For high-power and compact sub-terahertz (THz) sources, a high-current electron beam is a crucial component. In this article, a miniaturized sheet-electron-beam source has been developed for generation of the high-current-density electron beam. It consists of a hollow cathode with a 3-mm diameter circular aperture, an anode with a 1.25 mm $\times0.25$ mm rectangular aperture, and an interelectrode three-gap region with optimized dimension. The developed electron beam source has been operated in self-breakdown conditions for applied gap voltage ranging between 10 and 30 kV. The sheet electron beam has been successfully propagated for nearly 45 mm inside the drift space without the assistance of an external magnetic field due to the space charge neutralization effect. It has demonstrated good transmission characteristics with more than 50-A beam current and beam current loss of around 25%.
9 December 2020 in IEEE Transactions on Plasma Science
In this article, the design approach for a V-band miniaturized oscillator with a pseudospark-based high-current-density sheet electron beam source is presented. The hollow cathode electron gun has been designed and developed. In the experiment, the ~10-A current in the hollow-cathode phase has been measured. The high-frequency structure comprised of a truncated sine waveguide slow wave structure (TSW SWS) with wideband-matched output couplers has been designed, optimized, and simulated. The simulations show good transmission characteristics of the structure. The operation of a backward-wave oscillator with the designed TSW SWS driven by a 10-A, 40-kV sheet electron beam has been investigated by using 3-D particle-in-cell simulations. The maximal output power of 70 kW has been attained in the simulation. Frequency tuning within the 10-GHz frequency band has been demonstrated.
The alignment within the required tolerance between components like electron beam source, beam-wave interaction structure and spent beam collector is a major challenge in the realization of the high-power vacuum-tube sub-THz source. To overcome this major issue, a novel integrated W-band beam-wave interaction circuit along with spent beam collector and beam adapter region has been designed and developed on two planar metallic plates itself for the first time. It accomplished the level of required alignment of different components of a sub-THz source. This interaction circuit along with beam adapter region and spent beam collector has been developed on a single plate. These structures have been developed using optimized micro-milling techniques with achieved dimensional deviation less than < 7 μm. The average surface roughness is found to be around 100 nm, which is much less than the skin depth in the W band.
9 December 2020 in IEEE Transactions on Plasma Science
In this article, an investigation has been performed to analyze the role of hollow cathode aperture wall profile on pseudospark (PS) discharge-based single gap sheet electron beam source. A simulation study using COMSOL Multiphysics has been carried out for different hollow cathode aperture wall profile parameters, such as thickness and radius of curvature of aperture wall. The role of hollow cathode aperture wall thickness ``t'' and the radius of curvature of aperture wall ``R'' for different gas pressures, 16-20 Pa, and the corresponding applied gap voltage 16-20 kV have been studied. The hollow cathode aperture wall thickness has been analyzed for the range of ~1-3 mm, keeping the constant aspect ratio 12:1, while the radius of curvature of aperture wall has been analyzed for the range of 0-3 mm for different wall thicknesses. Experimental studies have also been performed to analyze the role of the thickness of the aperture wall on PS discharge. A good correlation has been obtained between the simulation and experimental studies.
6 November 2018 in IEEE Transactions on Electron Devices
This paper presents a novel approach for computation of high-order axial modes (HOAMs) in a conventional and uptapered gyrotron resonator. A code has been developed which computes the eigenfrequency, Q-factor and axial field profile of HOAMs in the absence of electron beam in the resonator. Cyclic coordinate search method has been used for the optimization of complex eigenfrequencies, which obviates the computation of gradients of radiation boundary conditions and, hence, reduces computational complexity. HOAMs have been computed for resonators operating at 10, 132, 203, and 424 GHz, and the results obtained have been found to be in good quantitative agreement with the experimental and numerical data available in the published literature. Broadband continuous frequency tuning bandwidth found for subterahertz resonators also agrees well with the published results. HOAMs computed for 1-THz gyrotron resonator designed at CSIR-CEERI have also been presented.
29 December 2022 in IEEE Transactions on Electron Devices
In this article, the electrical characterization of a plasma-assisted electron beam source with a sub-mm sheet aperture has been performed. The developed sheet electron beam source comprises a hollow cathode cavity, two floating anodes, and one ground potential anode with a sheet aperture of $1.5\times0.3$ mm. The source has been characterized under varying applied gap potential range, i.e., 10–30 kV in self-breakdown operating mode. The breakdown parameters and resultant beam parameters, such as ${V} - {I}$ characteristics, electron beam current density, duration to reach the conductive phase, and the energy transformation efficiency of the developed source, have been analyzed. The successive breakdown phenomenon has also been presented in the profile of the developed electron beam source.