9 December 2020 in IEEE Transactions on Plasma Science
In this article, the design approach for a V-band miniaturized oscillator with a pseudospark-based high-current-density sheet electron beam source is presented. The hollow cathode electron gun has been designed and developed. In the experiment, the ~10-A current in the hollow-cathode phase has been measured. The high-frequency structure comprised of a truncated sine waveguide slow wave structure (TSW SWS) with wideband-matched output couplers has been designed, optimized, and simulated. The simulations show good transmission characteristics of the structure. The operation of a backward-wave oscillator with the designed TSW SWS driven by a 10-A, 40-kV sheet electron beam has been investigated by using 3-D particle-in-cell simulations. The maximal output power of 70 kW has been attained in the simulation. Frequency tuning within the 10-GHz frequency band has been demonstrated.
9 December 2020 in IEEE Transactions on Plasma Science
In this article, an investigation has been performed to analyze the role of hollow cathode aperture wall profile on pseudospark (PS) discharge-based single gap sheet electron beam source. A simulation study using COMSOL Multiphysics has been carried out for different hollow cathode aperture wall profile parameters, such as thickness and radius of curvature of aperture wall. The role of hollow cathode aperture wall thickness ``t'' and the radius of curvature of aperture wall ``R'' for different gas pressures, 16-20 Pa, and the corresponding applied gap voltage 16-20 kV have been studied. The hollow cathode aperture wall thickness has been analyzed for the range of ~1-3 mm, keeping the constant aspect ratio 12:1, while the radius of curvature of aperture wall has been analyzed for the range of 0-3 mm for different wall thicknesses. Experimental studies have also been performed to analyze the role of the thickness of the aperture wall on PS discharge. A good correlation has been obtained between the simulation and experimental studies.
7 April 2026 in IEEE Transactions on Microwave Theory and Techniques
A plasma-based frequency-selective limiter (FSL) using evanescent-mode (EVA) cavity resonators is proposed and experimentally demonstrated. Sealed gas-discharge tubes (GDTs) are integrated into a pair of coupled cylindrical cavities that form the resonant branch of asecond-order absorptive bandstop filter. At low power, both plasma cells are off, and the resonant branch is synthesized to recombine in phase with a parallel delay line, yielding a well-matched, low-loss all-pass response with a narrow transparency window. When the incident power exceeds the breakdown threshold of one GDT, plasma ignition detunes the coupled modes and reverses the effective magnetic coupling, driving the phase difference toward 180° and producing a deep, narrow absorptive bandstop response. Alumped ABCD model with a Drude plasma representation and full 3-D RF–plasma–thermal COMSOL Multiphysics simulations capture both steady-state S-parameters and nanosecond-scale transients, thereby validating device operation. Measurements in a C-band prototype show 2.4dB insertion loss, 70dB isolation at 4.59GHz with a 10-dB fractional bandwidth of 2.9%, power handling beyond 100W and beyond 400MHz of tuning via capacitive loading, while harmonic spectroscopy and pulsed excitation confirm strong plasma nonlinearity and a response time of the order of 10ns suitable for robust, reconfigurable RF front-end protection.