Paul Werginz

Paul Werginz

Auto-generated profile, based on publicly available information

Paul Werginz

Institute of Biomedical Electronics TU Wien Vienna 1040 Austria

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2015 in Vision Research
Verified
Journal Article
Open access
PWP. Werginz
P. Werginz
HBH. Benav
H. Benav
EZE. Zrenner
E. Zrenner
FRF. Rattay
F. Rattay
Retinal implants allowing blind people suffering from diseases like retinitis pigmentosa and macular degeneration to regain rudimentary vision are struggling with several obstacles. One of the main problems during external electric stimulation is the co-activation of the ON and OFF pathways which results in mutual impairment. In this study the response of ON and OFF cone retinal bipolar cells during extracellular electric stimulation from the subretinal space was examined. To gain deeper insight into the behavior of these cells sustained L-type and transient T-type calcium channels were integrated in the synaptic terminals of reconstructed 3D morphologies of ON and OFF cone bipolar cells. Intracellular calcium concentration in the synaptic regions of the model neurons was investigated as well since calcium influx is a crucial parameter for cell-to-cell activity between bipolar cells and retinal ganglion cells. It was shown that monophasic stimulation results in significant different calcium concentrations in the synaptic terminals of ON and OFF bipolar cells. Intracellular calcium increased to values up to fourfold higher in the OFF bipolar model neuron in comparison to the ON bipolar cell. Furthermore, geometric properties strongly influence the activation of bipolar cells. Monophasic, biphasic, single and repetitive pulses with similar lengths, amplitudes and polarities were applied to the two model neurons.

6 March 2018 in Journal of Neural Engineering
Verified
Journal Article
Open access
PDF file
Maesoon ImMaesoon Im
Maesoon Im
PWPaul Werginz
Paul Werginz
SFShelley I Fried
Shelley I Fried
To improve the quality of artificial vision that arises from retinal prostheses, it is important to bring electrically-elicited neural activity more in line with the physiological signaling patterns that arise normally in the healthy retina. Our previous study reported that indirect activation produces a closer match to physiological responses in ON retinal ganglion cells (RGCs) than in OFF cells (Im and Fried 2015 J. Physiol. 593 3677-96). This suggests that a preferential activation of ON RGCs would shape the overall retinal response closer to natural signaling. Recently, we found that changes to the rate at which stimulation was delivered could bias responses towards a stronger ON component (Im and Fried 2016a J. Neural Eng. 13 025002), raising the possibility that changes to other stimulus parameters can similarly bias towards stronger ON responses. Here, we explore the effects of changing stimulus duration on the responses in ON and OFF types of brisk transient (BT) and brisk sustained (BS) RGCs. We used cell-attached patch clamp to record RGC spiking in the isolated rabbit retina. Targeted RGCs were first classified as ON or OFF type by their light responses, and further sub-classified as BT or BS types by their responses to both light and electric stimuli. Spiking in targeted RGCs was recorded in response to electric pulses with durations varying from 5 to100 ms. Stimulus amplitude was adjusted at each duration to hold total charge constant for all experiments. We found that varying stimulus durations modulated responses differentially for ON versus OFF cells: in ON cells, spike counts decreased significantly with increasing stimulus duration while in OFF cells the changes were more modest. The maximum ratio of ON versus OFF responses occurred at a duration of ~10 ms. The difference in response strength for BT versus BS cells was much larger in ON cells than in OFF cells. The stimulation rates preferred by subjects during clinical trials are similar to the rates that maximize the ON/OFF response ratio in in vitro testing (Im and Fried 2016a J. Neural Eng. 13 025002). Here, we determine the stimulus duration that produces the strongest bias towards ON responses and speculate that it will further enhance clinical effectiveness.


