8 March 2009 in Experiments in Fluids
The vortex organization of cylinder wakes is experimentally studied by time-resolved tomographic Particle Image Velocimetry at Reynolds numbers ranging from 180 to 5,540. Time resolved measurements are performed at Re = 180, 360 and 540, whereas the transitional (Re = 1,080) and turbulent regimes (Re = 5,540) are investigated by snapshots separated in phase by more than π/4. The vortex structure evolution is visualized by the 3D vorticity field, revealing a regular shedding at the lowest Reynolds, whereas at Re > 500 the Bénard-Kármán vortex street exhibits counter-rotating stream-wise vortex pairs (characteristic of Mode B) dominating the 3D motion. The regime at Re = 360 produces a transitional pattern where the counter-rotating vortex pairs (Mode B), coexist with profoundly distorted shedding of oblique elements forming a chain of rhombus-like vortex cells. In the turbulent flow regime (Re = 5,540) a large increase in the range of flow scales is directly observed with the appearance of Kelvin-Helmholtz type vortices in the separated shear layer consistently with what is abundantly reported in literature. The statistical description of the secondary structures is inferred from a 3D autocorrelation analysis yielding two span-wise wavelengths for the counter-rotating pairs, an inner length given by (twice) the distance between counter-rotating elements and an outer one given by the distance between pairs. The uncertainty analysis of the present tomographic PIV experiments reveals that this approach is suited for the investigation of vortex wakes with a typical error of 2 and 10% on the velocity and vorticity vectors, respectively.
6 July 2006 in Experiments in Fluids
15 December 2016 in Experiments in Fluids
Whole-field velocity measurement techniques based on ultrasound imaging (a.k.a. ‘ultrasound imaging velocimetry’ or ‘echo-PIV’) have received significant attention from the fluid mechanics community in the last decade, in particular because of their ability to obtain velocity fields in flows that elude characterisation by conventional optical methods. In this review, an overview is given of the history, typical components and challenges of these techniques. The basic principles of ultrasound image formation are summarised, as well as various techniques to estimate flow velocities; the emphasis is on correlation-based techniques. Examples are given for a wide range of applications, including in vivo cardiovascular flow measurements, the characterisation of sediment transport and the characterisation of complex non-Newtonian fluids. To conclude, future opportunities are identified. These encompass not just optimisation of the accuracy and dynamic range, but also extension to other application areas.
1 September 2018 in International Journal of Multiphase Flow
12 December 2010 in Experiments in Fluids
13 May 2020 in Acta Mechanica
A review is presented of measurement techniques to characterise dispersed multiphase flows, which are not accessible by means of conventional optical techniques. The main issues that limit the accuracy and effectiveness of optical techniques are briefly discussed: cross-talk, a reduced signal-to-noise ratio, and (biased) data drop-out. Extensions to the standard optical techniques include the use of fluorescent tracers, refractive index matching, ballistic imaging, structured illumination, and optical coherence tomography. As the first non-optical technique, a brief discussion of electrical capacitance tomography is given. While truly non-invasive, it suffers from a low resolving power. Ultrasound-based techniques have rapidly evolved from Doppler-based profiling to recent 2D approaches using feature tracking. The latter is also suitable for time-resolved flow studies. Magnetic resonance velocimetry can provide time-averaged velocity fields in 3D for the continuous phase. Finally, X-ray imaging is demonstrated to be an important tool to quantify local gas fractions. While potentially very powerful, the impact of the techniques will depend on the development of acquisition and measurement protocols for fluid mechanics, rather than for clinical imaging. This requires systematic development, aided by careful validation experiments. As theoretical predictions for multiphase flows are sparse, it is important to formulate standardised ‘benchmark’ flows to enable this validation.