The rotor is an essential actuator of quadrotor UAV, and is prone to failure due to high speed rotation and environmental disturbances. It is difficult to diagnose rotor faults and identify the fault localization simultaneously. In this paper, we propose a fault diagnosis and localization scheme based on the Extended State Observer (ESO) and Deep Forest (DF). This scheme can accurately complete the fault diagnosis and localization for the quadrotor UAV actuator without knowing the fault size by combining the model-based and the data-driven methods. First, we obtain the angular acceleration residual signal of the quadrotor UAV by using ESO. The residual signal is the difference between the observed state of ESO and the true fault state. Then, we design the residual feature analysis method by considering the position distribution of the quadrotor UAV actuator. This method can embed the actuator fault localization information into the fault data by simultaneously considering pitch and roll of the quadrotor UAV. Finally, we complete the fault diagnosis and localization of the quadrotor UAV actuator by processing the fault data by using DF. This scheme has the advantages of straightforward observer modeling, strong generalization ability, adaptability to small sample data, and few hyperparameters. Our simulation results indicate that the accuracy of the proposed scheme reaches more than 99% for the unknown size of the quadrotor UAV actuator fault.
In this article, a fault diagnosis scheme based on the data-driven approach of hypersonic vehicles (HVs) is studied. First, the fault features are obtained by wavelet packet translation (WPT) processing. Second, an improved distance evaluation technique (DET) based on Spearman correlation analysis is used to select features and reduce dimensions. The designed enhanced WPT-DET (EWPT-DET) method can extract sensitive features based on self-defined attention coefficients. Third, the fault pattern recognition process is achieved by support vector regression (SVR) with genetic algorithm optimization. The SVR classifier with high dimensional linear fitting ability is very suitable for HVs' reaction control system with sensor faults. The method is further used in locating and diagnosing multisensor fusion faults. Moreover, the fault occurrence time of single sensor timing faults is judged. Finally, simulation studies are provided to illustrate the enhanced performance of the proposed approach.
This paper presents a generic robust controller that allows applications in various quadrotor unmanned aerial vehicle (UAV) systems effectively even when facing severe system uncertainties and unknown external disturbances. The fractional-order linear active disturbance rejection control (FOLADRC) scheme has combined the advantages of the fractional-order PID (FOPID) with the linear active disturbance rejection control (LADRC). Firstly, the structure of the FOLADRC-based quadrotor UAV is designed. Then, considering the difficulty of parameter tuning of FOLADRC and the demand for accuracy and rapidity of the controller, the improved sparrow search algorithm is applied. Finally, to illustrate the robustness and effectiveness of FOLADRC, the FOLADRC-based quadrotor UAV is firstly compared with PID and LADRC. The simulation and experiment results show that the FOLADRC method can suppress the influence of system uncertainties and external disturbance effectively, where the superiority compared to PID and LADRC has been demonstrated clearly.
Active disturbance rejection control (ADRC) is a model-independent method widely used in passive fault-tolerant control of the quadrotor unmanned aerial vehicle. While ADRC’s effectiveness in actuator fault treatment has been proven, its tolerance to sensor faults requires improvements. In this paper, an ADRC-based active fault-tolerant control (AFTC) scheme is proposed to control the flying attitude against sensor fault for reliability enhancement. Specifically, a semi-model-dependent state tracker is raised to reduce the influence of slow tracking, and accentuate the sensor fault even in varying maneuvers. Derived from the random forest, an enhanced method named auto sequential random forest is designed and applied to isolate and identify faults in real time. Once the tolerance compensation is generated with the fault information, a high-performance AFTC is achieved. The simulation results show that the proposed method can effectively follow the residual when a sensor fault and a change of maneuver occur concurrently. Precise fault information is obtained within 0.04 s, even for small faults on the noise level. The diagnosis accuracy is greater than 86.05% (100% when small faults are excluded), and the identification precision exceeds 97.25%. The short settling time (0.176 s when the small fault is excluded) and modest steady-state error validate the advanced and robust tolerance performance of the proposed AFTC method.
Due to the harsh working environment, Near-Space Hypersonic Vehicles (NSHVs) have the characteristics of frequent faults, which seriously affect flight safety. However, most researches focus on active fault-tolerant control for actuator faults. In order to fill the gap of active fault-tolerant control for sensor faults, this paper presents an Active Fault-Tolerant Control (AFTC) strategy for NSHVs based on Active Disturbance Rejection Control (ADRC) combined with fault diagnosis and evaluation. With the proposed AFTC strategy, both sensor faults and actuator faults can be compensated within s. Wavelet packet decomposition and Kernel Extreme Learning Machine (KELM) are associated to ensure the high accuracy and real-time ability of fault diagnosis. Simulation results show that the proposed fault diagnosis method can significantly reduce the divergence of diagnosis results by up to 98%. The fault information is used to generate tolerant compensation, which is combined with the ADRC to achieve AFTC. Statistical results indicate that AFTC has significantly lower static error than ADRC. The proposed AFTC method endows NSHVs with the ability to complete missions even when various types of faults appear. Its advantages are demonstrated in comparison with other fault diagnosis and tolerant control methods.