27 September 2019 in Frontiers in Cellular Neuroscience
Verified
Journal Article
Open access
PDF file
VRVineeth Raghuram
Vineeth Raghuram
PWPaul Werginz
Paul Werginz
SFShelley I. Fried
Shelley I. Fried
The anatomical properties of the axon initial segment (AIS) are tailored in certain types of CNS neurons to help optimize different aspects of neuronal function. Here, we questioned whether the AISs of retinal ganglion cells (RGC) were similarly customized, and if so, whether they supported specific RGC functions. To explore this, we measured the AIS properties in alpha sustained RGCs (α S RGCs) of mouse; α S RGCs sizes vary systematically along the nasal temporal axis of the retina, making these cells an attractive population with which to study potential correlations between AIS properties and cell size. Measurements of AIS length as well as distance from the soma revealed that both were scaled to cell size, i.e., cells with large dendritic fields had long AISs that were relatively far from the soma. Within the AIS, the percentage of Nav1.6 voltage-gated sodium channels remained highly consistent, regardless of cell size or other AIS properties. Although ON RGCs were slightly larger than OFF cells at any given location of the retina, the level of scaling and relative distribution of voltage-gated sodium channels were highly similar. Computational modeling revealed that AIS scaling influenced spiking thresholds, spike rate as well as the kinetics of individual action potentials, Interestingly, the effect of individual features of the AIS varied for different neuronal functions, e.g., AIS length had a larger effect on the efficacy by which the AIS initiated spike triggered the somatic spike than it did on repetitive spiking. The polarity of the effect varied for different properties, i.e., increases to soma size increased spike threshold while increases to AIS length decreased threshold. Thus, variations in the relative level of scaling for individual components could fine tune threshold or other neuronal functions. Light responses were highly consistent across the full range of cell sizes suggesting that scaling may post-synaptically shape response stability, e.g., in addition to several well-known pre-synaptic contributors.

27 August 2020 in Journal of Neural Engineering
Verified
Journal Article
Open access
PWPaul Werginz
Paul Werginz
VRVineeth Raghuram
Vineeth Raghuram
SFShelley I Fried
Shelley I Fried
Retinal prostheses strive to restore vison to patients that are blind from retinal degeneration by electrically stimulating surviving retinal ganglion cells (RGCs). The quality of elicited percepts remains limited however and it is desirable to develop improved stimulation strategies. Here, we examine how the anatomical and biophysical properties of RGCs influence activation thresholds, including the effects of variations found naturally. Detailed reconstructions were made of a large number of mouse α RGCs and were used to create an array of model cells; the models were used to study the effects of individual anatomical features on activation threshold to electric stimulation. Stimulation was delivered epiretinally from a point-source or disk electrode and consisted of monophasic or biphasic rectangular pulses. Modeling results show that the region of minimum threshold always is within the axon initial segment (AIS). The properties of this region as well as the absolute value of the minimum threshold are dependent on the length of the AIS as well as on the relative composition of sodium channels within the AIS. Other morphological features, including cell size, dendritic field size and the distance between the AIS and the soma had only a minimal influence on thresholds. Introducing even a small number of low-threshold Nav1.6 channels into the AIS was sufficient to lower minimum thresholds substantially although further increases in Nav1.6 had diminishing effects. The distance between the AIS and the electrode affects threshold levels while alignment of the electrode with the axon or dendritic parts of the RGC can result in lower thresholds, even if the distance to the cell remains the same. Intrinsic morphological features can influence activation thresholds with the AIS having the strongest influence. However, the combined influence remains limited and may not be large enough to allow for selective activation between different RGC types.

1 April 2022 in Journal of Neural Engineering
Verified
Journal Article
Open access
AFAndreas Fellner
Andreas Fellner
AHAmirreza Heshmat
Amirreza Heshmat
PWPaul Werginz
Paul Werginz
FRFrank Rattay
Frank Rattay
Objective. Increasing complexity in extracellular stimulation experiments and neural implant design also requires realistic computer simulations capable of modeling the neural activity of nerve cells under the influence of an electrical stimulus. Classical model approaches are often based on simplifications, are not able to correctly calculate the electric field generated by complex electrode designs, and do not consider electrical effects of the cell on its surrounding. A more accurate approach is the finite element method (FEM), which provides necessary techniques to solve the Poisson equation for complex geometries under consideration of electrical tissue properties. Especially in situations where neurons experience large and non-symmetric extracellular potential gradients, a FEM solution that implements the cell membrane model can improve the computer simulation results. To investigate the response of neurons in an electric field generated by complex electrode designs, a FEM framework for extracellular stimulation was developed in COMSOL. Approach. Methods to implement morphologically- and biophysically-detailed neurons including active Hodgkin-Huxley (HH) cell membrane dynamics as well as the stimulation setup are described in detail. Covered methods are (a) development of cell and electrode geometries including meshing strategies, (b) assignment of physics for the conducting spaces and the realization of active electrodes, (c) implementation of the HH model, and (d) coupling of the physics to get a fully described model. Main results. Several implementation examples are briefly presented: (a) a full FEM implementation of a HH model cell stimulated with a honeycomb electrode, (b) the electric field of a cochlear electrode placed inside the cochlea, and (c) a proof of concept implementation of a detailed double-cable cell membrane model for myelinated nerve fibers. Significance. The presented concepts and methods provide basic and advanced techniques to realize a full FEM framework for innovative studies of neural excitation in response to extracellular stimulation.