Renli Liang

Renli Liang

Auto-generated profile, based on publicly available information

Renli Liang

Information Technology Research Institute, Shenzhen Institute and Information Technology, Shenzhen, China

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2018 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
RLRenli Liang
Renli Liang
JDJiangnan Dai
Jiangnan Dai
LXLinlin Xu
Linlin Xu
JHJu He
Ju He
SWShuai Wang
Shuai Wang
CCChangqing Chen
Changqing Chen
To improve the light extraction efficiency (LEE) of AlGaN-based deep ultraviolet LEDs (DUV-LEDs) by simple and effective method, this has greatly attracted ever-growing attention in DUV-LEDs field. Here, nanolens arrays (NLAs) fabricated by nanophotolithography and wet-etched technique is proposed to improve the LEE of DUV-LEDs, and its theoretical feasibility is verified by the Monte Carlo Ray-Trace method and finite element analysis which show an obvious improvement of light and electric field distribution benefit from NLAs structure. By controlling the time of wet etching, the effect of the uniform patterns of NLAs with adjustable morphology on the LEE of DUV-LEDs is systematically studied. Compared with the sandwiched flat lens, experimental results show that the obviously enhancements of the light output power are achieved by using the proposed NLAs to be 13.0%, 21.1%, 24.7%, 13.0%, and 11.5%, respectively, corresponding to their radius of 325, 340, 350, 360, and 400 nm, under the driving current of 300 mA. Therefore, the highest light output power of DUV-LEDs is used the optimized NLAs with radius of 350 nm, and its emission angle also shows the largest improvement of ~14°, suggesting the best LEE.

28 December 2016 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
RLRenli Liang
Renli Liang
FWFeng Wu
Feng Wu
SWShuai Wang
Shuai Wang
QCQian Chen
Qian Chen
JDJiangnan Dai
Jiangnan Dai
CCChangqing Chen
Changqing Chen
This paper investigated the optical and thermal performance of the nitride-based ultraviolet light-emitting diodes fabricated by the eutectic flip-chip method. A new packaging structure was proposed by introducing a thin encapsulation layer doped with 0.4 wt% AlN nanoparticles (NPs) and uniform quartz lens simultaneously. Experimental results showed that the packaging structure proposed in this paper could significantly enhance the light output power, reduce the junction temperature, and increase the emission angle compared with the encapsulation layer consisting silicone only. When the NPs concentration increased from 0.1 to 0.4 wt%, the light output power increased from 7.6% to 17.4% at the forward current of 800 mA. Meanwhile, the junction temperature decreased by 5.7 °C, while the emission angle increased by 11.3°. What is more, it was found that the enhancement of light output power depended on the NPs concentration and showed the maximum at the concentration of 0.4 wt%. The enhanced light output power was attributed to the additional light scattering and the increased average refractive index resulted from the NPs introduced in the proposed package structure.

14 February 2017 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
RLRenli Liang
Renli Liang
JZJun Zhang
Jun Zhang
SWShuai Wang
Shuai Wang
QCQian Chen
Qian Chen
LXLinlin Xu
Linlin Xu
CCChangqing Chen
Changqing Chen
Flip-chip ultraviolet light-emitting diode (FC UV-LED) fabricated by direct AuSn eutectic package is of high interest in Research and Development due to its excellent thermal performance and good reliability. However, the voids in eutectic bonding layer due to the lack of AuSn filled have a big influence on the thermal management and optical performance of FC UV-LEDs, and it is believed that the eutectic voids can affect the thermal-conduction resistance (the following unified called thermal resistance) and the junction temperature of FC UV-LEDs. In this paper, modeling and thermal simulation using finite element analysis is developed by considering the geometrical model of eutectic FC UV-LEDs with 3%, 10%, 20%, and 30% bonding voidage. Meanwhile, to validate the simulation, the thermal parameters of FC UV-LEDs are determined and measured using thermal transient tester, and it is found that UV-LED with 3% voidage shows lowest thermal resistance and junction temperature compared with the other samples in both simulation and experiment. Moreover, the optical performance of UV-LEDs is evaluated via the photoelectric analysis system, and the results confirm that the lowest thermal resistance leads to the lowest junction temperature but the highest light output power.

