The reliability of DC-link capacitor-banks (CBs) encounters many challenges due to their usage in electric vehicles. Heavy shocks may damage the internal capacitors without shutting down the CB. The fundamental development obstacles of CBs are: lack of considering capacitor degradation in reliability assessment, the impact of unforeseen sudden internal capacitor faults in forecasting CB lifetime, and the faults consequence on CB degradation. The sudden faults change the CB capacitance, which leads to reliability change. To more accurately estimate the reliability, the type of the fault needs to be detected for predicting the correct post-fault capacitance. To address these practical problems, a new CB model and reliability assessment formula covering all fault types are first presented, then, a new analog fault-detection method is presented, and a combination of online-learning long short-term memory (LSTM) and fault-detection method is subsequently performed, which adapt the sudden internal CB faults with the LSTM to correctly predict the CB degradation. To confirm the correct LSTM operation, four capacitors degradation is practically recorded for 2000-hours, and the off-line faultless degradation values predicted by the LSTM are compared with the actual data. The experimental findings validate the applicability of the proposed method. All experimental codes-data are attached.
Capacitor banks (CBs) play a crucial role in energy storage and frequency control within autonomous microgrids. However, the impact of internal capacitor configurations, varying in terms of equivalent series resistance (ESR), capacitance, and rated voltage, on CB degradation, reliability, and peak current remains an understudied aspect. Moreover, the absence of a capacitance degradation coefficient in the standard MIL-HDBK-217 equations for predicting the reliability of electrolytic capacitors poses a significant challenge. To address these issues, this study examines a microgrid composed of diverse renewable energy systems, featuring nine distinct CB arrangements. The design of CBs considers both capacitance and peak output current individually. An evaluation is conducted to compare construction costs, lifetimes, and peak output currents across all layouts. Additionally, a novel formula is introduced to estimate the reliability and lifetime of CBs, while an existing formula for calculating CB peak output current is enhanced. The research explores the impact of ambient temperature and capacitor voltage on the reliability of various capacitor designs, proposing a novel framework for assessing CB reliability based on MIL-HDBK-338B, which accounts for both short-circuit and open-circuit faults. The practicality of these findings is confirmed through a comparison of experimental and simulation results. The inverter operation video, simulation, and all production data including PCB and processor codes are also attached.
Cascaded multilevel inverters (MLIs) generate an output voltage using series-connected power modules that employ standard configurations of low-voltage components. Each module may employ one or more switched capacitors to double or quadruple its input voltage. The higher number of switched capacitors and semiconductor switches in MLIs compared to conventional two-level inverters has led to concerns about overall system reliability. A fault-tolerant design can mitigate this reliability issue. If one part of the system fails, the MLI can continue its planned operation at a reduced level rather than the entire system failing, which makes the fault tolerance of the MLI particularly important. In this paper, a novel fault location technique is presented that leads to a significant reduction in fault location detection time based on the reliability priority of the components of the proposed fault-tolerant switched capacitor cascaded MLI (CSCMLI). The main contribution of this paper is to reduce the number of MLI switches under fault conditions while operating at lower levels. The fault-tolerant inverter requires fewer switches at higher reliability, and the comparison with similar MLIs shows a faster dynamic response of fault detection and reduced fault location detection time. The experimental results confirm the effectiveness of the presented methods applied in the CSCMLI. Also, all experimental data including processor code, schematic, PCB, and video of CSCMLI operation are attached.
12 January 2026 in IEEE Open Journal of the Industrial Electronics Society
Multilevel power inverters have a complex semiconductor structure which elevates the risk of switch faults. Furthermore, voltage drops across floating capacitors, which are integral components of multilevel power converter structures, can disrupt accurate system status assessment and lead to incorrect or delayed fault detection. This paper proposes a novel approach for short-circuit fault detection and location in multilevel power converters using artificial intelligence with a focus on reliability prioritization. Five reference voltage prediction methods were analyzed including a switching algorithm and four deep learning-based techniques i.e., convolutional neural networks, gated recurrent units, long short-term memory networks and a hybrid model combining convolutional neural networks with long short-term memory networks. Fault location was performed through a reliability-based strategy prioritizing components with higher failure probabilities, significantly improving the fault identification speed. Our method reduced the duration of fault detection compared to similar methods and included a novel fault location method based on prioritizing fault detection according to the lifetime of fundamental components. We predicted and verified online voltage references using four different deep learning methods and compare the outcomes in an experimental setup. Simulation and experimental results demonstrated the effectiveness and practicability of the proposed method in detecting and locating faults in various types of multilevel power inverters.