20 March 2017 in Rapid Prototyping Journal
Purpose: Recently, the constrained surface projection stereolithography (SL) technology is gaining wider attention and has been widely used in the 3D printing industry. In constrained surface projection SL systems, the separation of a newly cured layer from the constrained surface is a historical technical barrier. It greatly limits printable size, process reliability and print speed. Moreover, over-large separation force leads to adhesion failures in manufacturing processes, causing broken constrained surface and part defects. Against this background, this paper investigates the formation of separation forces and various factors that affect the separation process in constrained surface projection SL systems. Design/methodology/approach: A bottom-up projection SL testbed, integrated with an in-situ separation force measurement unit, is developed for experimental study. Separation forces under various manufacturing process settings and constrained surface conditions are measured in situ. Additionally, physical models are constructed by considering the liquid resin filling process. Experiments are conducted to investigate influences of manufacturing process settings, constrained surface condition and print geometry on separation forces. Findings: Separation forces increase linearly with the separation speed. The deformation and the oxygen inhibition layer near the constrained surface greatly reduce separation forces. The printing area, area/perimeter ratio and the degree of porousness of print geometries have a combined effect on determining separation forces. Originality/value: This paper studied factors that influence separation force in constrained surface SL processes. Constrained surface conditions including oxygen inhibition layer thickness, deformation and oxygen permeation capability were investigated, and their influences on separation forces were revealed. Moreover, geometric factors of printing layers that are significant on determining separation forces have been identified and quantified. This study on separation forces provides a solid base for future work on adaptive control of constrained surface projection SL processes.
28 June 2018 in Journal of Manufacturing Science and Engineering
In projection stereolithography (SL) processes, the separation of a newly cured layer from the constrained surface is a historical technical barrier and still greatly limits its printable size, process reliability, and print speed. This paper presents an approach to reduce the separation force in projection SL processes by texturing the constrained surface with radial microgroove patterns. Separation forces with conventional smooth constrained surface and textured surface are both modeled. The analytical model suggests that a proper design of micropatterns of the constrained surface is capable of reducing separation forces greatly. Furthermore, a projection SL testbed with online separation force monitoring unit is developed for experimental study. Experimental results verified the effectiveness of microsurface textures in reducing separation forces. Test cases also show that with the help of the proposed textured constrained surface, parts with wide solid cross sections that could not be printed using conventional methods were manufactured successfully. The influence of the textured constrained surface on the printed parts' surface roughness is studied, a gray scale projection approach is proposed to eliminate the influence and improve the surface quality of printed parts. Hence, the presented methods can help to improve the manufacturing capability of Projection SL processes.
2 April 2018 in Journal of Manufacturing Science and Engineering
Oxygen inhibition has been proved capable of reducing the separation force and enabling successful prints in constrained surface vat photopolymerization (CSVP) based three-dimensional (3D) printing processes. It has also been demonstrated as a key factor that determines the feasibility of the newly developed CSVP-based continuous 3D printing systems, such as the continuous liquid interface production. Despite its well-known importance, it is still largely unknown regarding how to control and enhance the oxygen inhibition in CSVP. To close this knowledge gap, this paper investigates the constrained surface design, which allows for continuous and sufficient air permeation to enhance the oxygen inhibition in CSVP systems. In this paper, a novel constrained surface with air-diffusion-channel is proposed. The influences of the air-diffusion-channel design parameters on the robustness of the constrained surface, the light transmission rate, and light intensity uniformity are studied. The thickness of the oxygen inhibition layer associated with the proposed constrained surface is studied analytically and experimentally. Experimental results show that the proposed air-diffusion-channel design is effective in maintaining and enhancing the oxygen-inhibition effect, and thus can increase the solid cross section size of printable parts.