16 April 2018 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
LXLinlin Xu
Linlin Xu
RLRenli Liang
Renli Liang
JDJiangnan Dai
Jiangnan Dai
HLHanling Long
Hanling Long
SWShuai Wang
Shuai Wang
CCChangqing Chen
Changqing Chen
In this paper, a structure was proposed to promote thermal management of deep ultraviolet light-emitting diodes (DUV-LEDs) by introducing the aluminum nitride (AlN) ceramic substrate fabricated with copper-filled thermal holes (CFTHs). Different numbers of CFTHs ($0,2x 2, 3x3$, and $4x4$) were formed in AlN ceramic substrates using direct-plated-copper process. The thermal resistance of DUV-LEDs was determined by a thermal transient tester. Meanwhile, to validate the experiment results, thermal simulation using finite element analysis was developed by considering the various model of AlN ceramic substrates. Experimental results indicated that the thermal resistance and junction temperature decreased with the increasing number of CFTHs. Compared with a conventional structure, the thermal resistance of DUV-LED-based $4x 4$ CFTHs was reduced by 34.6% and its junction temperature was decreased by 7.3 °C at 100 mA. This approach is believed to provide a simple and effective strategy for improving the heat dissipation and thermal reliability of DUV-LEDs.

29 September 2016 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
RLRenli Liang
Renli Liang
JZJun Zhang
Jun Zhang
SWShuai Wang
Shuai Wang
TDTaotao Ding
Taotao Ding
JDJiangnan Dai
Jiangnan Dai
CCChangqing Chen
Changqing Chen
In this paper, the effects of eutectic voids in bonding area on the thermal resistance and light output power of flip-chip ultraviolet light-emitting diode (UV-LED) devices have been studied by experiments in detail. It has been demonstrated that the eutectic voids effectively influenced the thermal resistance, the junction temperature, and the light output power of the UV-LEDs. The UV-LEDs with lower eutectic voidage exhibited a superior thermal performance based on the thermal resistance analysis. The thermal resistance was greatly reduced by 48% and the junction temperature by 3.5 °C as the driving current was 800 mA when the eutectic voidage decreased from 30% to 3%. As a consequence, a maximal enhancement of 13.3% of light output power was obtained when the LED was driven by a current of 1500 mA. These results confirmed that a better performance of eutectic flip-chip UV-LED can be obtained with lower eutectic voidage for the reason that the thermal resistance and junction temperature can be decreased effectively.

8 July 2024 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
YDYongjie Ding
Yongjie Ding
LXLinlin Xu
Linlin Xu
QWQing Wang
Qing Wang
RLRenli Liang
Renli Liang
YPYang Peng
Yang Peng
MCMingxiang Chen
Mingxiang Chen
Heat accumulation seriously affects the photothermal performances of high-power deep-ultraviolet light-emitting diodes (DUV LEDs). In this letter, plated copper on thick film (PCTF) diamond substrates were proposed to enhance the heat dissipation of high-power DUV LEDs. The thermal resistance of PCTF-diamond substrate is only 1.064 K/W, which is 53.6% lower than that of the PCTF-Al2O3 substrate (2.293 K/W). The DUV LEDs packaged by PCTF-diamond substrates achieve excellent optical and thermal performances. Under a high current of 0.7 A, the light output power of DUV LEDs packaged by PCTF-diamond substrate reaches 180.4 mW, which is 20.3% higher than that of DUV LEDs packaged by PCTF-Al2O3 substrates (150 mW). Meanwhile, the PCTF-diamond substrate enables a surface temperature of 158°C for DUV-LEDs, which is 43°C lower than the PCTF-Al2O3 substrate (201°C). It is obvious that the PCTF-diamond substrate can effectively improve the photothermal performances of DUV LEDs, which is of great significance for heat dissipation in high-power devices.