local discontinuous Galerkin method, multi-resolution WENO limiter, triangular meshes, Navier-Stokes equations. 65M60, 35L65 COPYRIGHT: © Global Science Press
1 November 2024 in Physics of Fluids
Adaptive mesh refinement (AMR) technology and high-order methods are important means to improve the quality of simulation results and have been hotspots in the computational fluid dynamics community. In this paper, high-order discontinuous Galerkin (DG) and direct DG (DDG) finite element methods are developed based on a parallel adaptive Cartesian grid to simulate compressible flow. On the one hand, a high-order multi-resolution weighted essentially nonoscillatory limiter is proposed for DG and DDG methods. This limiter can enhance the stability of DG/DDG methods for compressible flows dominated by shock waves. It is also compact, making it suitable for the implementation of AMR with frequent refinement/coarsening. On the other hand, a coupling method of DG and immersed boundary method is proposed to simulate flow around objects. Due to the compactness of DG, the physical quantities of image points can be directly obtained through the DG/DDG polynomial of the corresponding cells. It avoids the wide interpolation stencil of traditional IBM and makes it more suitable for the parallel adaptive Cartesian grid framework in this paper. Finally, the performance of the proposed method is verified through typical two- and three-dimensional cases. The results indicate that the method proposed in this paper has low numerical dissipation in smooth areas and can effectively handle compressible flow dominated by discontinuities. Moreover, for transonic flow over a sphere, the error of results between the proposed method and direct numerical simulation is within 1%, fully validating the accuracy of the method presented in this paper.
1 November 2022 in Physics of Fluids
In this paper, two unequal-sized weighted essentially non-oscillatory (US-WENO) schemes are proposed for solving hyperbolic conservation laws. First, an alternative US-WENO (AUS-WENO) scheme based directly on the values of conserved variables at the grid points is designed. This scheme can inherit all the advantages of the original US-WENO scheme [J. Zhu and J. Qiu, “A new fifth order finite difference WENO scheme for solving hyperbolic conservation laws,” J. Comput. Phys. 318, 110–121 (2016).], such as the arbitrariness of the linear weights. Moreover, this presented AUS-WENO scheme enables any monotone fluxes applicable to this framework, whereas the original US-WENO scheme is only suitable for the more dissipative smooth flux splitting. Therefore, the method in this paper has a smaller L1 and numerical errors than the original scheme under the same conditions. Second, in order to further improve the computational efficiency of the above AUS-WENO scheme, a hybrid AUS-WENO scheme is proposed by combining a hybrid strategy. This strategy identifies the discontinuous regions directly based on the extreme points of the reconstruction polynomial corresponding to the five-point stencil, which brings the important advantage that it does not depend on the specific problem and does not contain any artificial adjustable parameters. Finally, the performance of the above two AUS-WENO schemes in terms of low dissipation, shock capture capability, discontinuity detection capability, and computational efficiency is verified by some benchmark one- and two-dimensional numerical examples.
1 November 2024 in Physics of Fluids
The coexistence and interaction of shock waves and turbulence occur in various applications, such as inertial confinement fusion, scramjet propulsion, and supernova explosions. The supersonic Taylor–Green vortex (TGV) flow is a benchmark example for studying shock/turbulence interaction problems. In this paper, the performance of the interpolation-based weighted essentially non-oscillatory (WENO) schemes for compressible TGV simulation was evaluated, rather than the existing reconstruction-based approach. First, based on the popular unequal-sized WENO (US-WENO) scheme, we developed an interpolation-based US-WENO scheme for simulating three-dimensional inviscid/viscous TGV problems over the Mach number range of 0.1–2.5. Second, a discontinuous sensor based on extremum properties (EPs) of the polynomial was designed, and a corresponding hybrid interpolation-based US-WENO scheme was developed. This EP-based sensor does not contain empirical parameters and can simulate the supersonic TGV problems well while significantly improving the computational efficiency of the original US-WENO scheme. Numerical experiments show that the interpolation-based WENO scheme has smaller numerical dissipation and better performance for compressible TGV problems than the reconstruction-based WENO scheme. However, its computational cost is slightly higher, while the hybrid US-WENO scheme can perform better in terms of both computational accuracy and efficiency.
1 January 2025 in Physics of Fluids
In this paper, a high Reynolds number compressible flow simulation method based on the immersed boundary method (IBM) is developed on the adaptive Cartesian grids to address two problems: one is the ability of large-scale Cartesian grid generation, and the other is the resolution of thin shear layers. For the former, an efficient automatic parallel generation method of adaptive Cartesian grids is proposed based on the k-d tree theory. The method has good parallel scalability and computational efficiency, e.g., the generation of 1.41 × 109 cells by 2048 cores takes only 0.40 min. For the latter, an IBM-wall function coupling method is designed to simulate geometrical configurations with high Reynolds numbers in the parallel framework. Numerical experiments show that the presented method can yield results consistent with the use of body-fitted grids. In conclusion, the presented method can realize a fully automatic simulation of high Reynolds number compressible flows, significantly reducing the labor cost in the computational fluid dynamics process, and can improve the accuracy and efficiency of engineering applications.